DB25 Male To Male RS232 Serial Cable 10 Feet - Garfour view 1

DB25 Male To Male RS232 Serial Cable 10 Feet - Garfour view 2

DB25 Male To Male RS232 Serial Cable 10 Feet - Garfour view 3

DB25 Male To Male RS232 Serial Cable 10 Feet - Garfour view 4

DB25 Male To Male RS232 Serial Cable 10 Feet - Garfour view 5

Process Equipment Wiring Harness

DB25 Male To Male RS232 Serial Cable 10 Feet

A 10 foot D-Sub 25 pin male to male serial cable using tinned copper conductors. Industrial machines with RS232 control ports outlive the computers that drove them, so a reliable replacement cable in a specified length keeps older lines running.

Tinned copper conductors resist oxidation at the solder cups over long service life
10 foot length reaches from a control cabinet to a bench computer without an extension
Full 25 pin wiring keeps handshake lines available for legacy equipment
Moulded hoods protect the solder joints from repeated plug cycles

Samples ship within 3 days of confirmation. Bulk lead time is typically 7 to 12 days.

Problems It Solves

Generic serial cables often omit handshake pins and break older protocols
Short cables force the computer to sit inside the machine envelope
Untinned conductors corrode at the termination and cause intermittent faults

Who It Is For

Machine builders supporting installed equipment
Maintenance teams replacing failed serial cables
Instrument and automation integrators

Application Scenarios

RS232 control links on older CNC and process machinery
Instrument and test bench connections
Serial console access on industrial controllers

Technical Features

D-Sub 25 pin male to male
26AWG tinned copper conductors
10 feet length
RS232 serial wiring

Specifications

Connector	D-Sub 25 pin male to male
Wire Gauge	26AWG
Conductor	Tinned copper
Length	10 feet
Application	RS232 serial

Values shown are the standard build. Connector family, conductor gauge, circuit count and finished length are all build options.

Quality Control And Certification

Continuity And Circuit Verification. Verifies the physical arrangement sequence of the harness terminals and the circuit topology between them
Circuit Configuration Verification. Confirms that a complete, uninterrupted current flow path exists within each circuit
Terminal Retention Strength Test. Measures the mechanical reliability of the connection between the terminal and the wire
Ingress Protection Rating Test. Evaluates the dust and water resistance sealing performance of harness connectors

The company is certified to IATF 16949 and UL standards. Samples are confirmed prior to trial or mass production, and the approved sample is the reference for every repeat order.

Customization Options

Connector family and terminal type to your part numbers
Conductor gauge selected from the current per circuit
Finished length and breakout positions to your drawing
Jacket colour, marking and labelling to your scheme
Packing to your instruction, PE bag and carton as standard

Compared With The Alternatives

Null modem cables

A straight-through 25 pin build keeps the original equipment pinout intact

USB to serial adapters

A direct cable avoids driver dependence on the host computer

Use Guide

Tighten both jack screws so the hood cannot work loose from panel vibration
Keep the run away from motor drives to limit interference on unshielded signals
Confirm the required pinout before ordering if the machine uses a non-standard map

Other Assemblies In Process Equipment Wiring Harness

Microfit 3.0mm MX3.0 22 Pin Male Harness Wire - Garfour view 1

Process Equipment Wiring Harness Microfit 3.0mm MX3.0 22 Pin Male Harness Wire22-circuit Microfit 3.0mm harness for robots, storage systems and medical electronics View Specifications

Molex KK 396 and JST XH 3.96mm Pitch Cable Assembly - Garfour view 1

Process Equipment Wiring Harness Molex KK 396 and JST XH 3.96mm Pitch Cable Assembly2, 3 and 4 pin VH3.96 housing assemblies for electronics power and control View Specifications

JAE 36 Pin Industrial Control Cable With PVC Insulation - Garfour view 1

Process Equipment Wiring Harness JAE 36 Pin Industrial Control Cable With PVC Insulation36-circuit JAE control cable for internal communication in new energy equipment View Specifications

Guides That Cover This Build

Buying Guide

How To Specify A Custom Wire Harness For Quotation

What a harness manufacturer actually needs from you before a quotation means anything, and what happens when those details are missing.

Process Guide

Four Tests That Decide Whether A Wire Harness Is Sound

Continuity, circuit configuration, terminal retention and ingress protection, and what each one catches that the others do not.

Material Guide

Choosing Between UL2464 UL2514 And UL1007 Cable

Three cable constructions that cover most harness work, and how to tell which one your application needs.

DB25 Male To Male RS232 Serial Cable 10 Feet FAQ

Can you wire a custom pinout?

Yes. Send the pin-to-pin table or a sample cable and we build to it.

Are other lengths available?

Yes. 10 feet is the standard build and other lengths are quoted on request.

What lead time should we plan for on DB25 Male To Male RS232 Serial Cable 10 Feet?

Sample orders ship within 3 days of confirmation. Production lead time for bulk orders is typically 7 to 12 days, and we confirm the date against your quantity when we quote.

How is DB25 Male To Male RS232 Serial Cable 10 Feet packed for export?

Products are typically individually packed in PE bags and then boxed according to the specified quantity. Tell us any special packing requirement when you place the order.

Do you charge for samples of DB25 Male To Male RS232 Serial Cable 10 Feet?

Samples are charged for the sample and the shipping. The cost and the timing are confirmed with your quotation before anything is built.

Get A Price On DB25 Male To Male RS232 Serial Cable 10 Feet

Tell us the quantity, the finished length and any change to the connector set. We come back with the price, the lead time and a sample plan.

Chat On WhatsApp Email Our Engineers