Embossed Logo Zipper Puller
A zinc alloy puller with the logo embossed into the casting, so the mark stands proud of the body instead of being cut into it. Embossing survives plating better than fine etched line work, which is the usual reason a brand logo disappears on a puller. Minimum 500 pieces per colour, 7 to 15 days production.
Embossed rather than etched, for logos with fine detail that etching would lose under plating.
| Size | As samples or custom |
|---|---|
| Material | Zinc alloy |
| Finishes | Rainbow/Gold/Rose Gold/Nickel/Gunmetal/Antique Brass |
| Typical Use | Bag/purse/backpack/wallet/handbag |
| Minimum Order | 500 pcs/color |
| Production Time | 7 to 15 days |
Problems It Solves
- A stock puller makes an otherwise custom bag look like a private label job
- Etched logos that are too fine fill with plating and disappear
- Pullers that are heavy for their size swing and tap against the bag panel
Key Benefits
- Embossed or etched logo cast into the body rather than printed on it
- Shape developed from your sample, photo or drawing, with free 3D design help
- Balanced weight so the puller hangs straight without knocking the panel
Application Scenarios
- Main zip pullers on handbags, backpacks and wallets
- Inner pocket pullers in a contrasting finish
- Luggage and travel case zips
- Branded gift and accessory zips
Who It Is For
- Brands that want their mark on the zip rather than on a hang tag
- Bag factories developing a house puller across a collection
- Wallet and small leather goods makers needing a small light puller
How This Part Is Produced
Six steps inside one factory, from the mould to the packed carton.
Technical Features
- Die cast zinc alloy, finished by polishing and plating
- Logo embossed, etched or enamel filled
- Size and shape made to sample, since no two brand pullers are alike
Quality Control
- Incoming zinc, brass, iron and stainless material checked against the grade ordered
- First article from each mould compared with the approved sample before the run starts
- Dimensional check on inner width and thickness during casting and stamping
- Plating thickness and colour compared against the approved colour plate
- Spring and swivel action tested by hand on hooks, snaps and side release buckles
- Counted, bagged and cartoned with the order's own packing list
Customisation Options
- Size or inner width changed on an existing catalogue style with no mould fee
- Finish chosen from nickel, gunmetal, black nickel, gold, light gold, rose gold, antique brass and rainbow
- Logo etched or embossed where the part has a flat large enough to carry it
- Painted or enamel colour where a plated metal tone will not match the brand colour
- Free 3D design from a photo or a physical sample if you have no drawing
The factory states that this item is produced as an eco-friendly part to ISO 9001, SGS and RoHS requirements. We do not hold a certificate scan for this specific SKU on the website, so ask for the current certificates by email or WhatsApp before you place a compliance-critical order.
Photographs of This Item
Every image is a photograph of the part itself, taken from the manufacturer's own product record rather than a rendering.
Use Guide
- Send vector artwork, since a photo of a logo cannot be cut into a mould cleanly
- Keep line widths above about 0.3 mm so plating does not fill the detail
- Check the cord or ring hole size against the zip slider you buy
| Compared with | What changes |
|---|---|
| Stock catalogue puller | A stock puller is cheaper and available immediately but carries no brand mark |
| Injection moulded plastic puller | Plastic is lighter and takes bright colour, but has no metal weight or plated finish |
| Leather pull tab | A leather tab is soft and quiet but wears and stretches, while a metal puller keeps its shape |
Related Reading
Industries
Solutions
Questions About This Item
Sizing, finish, minimum order and lead time on this part.
Do I Pay a Mould Fee for a Custom Puller
Customising a catalogue style needs no new mould and no mould fee. A completely new shape needs tooling, which takes about 7 days, and our team can draw the 3D model free if you have no file.
What Is the Minimum Order for a Custom Puller
Custom pullers start at 500 pieces per colour, and production runs 7 to 15 days after the sample is approved.
Ask for a Sample of the Embossed Logo Zipper Puller
Stock samples are free and you pay only the courier. Sampling time is 1 to 3 days, and we will confirm the MOQ and the plated finish in writing before production.