Marine Store Group 35
Hose & Couplings
Brass and stainless air hose couplings, lock type couplings, line and branch couplers and quick connect socket and plug sets, listed under IMPA group 35.
At A Glance
| Store group | 35 |
|---|---|
| Catalogue items | 7 |
| Typical buyers | Engineers maintaining service air lines |
| Supplied from | Suzhou, Jiangsu, China |
| Ships with | All other store groups in one consolidated consignment |
Items In This Group
7 Products In Group 35
Who This Group Is For
- Engineers maintaining service air lines
- Bosuns running pneumatic deck tools
- Ship chandlers supplying engine room stores
- Shipyard and repair teams
Problems It Solves
- Air leaks at the coupling that starve a scaling tool of pressure
- Sockets and plugs from different type families that will not mate
- Brass fittings failing where a stainless or steel body was required
- No reference code on board, so the replacement never matches
What You Get
- Socket and plug families listed with the IMPA code for both SUS304 and #45 steel bodies
- Hose end and threaded end variants shown side by side
- Type A and Type B end types stated so mating parts can be confirmed
- Brass, lock type and universal couplings kept in the same group
Why Buy This Group From Us
- Full socket and plug code tables shown on the product page
- Material choice stated for each code
- Matched to the pneumatic tools in group 59
- Reorderable by exact item number
Application Scenarios
Where Group 35 Items Are Used On Board
Service air lines for deck and engine room
Pneumatic scaling and needle gun supply lines
Tank cleaning and hold cleaning gun supply
Workshop air distribution
Related Reading
Solutions Industries And Guides Linked To This Group
Solution
Cargo Hold And Tank Cleaning
IndustryContainer And General Cargo Ships
ChecklistFire Station And Life Saving Store Checklist
Other Store Groups
Answers
Hose & Couplings Questions
Can I mix socket and plug types
No. The manufacturer sheet states that the same type socket and plug must be connected across; different types cannot be mated.
What materials are available
The quick connect range is listed in SUS304 stainless and in #45 steel, each with its own IMPA code.
What sizes are covered
The tables cover hose ends from 1/4" to 1" and threaded ends from R1/8" to R1" and Rc1/4" to Rc1".
Will these couplings suit the pneumatic scaling tools
Yes. The couplings in this group are selected to serve the air tools listed in group 59; confirm the ship's existing standard before ordering.
Next Step
Need A Quotation For Group 35
Send the item codes or just the descriptions. We will match them to the catalogue and quote.