BM60011
Manufactured by Wanhao Industry in Zhangzhou, China, for export programmes. Colour and size customisation are open where the specification table below says so.
What This Model Is
BM60011 is listed under bamboo products and is quoted per model for container programmes. Fabrication, coating and assembly are handled in house, and the finished unit is trial-assembled from the carton before the specification is frozen. It fits programmes run by e where consistency between shipments matters more than novelty.
Every model in the catalogue is quoted with its own carton drawing and loading plan. What the factory can confirm today is in the specification table below; what it cannot is marked TBC rather than filled in with a plausible number.
Key Benefits
Combines with steel frames
Bamboo surfaces on a coated steel frame where strength matters.
Merchandises as a story
Natural-material ranges photograph well and sell as a collection.
A natural-material tier
An alternative to all-steel and all-MDF at a comparable price.
What This Model Is Specified Against
A bamboo product fails in a small number of places. BM60011 is specified against those places.
- Surface finish that marks in the kitchenSurface treatment is specified per model against the intended use.
- Colour variation between bamboo batchesMaterial is booked per order so a repeat shipment matches the first.
- Panels that warp after shipping to a humid marketMoisture content at packing is the control point; tell us the destination market so it can be set for the route.
Where It Gets Used
Entryway storage
Bamboo shoe racks and benches.
Living room accents
Natural surfaces against dark steel frames.
Bathroom storage
Shelving units in a humid room, where the finish is specified for it.
Kitchen and dining storage
Racks, trolleys and organisers.
Buyers Who Specify It
- Retail buyers running natural-material ranges
- Importers supplying houseware wholesalers
- E-commerce sellers in home organisation
- Eco and lifestyle brands
Construction
- Bamboo panel and slat construction
- Bamboo combined with powder-coated steel on selected models
- Shelving, racks, trolleys and household storage
- Surface treatment specified per model
- Flat-pack construction on most models
What We Can Confirm
| Model code | BM60011 |
|---|---|
| Product name | BM60011 |
| Category | Bamboo Products |
| Minimum order quantity | TBC — quoted per model |
| Frame material | Powder-coated steel; grade and gauge confirmed at quotation |
| Finished dimensions | TBC — confirmed on the specification sheet |
| Carton size and loading quantity | TBC — confirmed on the carton drawing |
| Net and gross weight | TBC — confirmed at quotation |
| Test reports and certificates | TBC — confirmed per destination market |
| Country of manufacture | China — Zhangzhou, Fujian |
TBC means the previous catalogue never published that value. It is confirmed in writing at quotation rather than estimated here.
What It Is Made Of
Wanhao works in powder-coated steel tube, cold-rolled steel sheet, MDF, melamine-faced board, tempered glass, bamboo, and upholstery fabric and PU. The exact build-up for this model is confirmed on the specification sheet at quotation — the old catalogue did not publish it, and guessing it here would not help you cost the product.
CustomisationWhat Can Be Changed
- Colour, where the specification table shows Color: Customized
- Size, where the specification table shows Size: Customized
- Carton artwork, barcodes and retail labels to your files
- Instruction sheet produced to your artwork and languages
- Buyer-specified variants developed against your drawing, with tooling stated in the quote
Where It Gets Checked
- Incoming steel, panel, glass and fabric checked against the model specification
- First piece off the line checked against the approved pre-production sample
- Frames checked flat and square before surface preparation
- Coating colour and coverage checked against the approved sample
- Hardware pack counted against the instruction sheet
- A unit assembled from the carton to confirm fit and instructions
- Carton, print and handling marks verified before sealing
- Pre-shipment inspection to the AQL agreed with the buyer
How This Model Is Produced
Material intake
Steel, panel, glass and fabric received against the model specification.
Cutting and forming
Tube and sheet cut, bent and pressed to the frame drawing.
Welding and assembly
Joints made where the drawing places them, then dressed.
Surface preparation
Parts prepared so the powder coating holds.
Powder coating
Coated on the line, colour matched to the approved sample.
Surface components
Panel, glass, bamboo or upholstered parts fitted and checked against the frame.
Packing
Packed to the signed carton drawing with the specified internal protection.
Inspection and loading
Sampled against the agreed AQL, then loaded to the agreed plan.
How It Compares
Against a lower-gauge import
A thinner-gauge equivalent will look identical in a photograph and fail at the joint under the same load. The gauge on BM60011 is fixed per the drawing and held for the life of the order.
Against buying frame and surface from two suppliers
Splitting the frame and the surface across two factories means two QC standards and a fit problem nobody owns. BM60011 is fabricated and fitted in one plant.
Assembly and Care
- Keep the carton until the unit is fully assembled and checked.
- Lay the parts out in the order shown on the instruction sheet before picking up a tool.
- Fit all fixings loosely first, square the unit, then tighten.
- Level the unit on the floor it will actually stand on, not on the packing carton.
- Re-check the fixings after the first few weeks of use, as with any assembled furniture.
Other Models in This Range
Bamboo Products
BM60001
View model
Bamboo Products
BM60002
View model
Bamboo Products
BM60043
View model
Bamboo Products
BM60042
View model Buyer programmes
Private-Label Home Brands — Your design, your carton, your brand on the label
Capabilities
Flat-Pack Engineering — Fewer parts fewer steps fewer returns
Export Packing and Logistics — 120 countries of shipping history behind the packing drawing
Quality Control Programme — Checks placed where the failures actually happen
Related guides
MOQ Tooling and Sample Costs Explained
Why a 100-piece MOQ is not one number, and how to read a quote that has tooling hidden in the unit price.
Questions About This Model
Can you produce BM60011 in a different colour?
Colour customisation is available on this model where the specification table shows Color: Customized. Send a RAL reference or a physical sample and it is confirmed on a pre-production sample.
How is BM60011 packed for export?
Packing is fixed on a carton drawing agreed before production. Carton size, board grade, internal protection and the container loading plan are confirmed in writing for this model.
Is the bamboo certified?
Certification status is confirmed per order at quotation. It is not published in the catalogue — ask the sales team what can be supplied for your market.
Will the colour match across a repeat order?
Material is booked per order to keep shipments consistent. Natural variation still exists in bamboo.
What is the MOQ on bamboo items?
Quoted per model. The published 100-piece MOQ applies to the newer catalogue models.
Quote BM60011
Send the quantity and the destination market. Price, MOQ, carton size, loading quantity and the customisation options come back in one reply.