
Caravan & RV Solar Mounting Kits
Caravan RV Solar Mount Kit with Short Side Brackets
Four white corner brackets plus a short white side bracket set — everything for bonding one panel to a caravan roof.
- Complete bonded fixing for one panel in a single part number
- No holes in the roof — the mounts bond to the surface
- Acts as a wind deflector and maintains the correct air gap under the panel
- White finish that matches standard caravan and motorhome roofs
Product overview
What It Is and What It Does
One box, one panel, no drilling. The BS09009 kit contains one set of four white corner brackets and one set of short white side brackets — the combination that fixes a single framed module to a caravan, motorhome or RV roof with nothing but adhesive.
Buying the kit instead of the loose parts removes the most common ordering mistake in this range, which is arriving on site with corner mounts and no side support, or side profiles in the wrong length. The kit is perfect for all kinds of RV, motor home and caravan solar installations, and it is the base kit of the four in the range.
Who it is for
- Caravan and motorhome owners fitting their first roof panel
- Dealers and workshops offering a fixed-price solar fitting service
- Accessory retailers who want one SKU per panel rather than three
- Converters building small production runs of identical vehicles
Problems it solves
- Ordering corner mounts and side profiles separately leads to mismatched or missing parts
- Drilling a habitation roof for a solar install is a warranty and leak problem
- A bonded panel with no air gap runs hot and gives up output
- Loose hardware on a shelf is hard to price and hard to sell as a fitting service
Key benefits and features
Why Buyers Choose BS09009-Kits
Benefits
- Complete bonded fixing for one panel in a single part number
- No holes in the roof — the mounts bond to the surface
- Acts as a wind deflector and maintains the correct air gap under the panel
- White finish that matches standard caravan and motorhome roofs
Technical features
- 1 set of 4 white corner brackets
- 1 set of short white side brackets
- ABS plastic, UV resistant
- Adhesive-bonded fixing, no drilling required
- For RV, motor home and caravan solar installations
- Wind deflector geometry with correct air gap under the module
| Product number | BS09009-Kits |
|---|---|
| Manufacturer | Bright Solar Power |
| Kit contents | 1 set of 4 white corner brackets, 1 set of short white side brackets |
| Colour | White |
| Material | ABS plastic |
| Side bracket length | Short — 180 mm BS090017 profile |
| Fixing method | Adhesive bonded, no drilling |
| Applications | RV, motor home, caravan, boat |
| Adhesive | Not included — ABS adhesive sealant required |
Materials and manufacture
What It Is Made From
All ABS, all white, all from the same moulding programme as the loose brackets — so a kit and a spare bracket bought later will match on colour and profile.
Quality and certification
Everything in the BS09009-Kits table above is taken from our own product documentation — a Short — 180 mm BS090017 profile side bracket. Nothing on this page is estimated or rounded up to make a better headline. If a tender needs a written certification or test statement, tell us which standard it names and we will say what we can supply.
Customisation
BS09009-Kits is the white version, and BS09009-B is the same part in black. For a different pack quantity, a printed carton, or mounting kits under your own label, tell us the annual volume you are planning and we will come back on what is possible and what it changes on price.
Comparison
How It Compares
Against the BS090018 kit
This kit carries a short side bracket; the BS090018 kit carries a 530 mm long side bracket for a larger panel.
Against buying loose brackets
Same parts, one part number and one carton. Simpler for a workshop, simpler on a shelf.
Against an aluminium bracket kit
Aluminium needs a fastener into the roof. This kit is designed so nothing penetrates the roof at all.
Use guide
How to Fit It
Step 1
Dry-fit the panel on the roof and mark every bracket position.
Step 2
Clean and degrease the roof and all bracket bases.
Step 3
Apply ABS adhesive sealant to each bracket base.
Step 4
Fit corners first, then the side brackets, and bed the whole assembly down.
Step 5
Leave the adhesive to cure fully before driving.
Questions
Frequently Asked Questions
What exactly is in the box?
One set of four white corner brackets and one set of short white side brackets.
Is adhesive included?
No. An ABS adhesive sealant is required and is not part of the kit, so you can match it to your roof material.
Which kit should I choose?
This one for a panel that needs short side support. If your module needs a 530 mm long side bracket, choose BS090018-Kits, BS090033-Kits or BS090034-Kits according to the length required.
Can the kit be removed later?
It is a bonded installation, so removal means cutting the adhesive bond — but it leaves no fastener holes in the roof.
Further reading
Notes and Guides for This Product

Two Panels on a Caravan Roof Without Drilling
A caravan owner planned to DIY-install two 80 watt polycrystalline panels on the roof of a 21 ft 6 in van. The question raised on…

Waterproof Roof Cable Entry on a Camper
When the cable assembly of solar panels on the roof of a camper is run, the practical route is to bring the cable through the…

Sizing a Solar Panel for an RV
Count the loads first, then pick the module — not the other way round.

No Drill Adhesive Mounting for Caravan Roofs
The reasoning behind the ABS range, and what changed when white was added.

ABS Plastic Versus Aluminium Solar Mounts
Two mounting families, one decision: can this surface take a fastener or not?
Ready to Order BS09009-Kits
Tell us how many BS09009-Kits you need and which port they are going to. We will confirm the pack quantity for the Caravan RV Solar Mount Kit with Short Side Brackets, quote freight and give you a lead time.


