Yellow pendant control station with red emergency stop, green ON and arrow buttons, plus a black rubber boot

Wired Pendant Control Station

Name: Wired Pendant Control Station
Brand: Acontrol Remote

Product Overview

What The Wired Pendant Control Station Is For

The AR1-61YD is a wired pendant control station with two double speed functions, an on/off switch and an emergency stop, designed for overhead cranes, hoists and mobile lifting equipment. It uses robust mechanical switches with a push-button start and combination button text, allowing one-hand operation. The unit is built with a yellow ABS plastic housing rated IP54, making it suitable for dusty or wet shop environments. It is supplied as a single unit with a 1.5 m cable and is ready to connect directly to a control panel.

Key Benefits

What You Get From This Unit

One-hand operation allows the operator to control the machine without needing to hold a pendant cable
Double speed control on two functions enables fast travel and slow approach without extra hardware
IP54 rated housing resists dust and splashing water, suitable for shop floor and outdoor use
Mechanical interlock prevents accidental simultaneous operation of conflicting functions
10A contacts at 500VAC handle high-duty control circuits directly without needing an intermediate relay

Application Scenarios

Where This Model Is Used

Overhead cranes with single or double girder configurations where the operator needs to move freely
Hoists and winches in construction or maintenance areas with frequent start-stop cycles
Electric carts and mobile lifting platforms requiring reliable, hand-held control
Outdoor gantries or workshops with airborne dust and occasional water exposure
Retrofit of an existing machine that uses a pendant control but needs a replacement unit

Who It Is For

Buyers This Model Suits

Crane and hoist OEMs integrating a control station into a new machine build
Maintenance teams replacing a worn or damaged pendant control station
Equipment dealers stocking a durable, low-maintenance control unit for multiple machine types
Traders sourcing a wired pendant control with low MOQ and fast delivery from China

Problems It Solves

What Goes Wrong Without It

Operator must hold a heavy pendant cable while controlling the machine, leading to fatigue
Existing pendant has worn buttons or loose connections that cause intermittent operation
Control station fails in dusty or wet environments due to poor sealing
Two functions can be activated at once on a poorly designed pendant, risking equipment damage
No spare control station available when the original fails, causing machine downtime

Technical Features

How The Unit Is Built

2 double speed function buttons with push-button start
1 on/off switch and 1 emergency stop button
Combination button text: arrow tips plus English labels
Mechanical interlock for safety between conflicting motions
IP54 protection rating against dust and water splashes
Working temperature range from -45 C to +55 C
Contact rated 10A at 500VAC for direct control of contactor coils
1.5 m cable with standard industrial connector for panel wiring
Yellow ABS plastic housing with high impact resistance
Single hand operation with ergonomic button layout

Specifications

Data From The Original Product Sheet

Model	AR1-61YD
Button Number	2 double speed + on + emergency stop
Speed	Double
Button Type	Combination: arrow tip + English text
Contact Rated Current	10 A
Working Voltage	500 V
IP Rating	IP54
Working Temperature	-45 C to +55 C
Housing Material	Sturdy ABS plastic
Housing Color	Yellow
Warranty	12 months
Start Type	Push Button
Mounting	Pendant style, hand-held
Connection Type	Standard industrial connector

Materials

What The Housing And Contacts Are Made Of

Sturdy ABS plastic housing for impact resistance in industrial environments
Mechanical switches with 10A contacts rated at 500VAC for reliable switching
Yellow color for high visibility and consistent branding

Manufacturing Process

How This Unit Is Made

Step 1

Mechanical switches are assembled by hand on a dedicated production line

Step 2

Button labels are printed with arrow tips and English text before final assembly

Step 3

Each unit is tested for correct function and interlock before packaging

Step 4

Cable is soldered and strain-relieved at the connector end to prevent wire pull

Quality Control

What Is Checked Before It Ships

Raw materials inspected before use in production
Each unit is function tested for correct button response and interlock
Visual inspection for housing cracks, label alignment and cable integrity
12 month warranty from delivery, with full replacement for defects

Customization Options

What Can Be Changed On Your Order

Button text can be customized with your own English labels or brand name
Button color options include black, green, and emergency stop red
Button count from 2 to 8 available in single or double speed configurations
OEM orders accept custom branding and packaging

Comparison

How It Compares With The Alternatives

Radio remote control	A wired pendant eliminates battery replacement and frequency pairing but adds a trailing cable that can snag on structures
F24-6D radio remote	The pendant offers mechanical reliability and no power source, but lacks wireless mobility and remote operation
XAC series pendant	The AR1-61YD has double speed control on two functions; the XAC series may have more buttons but lacks the same mechanical interlock

Use Guide

Getting It Onto The Machine

Confirm the control voltage and contactor type on the machine panel before installation
Check that the button layout matches the machine’s motion sequence
Connect the pendant cable to the control panel using the standard industrial connector
Test each button and emergency stop to ensure correct function and interlock
Label the pendant with the machine name or ID so it is not used on the wrong equipment