BM60025
Manufactured by Wanhao Industry in Zhangzhou, China, for export programmes. Colour and size customisation are open where the specification table below says so.
What This Model Is
Wanhao builds BM60025 as a bamboo product for buyers sourcing a bamboo range from a single factory. Steel forming, coating and final assembly all happen at the same site, which is what keeps a repeat run matching the first one. It fits programmes run by r where consistency between shipments matters more than novelty.
Every model in the catalogue is quoted with its own carton drawing and loading plan. What the factory can confirm today is in the specification table below; what it cannot is marked TBC rather than filled in with a plausible number.
Key Benefits
A natural-material tier
An alternative to all-steel and all-MDF at a comparable price.
Combines with steel frames
Bamboo surfaces on a coated steel frame where strength matters.
Merchandises as a story
Natural-material ranges photograph well and sell as a collection.
What This Model Is Specified Against
BM60025 is specified against the failure points that actually generate claims in this category.
- Colour variation between bamboo batchesMaterial is booked per order so a repeat shipment matches the first.
- Panels that warp after shipping to a humid marketMoisture content at packing is the control point; tell us the destination market so it can be set for the route.
- Surface finish that marks in the kitchenSurface treatment is specified per model against the intended use.
Where It Gets Used
Living room accents
Natural surfaces against dark steel frames.
Bathroom storage
Shelving units in a humid room, where the finish is specified for it.
Kitchen and dining storage
Racks, trolleys and organisers.
Entryway storage
Bamboo shoe racks and benches.
Buyers Who Specify It
- Retail buyers running natural-material ranges
- Importers supplying houseware wholesalers
- E-commerce sellers in home organisation
- Eco and lifestyle brands
Construction
- Bamboo panel and slat construction
- Bamboo combined with powder-coated steel on selected models
- Shelving, racks, trolleys and household storage
- Surface treatment specified per model
- Flat-pack construction on most models
What We Can Confirm
| Model code | BM60025 |
|---|---|
| Product name | BM60025 |
| Category | Bamboo Products |
| Minimum order quantity | TBC — quoted per model |
| Frame material | Powder-coated steel; grade and gauge confirmed at quotation |
| Finished dimensions | TBC — confirmed on the specification sheet |
| Carton size and loading quantity | TBC — confirmed on the carton drawing |
| Net and gross weight | TBC — confirmed at quotation |
| Test reports and certificates | TBC — confirmed per destination market |
| Country of manufacture | China — Zhangzhou, Fujian |
TBC means the previous catalogue never published that value. It is confirmed in writing at quotation rather than estimated here.
What It Is Made Of
Wanhao works in powder-coated steel tube, cold-rolled steel sheet, MDF, melamine-faced board, tempered glass, bamboo, and upholstery fabric and PU. The exact build-up for this model is confirmed on the specification sheet at quotation — the old catalogue did not publish it, and guessing it here would not help you cost the product.
CustomisationWhat Can Be Changed
- Colour, where the specification table shows Color: Customized
- Size, where the specification table shows Size: Customized
- Carton artwork, barcodes and retail labels to your files
- Instruction sheet produced to your artwork and languages
- Buyer-specified variants developed against your drawing, with tooling stated in the quote
Where It Gets Checked
- Incoming steel, panel, glass and fabric checked against the model specification
- First piece off the line checked against the approved pre-production sample
- Frames checked flat and square before surface preparation
- Coating colour and coverage checked against the approved sample
- Hardware pack counted against the instruction sheet
- A unit assembled from the carton to confirm fit and instructions
- Carton, print and handling marks verified before sealing
- Pre-shipment inspection to the AQL agreed with the buyer
How This Model Is Produced
Material intake
Steel, panel, glass and fabric received against the model specification.
Cutting and forming
Tube and sheet cut, bent and pressed to the frame drawing.
Welding and assembly
Joints made where the drawing places them, then dressed.
Surface preparation
Parts prepared so the powder coating holds.
Powder coating
Coated on the line, colour matched to the approved sample.
Surface components
Panel, glass, bamboo or upholstered parts fitted and checked against the frame.
Packing
Packed to the signed carton drawing with the specified internal protection.
Inspection and loading
Sampled against the agreed AQL, then loaded to the agreed plan.
How It Compares
Against a domestic-market version
Product built for the domestic Chinese market is not packed for six weeks at sea. The packing on BM60025 is specified against the export route the order actually takes.
Against an all-panel version of the same product
A fully panel-built alternative is cheaper to tool and heavier to ship, and its failure point is the joint between two boards. BM60025 carries the load on a steel frame, which keeps the joint count down and the carton lighter.
Assembly and Care
- Work with two people for anything larger than a side table; a single-handed assembly is where finishes get marked.
- Identify the front and back panels before assembly — the finished face is not always obvious in flat pack.
- Do not over-tighten fixings into panel material; snug is stronger than forced.
- Position the unit before final tightening if it sits against a wall.
- Clean with a soft damp cloth and dry immediately; do not leave standing water on a panel edge.
Other Models in This Range
Bamboo Products
BM60001
View model
Bamboo Products
BM60002
View model
Bamboo Products
BM60043
View model
Bamboo Products
BM60042
View model Buyer programmes
Private-Label Home Brands — Your design, your carton, your brand on the label
Capabilities
Export Packing and Logistics — 120 countries of shipping history behind the packing drawing
Quality Control Programme — Checks placed where the failures actually happen
OEM and ODM Development — From a reference photo to an approved sample to a repeatable production run
Related guides
MOQ Tooling and Sample Costs Explained
Why a 100-piece MOQ is not one number, and how to read a quote that has tooling hidden in the unit price.
Questions About This Model
What is the lead time for BM60025?
Lead time is confirmed at quotation against the order quantity and the season. It is not published as a catalogue figure because it moves with the production schedule.
Can we get a sample of BM60025 before ordering?
Yes. Sample cost and sample lead time for this model are confirmed by the sales team. A pre-production sample is built on production tooling and becomes the reference for the order.
Will the colour match across a repeat order?
Material is booked per order to keep shipments consistent. Natural variation still exists in bamboo.
What is the MOQ on bamboo items?
Quoted per model. The published 100-piece MOQ applies to the newer catalogue models.
Can bamboo products be used in a bathroom?
Some models are finished for humid use and some are not. Confirm per model before you list it for bathroom use.
Quote BM60025
Send the quantity and the destination market. Price, MOQ, carton size, loading quantity and the customisation options come back in one reply.