5W Recessed LED Downlight
Part number CRDL-5w; CRDL-15W
Within the Recessed LED Downlights line, 5W Recessed LED Downlight is the recessed LED downlight specified for hotel, residential and commercial ceilings in quantity. It draws 1W, with a 8° 15° 30° 45° 60° beam angle, an input of 24VAC/DC 100-240VAC 50-60Hz and LED emitters. Downlights are bought by the hundred, so unit cost and cut-out decide everything. It is catalogued as CRDL-5w; CRDL-15W.
- Power
- 5x1W/5x3W
- Beam Angle
- 8° 15° 30° 45° 60°
- Life Span
- 50000Hours
- Input Voltage
- 24VAC/DC 100-240VAC 50-60Hz
What This Model Gives You
8° 15° 30° 45° 60° beam angle
Beam angle is specified as part of the product rather than left as a surprise on site.
Stated LED life of 50000Hours
A published life figure gives a maintenance interval you can plan replacement stock around.
Against the 3W-per-LED build of this same fitting
More light on the floor from the same ceiling opening, at higher power draw.
Against an integrated LED downlight with a sealed driver
A serviceable driver arrangement rather than replacing the whole fitting.
Technical Data For 5W Recessed LED Downlight
Every figure below is taken from the manufacturer's specification for this model. Where a value is not listed it is not published, and we will confirm it against current production before you order.
| Item No | CRDL-5w; CRDL-15W |
|---|---|
| Input Voltage | 24VAC/DC 100-240VAC 50-60Hz |
| Output Current | 350-700mA |
| Light Source | LED |
| Power | 5x1W/5x3W |
| Color | WW/CW/Y/R/B/G |
| Beam Angle | 8° 15° 30° 45° 60° |
| Operation Temperature | -20°-+50° |
| Fixture Material | Aluminium |
| Life Span | 50000Hours |
| Surface Color | Silver/Brass/Shining White/Matt White |
How It Is Built
- Light source: LED
- Electrical input: 24VAC/DC 100-240VAC 50-60Hz
Buyers This Model Suits
- Retail and hospitality refurbishment buyers
- Fit-out contractors buying in volume
- Electrical distributors stocking recessed downlights
- Residential developers and landlords
Application Scenarios
- Hotel corridors and back-of-house
- Retail general ceiling lighting
- Office circulation areas
- Apartment and residential ceilings
Objections This Model Removes
A project needs two output levels but the ceiling only has one cut-out size
Cost per fitting decides whether a hundred-downlight job proceeds at all
Mixed downlight ranges look inconsistent across one building
Part numbers are ambiguous between the two drive builds
How This Product Is Made
Production runs at our Shenzhen plant, Shenzhen Chiclits Technology Co., Ltd..
Aluminium housing production and finishing
LED board population at the specified drive level
Driver assembly and spring clip fitting
Output verification and packing
What Gets Checked
- Drive current verification against the ordered build
- Housing dimension check against the published cut-out
- Spring clip retention test
- Colour consistency across the production batch
What You Can Change
- Colour temperature selected at order stage
- Housing finish specified on project orders
- Carton quantity adapted to site delivery
- 1W-per-LED or 3W-per-LED build
Certification
Our LED bulb line holds CE (LVD) and RoHS certificates issued by Shenzhen BST Technology, with the numbers published on our Trust page. Ask us in writing for the certification position on this specific model before you quote it into a regulated market - we will tell you what is held and what is not.
How It Compares With The Alternatives
| Compared with | What changes |
|---|---|
| The 3W-per-LED build of this same fitting | More light on the floor from the same ceiling opening, at higher power draw |
| An integrated LED downlight with a sealed driver | A serviceable driver arrangement rather than replacing the whole fitting |
| A halogen downlight in the same aperture | A fraction of the load and far less heat in the ceiling void |
Getting It Right On Site
Order all downlights for one building together for batch consistency
Allow ventilation clearance above the fitting in an insulated ceiling
Confirm the cut-out with us before the ceiling is drilled
Choose the 3W build where ceilings are high or the space needs more light
Other Models In Recessed LED Downlights
Where This Product Fits A Build
5W Recessed LED Downlight Questions
What beam angle is this model?
8° 15° 30° 45° 60°. Beam angle is a separate part number in this range, so order the angle you need rather than adjusting on site.
Can I mix these with the smart downlights?
Yes. They ship together from the same plant, and mixing works well when only some rooms need control.
Which build should I order?
The 1W build where ambient fill is enough and cost matters, the 3W build where the ceiling is high or the space needs more light on the floor.
What cut-out does it need?
Ask us to confirm the exact hole size for this wattage before the ceiling is cut.
What does 5x1W or 5x3W mean?
Five LEDs driven at one watt each, or five LEDs driven at three watts each. Same fitting, two output levels, two part numbers.
What is the minimum order quantity and lead time for this model?
Both depend on the configuration, the packaging and the quantity, and neither is published as a blanket figure. Send us the model and quantity by email and we will confirm in writing.
Get Pricing For 5W Recessed LED Downlight
Send the quantity and destination market. We reply with pricing, packaging options, lead time and a written position on certification.