3/4 Inch Shiny Nickel Swivel Bag Hook
A 19 mm inner width swivel hook in zinc alloy finished in shiny nickel, from a ladder that also runs 10 mm, 15 mm, 20 mm, 25 mm, 30 mm and 38 mm. Shiny nickel shows polishing faults more than any other finish, so this hook is polished before plating rather than after. Minimum 1,000 pieces.
The shiny nickel benchmark piece, and the one to sample if you want to judge our polishing.
| Size | 10 mm/15 mm/20 mm/25 mm/30 mm/38 mm, custom sizes available |
|---|---|
| Material | Zinc alloy |
| Finishes | Rainbow/Gold/Rose Gold/Nickel/Gunmetal/Antique Brass and others |
| Typical Use | Dog Collar, Purse, Wallet, Bag, Backpack, Belt, and others |
| Minimum Order | 1000 pcs |
| Sampling Time | 1 to 3 days |
Problems It Solves
- A strap that will not swivel puts all the load on one edge of the webbing and tears it at the fold
- Trigger springs that lose tension after a few hundred cycles make a finished bag feel cheap on the shelf
- Hook throat width that does not match the ring it clips to leaves the strap rattling or jamming
Key Benefits
- The barrel swivel turns freely under load, so the strap lies flat wherever the bag is carried
- Spring tension is tested by hand on every batch before the goods are counted
- Throat and inner width are cast to the size on the drawing, so the hook pairs with your own D ring or rectangle ring
Application Scenarios
- Detachable shoulder straps on handbags and crossbody bags
- Backpack chest and sternum strap ends
- Key fobs, lanyards and badge holders
- Dog leash ends where a swivel stops the lead twisting
Who It Is For
- Handbag and crossbody bag factories buying strap hardware by the size range
- Leather workshops that need one hook in several plated colours for a seasonal line
- Lanyard and promotional gift suppliers who need a logo on the hook body
How This Part Is Produced
Six steps inside one factory, from the mould to the packed carton.
Technical Features
- Cast body with a riveted swivel post and a sprung trigger gate
- Plated after polishing so the gate and the body match in colour
- Available with an etched or embossed logo on the flat of the hook
Quality Control
- Incoming zinc, brass, iron and stainless material checked against the grade ordered
- First article from each mould compared with the approved sample before the run starts
- Dimensional check on inner width and thickness during casting and stamping
- Plating thickness and colour compared against the approved colour plate
- Spring and swivel action tested by hand on hooks, snaps and side release buckles
- Counted, bagged and cartoned with the order's own packing list
Customisation Options
- Size or inner width changed on an existing catalogue style with no mould fee
- Finish chosen from nickel, gunmetal, black nickel, gold, light gold, rose gold, antique brass and rainbow
- Logo etched or embossed where the part has a flat large enough to carry it
- Painted or enamel colour where a plated metal tone will not match the brand colour
- Free 3D design from a photo or a physical sample if you have no drawing
The factory states that this item is produced as an eco-friendly part to ISO 9001, SGS and RoHS requirements. We do not hold a certificate scan for this specific SKU on the website, so ask for the current certificates by email or WhatsApp before you place a compliance-critical order.
Photographs of This Item
Every image is a photograph of the part itself, taken from the manufacturer's own product record rather than a rendering.
Use Guide
- Match the hook inner width to the webbing width, not to the ring outer size
- Clip and unclip a sample 50 times before approving the spring tension
- For leather straps, check that the swivel post clears the stitch line
| Compared with | What changes |
|---|---|
| Welded fixed hook | A welded hook is cheaper but cannot swivel, so the strap twists and wears at the fold |
| Plastic snap hook | Plastic saves weight but flexes under a loaded bag and cannot carry a plated brand colour |
| Stainless steel hook | Stainless resists corrosion better but costs more and offers a far narrower colour range |
Related Reading
Industries
Solutions
Other Items in Snap Hooks
Dog Hooks
9 mm Painted Snap Hook for Keychains and Small Straps
View details
Snap Hooks
25 mm Swivel Trigger Snap Hook for Handbags and Backpacks
View details
Snap Hooks
38 mm Zinc Alloy Snap Hook for Bags and Key Fobs
View details
Dog Hooks
Swivel Metal Clasp for Handbags Leads and Lanyards
View details
Questions About This Item
Sizing, finish, minimum order and lead time on this part.
Can You Match the Hook to a Ring I Already Buy Elsewhere
Yes. Send the ring or a photo with the inner width and we cast the hook throat to suit it.
Will the Spring Stay Tight After Plating
Plating is done before the gate is assembled, so the spring is not annealed by the process and keeps its tension.
Ask for a Sample of the 3/4 Inch Shiny Nickel Swivel Bag Hook
Stock samples are free and you pay only the courier. Sampling time is 1 to 3 days, and we will confirm the MOQ and the plated finish in writing before production.