Guides For The Decisions That Come Before The Order
Six guides on the choices that decide whether hardware works once it is installed: thread pitch, cabinet width, coil substrate, LED type, anchor selection and wardrobe specification.
How to Choose Drywall Screws Coarse or Fine Thread
The single most common fixing mistake on an interior fit-out is the wrong thread pitch. Here is how to tell them apart and how to order them so they never get mixed.
Read The Guide
Sizing Kitchen Pull-Out Baskets by Cabinet Width
Baskets are ordered by the cabinet, not by the basket. This guide walks through the widths each Winton kitchen unit is listed against and how to pick between base tall wall and corner families.
Read The Guide
PPGI and PPGL What the Difference Means on a Roof
Two acronyms, two different metallic coatings, and one of them is routinely sold as the other. A short guide to the substrate under the paint.
Read The Guide
Choosing LED Strip COB SMD Neon or Driver-Free
Five strip types, one decision, and it is usually made by the depth of the diffuser rather than by the specification sheet.
Read The Guide
Anchor Selection for Concrete and Masonry
Wedge, sleeve, drop-in, ceiling and frame anchors all fix into concrete. They are not interchangeable, and the difference is mostly about what happens after installation.
Read The Guide
Specifying Wardrobe Interiors That Match
A fitted wardrobe is sold as one product and usually sourced as four. Here is how to specify the interior so every component comes out of the same colour family.
Read The GuideAbout These Guides
Who are these guides written for
Buyers and specifiers who have to make a technical decision before they can place an order: thread pitch, cabinet width, coil substrate, LED diffuser depth or anchor type.
Do the guides only cover Winton products
The engineering explanation is general and applies whoever you buy from. Where a Winton item illustrates the point, the catalogue value is quoted and the item is linked.
Can you advise on a specific project
Yes. Email the sales director with the application and the quantities and you will get an answer from someone who handles the orders rather than a generic reply.
Still Not Sure Which Item You Need
Describe the application and the quantity. The sales director will answer with what the factory can actually supply.