Stainless Steel Hemispheres and Half Balls
Pressed stainless steel hemispheres for wall, floor and edge details, where a full sphere would waste half its form against a surface.
All 1 Products in Stainless Steel Half Spheres
Who This Category Is For
Half spheres are usually part of a run rather than a single object, so consistency matters more than any one piece.
- Landscape contractors setting domed details into walls paving and planters
- Architectural metalwork shops needing pressed domes rather than fabricated ones
- Interior fit out contractors specifying wall mounted dome features
- Public realm projects using graded dome runs along a wall or a bench
- A full sphere against a wall hides half the piece and doubles the cost
- Hemispheres cut from a sphere leave an untidy rim that shows on close inspection
- Fixings drilled after finishing scratch the polished face
- Graded runs bought piecemeal arrive with visibly different polish
- Thin hemispheres deform under handling on site
What You Get With This Range
- Pressed rather than cut, so the rim is formed and even all the way round
- Wall thickness from 1 mm to 6 mm chosen for how the dome will be handled
- Back fixing studs and plates welded on before polishing
- Whole graded runs polished or coated in one batch
- Mirror brushed matt and colour finishes all available
- AISI 316 available for coastal walls and pool surrounds
Where These Pieces Are Installed
Domed details set into garden and courtyard walls
Graded dome runs along a bench a planter or a retaining wall
Wall mounted feature groups in lobbies and reception areas
Paving inserts and edge details in hard landscaping
Bases and caps on larger sculptural assemblies
Related Industry Pages
Stainless Steel Half Spheres Buying Questions
What diameters can you press?
The same tooling range as our spheres, from small dome details up to large architectural domes. Give the diameter you need and we will confirm it against the press.
How are hemispheres fixed?
Studs, plates or spigots are welded to the back before final polishing, so nothing has to be drilled through the visible face on site.
Can I order a graded set?
Yes, and it is worth ordering the whole run at once so every dome is polished or coated in the same batch.
Which grade for an outdoor wall?
304 inland, 316 near the coast, beside pools or where roads are salted in winter.
How long does an order take?
15 to 30 days after the deposit is received, at the longer end for large graded runs with a colour finish.
Need a Quote on Stainless Steel Half Spheres
Send the diameters, the wall or paving detail and the finish, and we will quote the run with the fixings welded on.