Flat Washer DIN125
Flat Washer DIN125 spreads the clamping load of a bolt or nut over a wider bearing area, which matters on soft substrates, slotted holes and painted steel. It is held as a catalogue item so it can be reordered against the same reference as the bolts it pairs with. Catalogue data: standard DIN 125.
Key Benefits
- Spreads clamp load and protects the surface under the nut
- DIN referenced so it cross-checks against existing stock codes
- Available with the matching bolts, nuts and spring washers
- Zinc plated finish quoted per item so repeat shipments match
Where It Is Used
- Bolting through slotted or oversized holes
- Fixing into softer substrates that would otherwise crush
- Protecting painted and coated surfaces under the nut
- General assembly kits held with matching bolts
Who It Is For
- Building material importers and wholesalers
- Anchor and fixing distributors serving contractors
- MEP and drywall contractors buying direct
- Hardware chains building a private-label fixing range
What It Fixes
- Mixed-brand anchors on one site give inconsistent pull-out behaviour and slow down inspection sign-off
- Importers carrying anchors, bolts, nuts, washers and threaded rod from four different suppliers pay four sets of freight and four minimum orders
- DIN washer sizes run out faster than the bolts they pair with, so partial kits sit in the warehouse
- Zinc finish varies between shipments and the customer sees it as a quality problem even when the steel is fine
Published Catalogue Data
| Standard | DIN 125 |
|---|
Every value above is published by the factory for this item. Anything not listed was not published, so ask rather than assume.
How It Is Made
- Cold heading the blank from steel wire
- Thread rolling to the stated standard
- Heat treatment where the item requires it
- Zinc electroplating and passivation
- Counting, cartoning and carton marking
Quality Control
- Incoming material checked against the item specification before production
- Finish and plating colour checked batch to batch so repeat orders match
- Dimensional check on the stated sizes before packing
- Cartons counted and marked to the packing list before container loading
Against The Alternatives
| A plastic plug and screw | A mechanical anchor carries far higher load in concrete and does not rely on the plug material staying dimensionally stable. |
|---|---|
| Chemical resin anchors | Resin gives higher performance in cracked concrete but needs mixing, curing time and a shelf life. A mechanical anchor is loaded immediately. |
| Mixing anchor brands on one site | A single-source anchor programme gives consistent behaviour at inspection instead of a different clip design in every box. |
Getting It Right On Site
- Drill the hole to the diameter and depth stated for the anchor size
- Blow or brush the dust out of the hole before setting
- Set or tighten to the manufacturer's torque, not to feel
- Check edge distance and spacing against the concrete section
- Do not reuse an anchor that has been loaded and removed
Customisation Options
- Packaging, carton marking and labelling to your requirement
- Private label and colour box packing on agreed quantities
- Quantity per carton adjusted to suit your handling and shelf layout
- Mixed item loading so several product lines share one container
Others In The Fasteners Range
Drop-In Anchor
View Details
Hook Bolt Sleeve Anchor
View Details
Ceiling Anchor
View Details
Eye Bolt Sleeve Anchor
View DetailsIndustries Using This Item
Guides Worth Reading First
Flat Washer DIN125 FAQ
Can I order Flat Washer DIN125 together with other items in the Fasteners and Bolts range
Yes. Flat Washer DIN125 is a catalogue stock line, and consolidating it with the rest of your order into one container is the normal way our customers buy it.
What is confirmed on the specification for Flat Washer DIN125
The published catalogue data gives standard DIN 125. Anything not listed here was not published by the factory, so ask us and we will confirm it against the production drawing rather than guess.
What finishes are available on your anchors and bolts
Zinc plating is the standard finish. Threaded rod is listed in white zinc and blue zinc. For other finishes tell us the item and quantity and we will confirm what the factory can run.
Can you supply anchors bolts nuts and washers on one order
Yes. Consolidating the whole fixing range on one order is the main reason importers buy this category from us, and it keeps freight and paperwork to one shipment.
How is delivery time confirmed
Order volume changes the schedule, so we ask every buyer to confirm price and delivery time with us before the order is placed.
Request A Quote On Flat Washer DIN125
Give us the quantity and your delivery port. This item can be consolidated with anything else in the Winton catalogue into one container.