Bright Solar Power Co., Ltd. · Wujiang, Jiangsu, China
Bright Solar Power Request a Quote

Single-Hole Solar Cable Entry Glands

Solar Cable Entry Single Hole White

BS090028-W BS090028WhiteSingle hole cable entry

The white single-gland roof feed-through — recyclable ABS, UV resistant, and half the weight of a metal equivalent.

  • Colour-matched to white vehicle roofs and decks
  • Watertight seal that protects the electrical connection permanently
  • ABS plastic, 100 % recyclable and UV resistant
  • 50 % weight reduction compared with a metal fitting

Product overview

What It Is and What It Does

The white BS090028 cable entry does the same job as the black housing on roofs where black hardware would stand out. It is a water-proof housing for fixing to the roof at the point where the solar panel cables enter, for use wherever a waterproof seal is required around the cable entry hole.

It is moulded in ABS plastic, is 100 % recyclable, is UV resistant and carries the same 50 % weight reduction the rest of the range is built around. It takes 6–12 mm cable and bonds to a clean surface with a sealant of your choosing.

Who it is for

  • Caravan and motorhome converters matching white roof hardware
  • Fleet workshops fitting identical solar installs across many vehicles
  • Marine fitters working on white decks and coachroofs
  • Retailers selling a colour-matched caravan solar accessory set

Problems it solves

  • Black fittings break up the look of an otherwise clean white roof
  • Sealant-only cable holes need re-doing every couple of seasons
  • Unsupported cable at a roof penetration flexes and eventually fatigues
  • Heavy metal glands are overkill on a thin composite vehicle roof

Key benefits and features

Why Buyers Choose BS090028-W

Benefits

  • Colour-matched to white vehicle roofs and decks
  • Watertight seal that protects the electrical connection permanently
  • ABS plastic, 100 % recyclable and UV resistant
  • 50 % weight reduction compared with a metal fitting

Technical features

  • Single-hole waterproof cable entry gland
  • Holds 6–12 mm cable
  • Material: ABS plastic in white
  • 100 % recyclable, UV resistant
  • Large sealing area, bonds to a clean surface
  • Provides a watertight seal around the cable entry hole
Specifications — BS090028-W
Product numberBS090028
ColourWhite
TypeSingle hole cable entry
Cable range6–12 mm
MaterialABS plastic
Packing100 pcs per outer carton
UV resistanceUV resistant
Recyclability100 % recyclable
Weight reduction vs metal50 %
Fixing methodBonded to a clean surface, sealant sold separately

Materials and manufacture

What It Is Made From

White ABS, UV resistant and 100 % recyclable. The same material family as the panel mounts, so a complete white installation — corner mounts, side profiles and cable entry — uses one plastic and one adhesive system.

Quality and certification

Everything in the BS090028-W table above is taken from our own product documentation — a 6–12 mm cable range. Nothing on this page is estimated or rounded up to make a better headline. If a tender needs a written certification or test statement, tell us which standard it names and we will say what we can supply.

Customisation

BS090028-W is the white version, and BS090028-B is the same part in black. The standard export pack is 100 pcs per outer carton. For a different pack quantity, a printed carton, or cable entry — single under your own label, tell us the annual volume you are planning and we will come back on what is possible and what it changes on price.

Comparison

How It Compares

Against the black BS090028-B

Same housing and the same 6–12 mm cable range. Colour choice only.

Against the white double-hole BS090025-W

Use the double where two cables cross the roof line; the single where one does.

Against a metal deck gland

Half the weight, no corrosion at the joint with an aluminium panel frame, and designed to be bonded rather than through-bolted.

Use guide

How to Fit It

  1. Step 1

    Plan the cable route and drill only for the cable.

  2. Step 2

    Degrease the roof around the hole.

  3. Step 3

    Bond the housing over the hole with a suitable sealant.

  4. Step 4

    Feed the cable through and tighten the gland.

  5. Step 5

    Allow the sealant to cure before exposing the roof to water.

Questions

Frequently Asked Questions

Does the white version seal as well as the black?

Yes — it is the same housing design and the same 6–12 mm cable range, moulded in white ABS.

Will it yellow?

The material is specified as UV resistant. Ask us for the current material statement if you need a written position for a tender.

What is the minimum order?

The standard export pack is 100 pieces per carton. Tell us your quantity and we will quote against it.

Can I use it with any solar cable?

Any cable between 6 mm and 12 mm outside diameter.

Ready to Order BS090028-W

Tell us how many BS090028-W you need and which port they are going to. We will confirm against the standard pack of 100 pcs per outer carton, quote freight and give you a lead time.