Bright Solar Power Co., Ltd. · Wujiang, Jiangsu, China
Bright Solar Power Request a Quote

Solar Panel Corner Mounts (150 mm)

Solar Panel Corner Mount 150 mm White

BS09009-W BS09009WhiteABS plastic

The white version of the BS09009 corner set — the usual choice on white caravan and motorhome roofs.

  • No roof penetration — the mount is bonded to the surface, so there is nothing to seal and nothing to leak
  • Acts as a wind deflector and keeps the correct air gap under the module for aeration
  • UV-resistant ABS that will not chalk or crack in service
  • 100 % recyclable and roughly 50 % lighter than an equivalent metal fixing

Product overview

What It Is and What It Does

The same four-piece ABS corner set as the black BS09009-B, moulded in white. On a white caravan or motorhome roof the white mount disappears into the surface, which matters more than it sounds: a roof-mounted array is the most visible modification on a vehicle, and rental fleets and converters generally want it to look like it came from the factory.

Function is unchanged. Four corner brackets bond to the roof, carry an aluminium-framed panel with a 150 mm lateral length, protect the module corners, hold the air gap underneath and deflect airflow over the leading edge.

Who it is for

  • Caravan and motorhome manufacturers fitting solar as a factory or dealer option
  • Rental and hire fleets that want the array to look standard across the fleet
  • Boat owners fitting panels to a white coachroof or hardtop
  • Accessory retailers selling into the European caravan aftermarket

Problems it solves

  • A black fixing on a white roof reads as an aftermarket add-on
  • Drilled fixings on a leased or resale vehicle reduce its value
  • Panels bonded flat to a roof cook themselves without an air gap
  • Unprotected module corners take damage during fit-out

Key benefits and features

Why Buyers Choose BS09009-W

Benefits

  • No roof penetration — the mount is bonded to the surface, so there is nothing to seal and nothing to leak
  • Acts as a wind deflector and keeps the correct air gap under the module for aeration
  • UV-resistant ABS that will not chalk or crack in service
  • 100 % recyclable and roughly 50 % lighter than an equivalent metal fixing
  • Colour-matched to standard white vehicle roofs

Technical features

  • Material: ABS plastic, white
  • Set of 4 corner mounts
  • Fits any aluminium-framed panel with a 150 mm lateral length
  • Four corner spoilers for solar modules, mounting on roof, boat, yacht or caravan
  • UV resistant and 100 % recyclable
  • 50 % weight reduction compared with a metal fixing
Specifications — BS09009-W
Product numberBS09009
ColourWhite
MaterialABS plastic
Set contents4 pcs per set
Lateral length150 mm
Fixing methodAdhesive bonded, no drilling
Packing4 pcs per set, 10 sets per outer carton
UV resistanceUV resistant
Recyclability100 % recyclable
Weight reduction vs metal50 %
Typical applicationsCaravan, motorhome, RV, boat, yacht

Materials and manufacture

What It Is Made From

White UV-resistant ABS, the same grade used on the black version. The colour is through the moulding rather than a coating, so a scuff on a roof edge does not expose a different colour underneath.

Quality and certification

Everything in the BS09009-W table above is taken from our own product documentation — 4 pcs per set and a 150 mm lateral length. Nothing on this page is estimated or rounded up to make a better headline. If a tender needs a written certification or test statement, tell us which standard it names and we will say what we can supply.

Customisation

BS09009-W is the white version, and BS09009-B is the same part in black. The standard export pack is 4 pcs per set, 10 sets per outer carton. For a different pack quantity, a printed carton, or corner mounts under your own label, tell us the annual volume you are planning and we will come back on what is possible and what it changes on price.

Comparison

How It Compares

Against the black BS09009-B

Same geometry, same packing, same compatibility. Pick by roof colour.

Against a mounting kit

If you want corner mounts and side brackets in one box for a single panel, the BS09009-Kits kit pairs this corner set with a short white side bracket set.

Against aluminium feet

Aluminium feet are stronger where you can bolt through, but they require you to drill. On a white vehicle roof, the bonded ABS route is what the range is designed around.

Use guide

How to Fit It

  1. Step 1

    Position the panel and mark the four corner locations on the roof.

  2. Step 2

    Degrease the roof and the base of each moulding.

  3. Step 3

    Apply ABS adhesive sealant to the bracket bases.

  4. Step 4

    Fit the mounts to the panel corners and bed the assembly onto the roof.

  5. Step 5

    Allow the adhesive to cure before the vehicle is moved.

Questions

Frequently Asked Questions

Is the white version any weaker than the black?

No. It is the same ABS moulding in a different colour, with the same set quantity, packing and panel compatibility.

Will the white yellow in sunlight?

The material is specified as UV resistant, which is why ABS was chosen for it. For a defined warranty position on colour hold, ask us for the current material statement.

How many sets fit in a carton?

Ten sets of four per outer carton.

Can I paint these to match a different roof colour?

The companion side mounts are supplied ready to paint. For the corner moulds, tell us the colour you need and we will confirm what is possible on your order.

Ready to Order BS09009-W

Tell us how many BS09009-W you need and which port they are going to. We will confirm against the standard pack of 4 pcs per set, 10 sets per outer carton, quote freight and give you a lead time.