BM60040
Manufactured by Wanhao Industry in Zhangzhou, China, for export programmes. Colour and size customisation are open where the specification table below says so.
What This Model Is
BM60040 sits in the bamboo products section of the Wanhao catalogue and is built to order for export programmes. Steel forming, coating and final assembly all happen at the same site, which is what keeps a repeat run matching the first one. It suits i who need the carton plan and the specification agreed before the price is signed.
Every model in the catalogue is quoted with its own carton drawing and loading plan. What the factory can confirm today is in the specification table below; what it cannot is marked TBC rather than filled in with a plausible number.
Key Benefits
A natural-material tier
An alternative to all-steel and all-MDF at a comparable price.
Combines with steel frames
Bamboo surfaces on a coated steel frame where strength matters.
Merchandises as a story
Natural-material ranges photograph well and sell as a collection.
What This Model Is Specified Against
The problems below are the ones that turn a bamboo products order into a customer-service case. Each one is a build decision on this model.
- Panels that warp after shipping to a humid marketMoisture content at packing is the control point; tell us the destination market so it can be set for the route.
- Surface finish that marks in the kitchenSurface treatment is specified per model against the intended use.
- Colour variation between bamboo batchesMaterial is booked per order so a repeat shipment matches the first.
Where It Gets Used
Living room accents
Natural surfaces against dark steel frames.
Bathroom storage
Shelving units in a humid room, where the finish is specified for it.
Kitchen and dining storage
Racks, trolleys and organisers.
Entryway storage
Bamboo shoe racks and benches.
Buyers Who Specify It
- Eco and lifestyle brands
- Retail buyers running natural-material ranges
- Importers supplying houseware wholesalers
- E-commerce sellers in home organisation
Construction
- Bamboo panel and slat construction
- Bamboo combined with powder-coated steel on selected models
- Shelving, racks, trolleys and household storage
- Surface treatment specified per model
- Flat-pack construction on most models
What We Can Confirm
| Model code | BM60040 |
|---|---|
| Product name | BM60040 |
| Category | Bamboo Products |
| Minimum order quantity | TBC — quoted per model |
| Frame material | Powder-coated steel; grade and gauge confirmed at quotation |
| Finished dimensions | TBC — confirmed on the specification sheet |
| Carton size and loading quantity | TBC — confirmed on the carton drawing |
| Net and gross weight | TBC — confirmed at quotation |
| Test reports and certificates | TBC — confirmed per destination market |
| Country of manufacture | China — Zhangzhou, Fujian |
TBC means the previous catalogue never published that value. It is confirmed in writing at quotation rather than estimated here.
What It Is Made Of
Wanhao works in powder-coated steel tube, cold-rolled steel sheet, MDF, melamine-faced board, tempered glass, bamboo, and upholstery fabric and PU. The exact build-up for this model is confirmed on the specification sheet at quotation — the old catalogue did not publish it, and guessing it here would not help you cost the product.
CustomisationWhat Can Be Changed
- Colour, where the specification table shows Color: Customized
- Size, where the specification table shows Size: Customized
- Carton artwork, barcodes and retail labels to your files
- Instruction sheet produced to your artwork and languages
- Buyer-specified variants developed against your drawing, with tooling stated in the quote
Where It Gets Checked
- Incoming steel, panel, glass and fabric checked against the model specification
- First piece off the line checked against the approved pre-production sample
- Frames checked flat and square before surface preparation
- Coating colour and coverage checked against the approved sample
- Hardware pack counted against the instruction sheet
- A unit assembled from the carton to confirm fit and instructions
- Carton, print and handling marks verified before sealing
- Pre-shipment inspection to the AQL agreed with the buyer
How This Model Is Produced
Material intake
Steel, panel, glass and fabric received against the model specification.
Cutting and forming
Tube and sheet cut, bent and pressed to the frame drawing.
Welding and assembly
Joints made where the drawing places them, then dressed.
Surface preparation
Parts prepared so the powder coating holds.
Powder coating
Coated on the line, colour matched to the approved sample.
Surface components
Panel, glass, bamboo or upholstered parts fitted and checked against the frame.
Packing
Packed to the signed carton drawing with the specified internal protection.
Inspection and loading
Sampled against the agreed AQL, then loaded to the agreed plan.
How It Compares
Against a domestic-market version
Product built for the domestic Chinese market is not packed for six weeks at sea. The packing on BM60040 is specified against the export route the order actually takes.
Against an all-panel version of the same product
A fully panel-built alternative is cheaper to tool and heavier to ship, and its failure point is the joint between two boards. BM60040 carries the load on a steel frame, which keeps the joint count down and the carton lighter.
Assembly and Care
- Check the carton for transit damage before opening it, and photograph anything visible.
- Sort the hardware pack into its numbered groups before you start.
- Follow the assembly order given — the sequence exists because some fixings become unreachable later.
- Use the anchor point where one is supplied, especially on taller units.
- Avoid dragging the assembled unit across a floor; lift it to move it.
Other Models in This Range
Bamboo Products
BM60001
View model
Bamboo Products
BM60002
View model
Bamboo Products
BM60043
View model
Bamboo Products
BM60042
View model Buyer programmes
Private-Label Home Brands — Your design, your carton, your brand on the label
Capabilities
Quality Control Programme — Checks placed where the failures actually happen
OEM and ODM Development — From a reference photo to an approved sample to a repeatable production run
Steel Frame Fabrication — Cutting bending welding and coating on one site
Related guides
MOQ Tooling and Sample Costs Explained
Why a 100-piece MOQ is not one number, and how to read a quote that has tooling hidden in the unit price.
Questions About This Model
Which markets has this type of product been exported to?
Wanhao's company record states exports to 120 countries, including the United States, Canada, the United Kingdom, Germany, France, Spain, Denmark, Italy, Poland, Australia, Japan and Korea.
Is BM60040 available for OEM or private-label orders?
Yes. This model can be produced with your carton artwork, labels and instruction sheet. Colour and size customisation are open on the models marked Customized in the specification table above.
Can bamboo products be used in a bathroom?
Some models are finished for humid use and some are not. Confirm per model before you list it for bathroom use.
Can you combine bamboo with a coloured steel frame?
Yes, this is a standard combination in the range and can be customised on the models that allow it.
Is the bamboo certified?
Certification status is confirmed per order at quotation. It is not published in the catalogue — ask the sales team what can be supplied for your market.
Quote BM60040
Send the quantity and the destination market. Price, MOQ, carton size, loading quantity and the customisation options come back in one reply.