150 LED Solar Motion Sensor Wall Light
Within the Solar LED Lamps line, 150 LED Solar Motion Sensor Wall Light is the solar LED lamp specified for gardens, paths, gates and outbuildings with no mains supply. It is specified with ingress protection IP65, 150pcs 2835 LED emitters and charging time of 6-8h. Self-powered products have no installation support burden at retail.
What This Model Gives You
Ingress protection IP65
The sealing grade is stated as part of the specification instead of being described loosely as waterproof.
Polysilicon solar panel + Copper wire + Plastic construction
The material is what gives the LED a heat path, and heat is what decides how long the product actually lasts.
Against a mains PIR security light
Installs anywhere in minutes, at the cost of runtime on short winter days.
Against a mains-powered outdoor light
No trenching, no cable and no electrician anywhere in the job.
Technical Data For 150 LED Solar Motion Sensor Wall Light
Every figure below is taken from the manufacturer's specification for this model. Where a value is not listed it is not published, and we will confirm it against current production before you order.
| Solar Panel | 6V, 3W |
|---|---|
| Battery | 3.7V, 4000mAh 18650 Li-ion battery |
| Charging Time | 6-8h |
| Waterproof | IP65 |
| Cable Length | 5m |
| Solar Panel Size | 180*155*15mm |
| Light Size | 178*138*110mm |
| Material | Polysilicon solar panel + Copper wire + Plastic |
| Light Source | 150pcs 2835 LED |
| Light Color | Pure white/ Warm white |
| Package Included | 1 x Solar Panel |
| Function Introduction | Switching mode: manual switch + light control sensor + microwave radar body sensing |
| Radar Body Sensing Function | 1. Installation height 3-5 meters. In the open environment, the human sensing distance is 5-7 meters. |
| Prev | end Next |
How It Is Built
- Light source: 150pcs 2835 LED
- Construction: Polysilicon solar panel + Copper wire + Plastic
- Ingress protection: IP65
- You can use in home, garden, balcony, any other place as you like.
- Environment friendly and low power consumption.
- Recharged by sunlight for store power.
Materials
- Polysilicon solar panel
- Copper wire
- Plastic
Buyers This Model Suits
- Property owners lighting paths, gates and outbuildings
- Garden centre and hardware buyers
- E-commerce sellers in outdoor and home categories
- Smallholders and growers
Application Scenarios
- Outbuilding and shed security lighting
- Allotment and smallholding pest deterrence
- Seasonal retail promotions in outdoor categories
- Garden path, driveway and gate lighting
Objections This Model Removes
Security lights that burn all night exhaust a small battery
Garden retail needs seasonal lines that do not generate support calls
Growers need deterrence rather than illumination
Outdoor lighting needs a cable run nobody wants to pay for
How This Product Is Made
Production runs at our Shenzhen plant, Shenzhen Chiclits Technology Co., Ltd..
Solar panel and battery module assembly
LED board population and lens fitting
Sensor calibration where the model includes one
Weatherproof sealing and charge cycle test
What Gets Checked
- Output verification and packing drop test
- Charge cycle verification under controlled light
- Sensor trigger and threshold test where fitted
- Weatherproof seal integrity check
What You Can Change
- Instruction sheet translated for your market
- Colour temperature selected at order stage
- Mounting accessory set for wall or ground fixing
- Own-brand packaging for retail
Certification
Our LED bulb line holds CE (LVD) and RoHS certificates issued by Shenzhen BST Technology, with the numbers published on our Trust page. Ask us in writing for the certification position on this specific model before you quote it into a regulated market - we will tell you what is held and what is not.
How It Compares With The Alternatives
| Compared with | What changes |
|---|---|
| A battery lamp without a panel | Recharges itself daily instead of needing battery changes |
| A mains PIR security light | Installs anywhere in minutes, at the cost of runtime on short winter days |
| A mains-powered outdoor light | No trenching, no cable and no electrician anywhere in the job |
Getting It Right On Site
Keep the panel clean through the season or runtime falls
Position a sensor model so movement crosses the detection zone
Allow a full day of charging before first use
Mount the panel where it gets direct sun for most of the day
Other Models In Solar LED Lamps
150 LED Solar Motion Sensor Wall Light Questions
What is the ingress protection rating?
IP65. Ask us to confirm this in writing if you are quoting into an outdoor tender.
Does it work through winter?
It works wherever the panel gets daylight. Short winter days collect less charge, so runtime falls.
Can the battery be replaced?
Ask us per model before committing to a large order - battery access differs between models.
How long does it run at night?
It depends on the charge collected that day and, on sensor models, on how often it triggers. Where runtime is not published we will confirm it against current production.
Can the batteries be replaced?
Ask us per model before committing to a large order - battery access differs between the wall light and the garden lamp.
What is the minimum order quantity and lead time for this model?
Both depend on the configuration, the packaging and the quantity, and neither is published as a blanket figure. Send us the model and quantity by email and we will confirm in writing.
Get Pricing For 150 LED Solar Motion Sensor Wall Light
Send the quantity and destination market. We reply with pricing, packaging options, lead time and a written position on certification.