Pendant Control System
The XAC-A4713 is a single speed pendant control station for overhead cranes, hoists and winches, designed with a compact, ergonomic form and four function buttons. It features a rotary start button, mechanical interlock for safety
What The Pendant Control System Is For
The XAC-A4713 is a single speed pendant control station for overhead cranes, hoists and winches, designed with a compact, ergonomic form and four function buttons. It features a rotary start button, mechanical interlock for safety, and is built with rugged ABS plastic to withstand shop floor conditions. The unit operates at 500VAC and has contacts rated for 10A, allowing direct control of contactor coils without additional relays. It is available in yellow housing with black and white buttons, including an emergency stop, and is IP54 rated for dust and splash protection.
What You Get From This Unit
- Compact and ergonomic design allows one-hand operation in tight spaces
- Rugged ABS plastic housing resists impact and lasts longer in industrial environments
- Contacts rated 10A at 500VAC switch contactor coils directly without extra relays
- IP54 rating protects against dust and water splashes in wet or dusty workshops
- Single speed control simplifies operation for basic lifting and moving tasks
Where This Model Is Used
- Electric hoists and winches where a trailing pendant cable is acceptable but a compact control is needed
- Mobile lifting equipment and tiller systems requiring reliable, one-handed operation
- Workstations with limited space where a large control station would obstruct movement
- Retrofit of existing crane systems where a simple, low-cost pendant is preferred over radio control
Buyers This Model Suits
- Crane and hoist OEMs integrating a basic pendant into new machine builds
- Maintenance teams replacing a worn or damaged pendant control station
- Equipment dealers stocking a low-cost, reliable pendant for common crane models
- Traders sourcing a pendant control with low MOQ and fast delivery from China
- Operators needing a simple, safe control that can be used with one hand
What Goes Wrong Without It
- Existing pendant cable is too long and gets caught on structures or equipment
- Operator must use two hands to operate the control, increasing fatigue and risk
- Control housing cracks or breaks under impact from dropped tools or equipment
- Contactors fail due to low-rated contacts in the control station
- Dust and moisture enter the control unit in outdoor or wash-down areas
How The Unit Is Built
- Four function buttons: one off, three on, with emergency stop
- Rotary start button for safe power-up sequence
- Mechanical interlock prevents conflicting button presses
- Normally open contact type for standard control circuit use
- Contact rated 10A at 500VAC for direct switching of contactor coils
- IP54 rated enclosure resists dust and water splashes
- Single hand operation with ergonomic grip and compact size
- Button text in arrow tips standard, with custom text available on OEM orders
Data From The Original Product Sheet
| Model | XAC-A4713 |
|---|---|
| Housing Material | Sturdy ABS plastic |
| Button Count | 4 |
| Speed | Single |
| Contact Type | Normally open |
| Button Color | Black, white, emergency stop |
| Contact Rated Current | 10 A |
| Working Voltage | 500 V |
| IP Rating | IP54 |
| Working Temperature | -45 C to +55 C |
| Housing Color | Yellow |
| Start Type | Rotary |
| Button Type | Combination |
| Button Text | Arrow tip standard |
| Warranty | 12 months |
What The Housing And Contacts Are Made Of
- Sturdy ABS plastic housing for impact resistance and long-term durability
- High-quality contacts rated 10A at 500VAC for reliable switching of contactor coils
- Mechanical interlock mechanism to prevent simultaneous activation of conflicting functions
How This Unit Is Made
Step 1
Housing is injection molded from high-impact ABS plastic
Step 2
Buttons and contacts are assembled with mechanical interlock built in
Step 3
Wiring is connected and tested for continuity and correct function
Step 4
Each unit is checked for correct button operation and contact rating before packing
Step 5
Final inspection includes visual check for defects and correct button labeling
What Is Checked Before It Ships
- Raw materials inspected upon arrival
- In-process checks at each assembly stage
- Final function test on every unit before packaging
- Production follows ISO9001:2008 standards
What Can Be Changed On Your Order
- Button text can be customized with your own labels or brand name on OEM orders
- Button count available from 2 to 12, single or double speed depending on model
- Housing color can be changed to match your branding or application
- Emergency stop button can be repositioned or replaced with a different function if needed
- Custom wiring diagrams accepted for special machine configurations
How It Compares With The Alternatives
| Radio remote control | Pendant is simpler, cheaper, and needs no battery replacement; radio adds mobility but requires pairing and receiver installation |
|---|---|
| F24 series radio remote | Pendant is more direct and reliable for single speed tasks; radio allows operation from a distance but adds complexity |
| XAC-A4713 with 6 buttons | The 4-button version is more compact and lower cost; if more motions are needed, the 6-button model offers more functions |
Getting It Onto The Machine
- Confirm the control voltage and contactor rating on the crane panel before ordering
- Use the rotary start button to power up the control safely
- Ensure mechanical interlock prevents conflicting button presses during operation
- Check the button labels and ensure they match the machine’s motion sequence
- Record the model number and button layout for future replacement or spare ordering
Other Models In This Series
Industries Cases And Guides For This Model
Overhead and Bridge Cranes
Industry application
Electric Hoists and Winches
Industry application
Agriculture and Garden Machinery
Industry application
F21-2S Up and Down Remote Control For Chain Hoists
Case study
Factory Visit And Six Month Field Test Before A Pakistan Order
Case study
Pendant Control Or Radio Remote Control For Your Crane
Technical guide
What Does IP65 Mean On A Crane Remote Control
Technical guide
How To Replace A Broken Or Lost Remote Control
Technical guide
OEM And Private Label Control Units
Solution
Retrofit A Pendant Crane To Radio Control
Solution
Catalogue And Datasheets
Download center
Frequently Asked Questions
What is the minimum order quantity?
One piece. A single sample is available for testing before placing a larger order.
How long is delivery?
Samples arrive in 3-4 days; small volume orders take about 7 days to ship.
Can I get a replacement button or part?
Yes. Send the model number and description of the part needed, and we will supply it.
Can the button text be customized?
Yes. Arrow tips are standard; your own English labels or brand name can be printed on OEM orders.
Is the pendant waterproof?
It is IP54 rated, which protects against dust and water splashes but not full immersion.
Can I order a pendant with more than 4 buttons?
Yes. Button count ranges from 2 to 12, single or double speed, depending on the model.
How is it packed?
One unit per box, 20 units per carton. Each box measures 24 x 18 x 10 cm.
Quote The Pendant Control System
Send the control voltage on your panel and the motion list. A price, a lead time and the matching receiver build come back the same working day.