Hex Nut
Hex Nut is the mating nut for the hex bolts and threaded rod in this range. Buying the nut, bolt and washer as one line item avoids the mismatched-thread problem that shows up when three suppliers are involved. It is one of the fasteners and bolts lines Winton exports from Guangdong, China.
Key Benefits
- Matched to the hex bolts and threaded rod in this range
- Removes the cross-supplier thread mismatch problem
- Zinc plated finish specified per item
- Ordered on the same line as the fasteners it mates with
Where It Is Used
- Bolted joints with the matching hex bolts
- Threaded rod hangers and adjustable supports
- General assembly and maintenance kits
- Site stock held with washers and bolts
Who It Is For
- Building material importers and wholesalers
- Anchor and fixing distributors serving contractors
- MEP and drywall contractors buying direct
- Hardware chains building a private-label fixing range
What It Fixes
- Mixed-brand anchors on one site give inconsistent pull-out behaviour and slow down inspection sign-off
- Importers carrying anchors, bolts, nuts, washers and threaded rod from four different suppliers pay four sets of freight and four minimum orders
- DIN washer sizes run out faster than the bolts they pair with, so partial kits sit in the warehouse
- Zinc finish varies between shipments and the customer sees it as a quality problem even when the steel is fine
Published Catalogue Data
The factory published this item without dimensional data. Send the size, finish and quantity you need and we will confirm it against the production drawing before you order.
How It Is Made
- Cold heading the blank from steel wire
- Thread rolling to the stated standard
- Heat treatment where the item requires it
- Zinc electroplating and passivation
- Counting, cartoning and carton marking
Quality Control
- Incoming material checked against the item specification before production
- Finish and plating colour checked batch to batch so repeat orders match
- Dimensional check on the stated sizes before packing
- Cartons counted and marked to the packing list before container loading
Against The Alternatives
| A plastic plug and screw | A mechanical anchor carries far higher load in concrete and does not rely on the plug material staying dimensionally stable. |
|---|---|
| Chemical resin anchors | Resin gives higher performance in cracked concrete but needs mixing, curing time and a shelf life. A mechanical anchor is loaded immediately. |
| Mixing anchor brands on one site | A single-source anchor programme gives consistent behaviour at inspection instead of a different clip design in every box. |
Getting It Right On Site
- Drill the hole to the diameter and depth stated for the anchor size
- Blow or brush the dust out of the hole before setting
- Set or tighten to the manufacturer's torque, not to feel
- Check edge distance and spacing against the concrete section
- Do not reuse an anchor that has been loaded and removed
Customisation Options
- Packaging, carton marking and labelling to your requirement
- Private label and colour box packing on agreed quantities
- Quantity per carton adjusted to suit your handling and shelf layout
- Mixed item loading so several product lines share one container
Others In The Fasteners Range
Thread Rod
View Details
Spring Washer DIN127
View Details
Flat Washer DIN9021
View Details
Flat Washer DIN125
View DetailsIndustries Using This Item
Guides Worth Reading First
Hex Nut FAQ
Can I order Hex Nut together with other items in the Fasteners and Bolts range
Yes. Hex Nut is a catalogue stock line, and consolidating it with the rest of your order into one container is the normal way our customers buy it.
Which technical details can you confirm for Hex Nut
The source catalogue does not publish dimensions for this item. Send us the size, finish and quantity you need and we will confirm what the factory can supply before you place the order.
What finishes are available on your anchors and bolts
Zinc plating is the standard finish. Threaded rod is listed in white zinc and blue zinc. For other finishes tell us the item and quantity and we will confirm what the factory can run.
Can you supply anchors bolts nuts and washers on one order
Yes. Consolidating the whole fixing range on one order is the main reason importers buy this category from us, and it keeps freight and paperwork to one shipment.
How is delivery time confirmed
Order volume changes the schedule, so we ask every buyer to confirm price and delivery time with us before the order is placed.
Request A Quote On Hex Nut
Give us the quantity and your delivery port. This item can be consolidated with anything else in the Winton catalogue into one container.