- Home
- All Products
- IBC Parts and Accessories
- IBC Spouts
- 2" S60x6 IBC Extension Spout
2" S60x6 IBC Extension Spout
Bring the IBC Outlet Forward and Down to the Container
What This Product Is
An HDPE extension spout with a 2 inch S60x6 buttress nut on the inlet and a 40mm outlet, supplied in red. It screws onto the S60x6 outlet of an IBC valve and carries the discharge clear of the pallet frame so liquid runs into the receiving container instead of down the cage.
Key Benefits
- The S60x6 buttress nut matches the common IBC valve thread, giving a leak-free joint
- A 40mm outlet gives a controlled stream that fits standard container necks
- It fits and removes by hand, so an IBC can be switched between duties in seconds
- HDPE handles the same broad liquid range as the IBC itself
What Goes Wrong Without It
- A bare IBC valve discharges close to the frame, so the stream catches the pallet on the way out
- Holding a hose against an open valve is a two-person job and still splashes
- Adapting an IBC outlet with generic fittings often leaves a joint that weeps
Application Scenarios
- Warehouses decanting from IBCs into drums and jerry cans
- Agricultural operators filling sprayer tanks from bulk containers
- Chemical distributors who repack IBC deliveries into smaller packs
Technical Data
| Material | HDPE |
|---|---|
| Inlet | S60x6 |
| Outlet | 40mm |
| Color | Red |
Figures above are taken from the product documentation. Anything not listed is confirmed at enquiry rather than estimated.
Features and Advantages
Features
- Fit for S60x6 thread IBC valve
- Easy to install and remove
- Extensive
- Cost-effective
Advantages
- Easy and quick connection and disconnection of IBC tanks, saving time and effort in the transfer of liquids
- Can easily install and remove
- Constructed from durable plastics, ensuring long-lasting performance
- Fit for most IBC containers with S60x6 thread valve
How to Specify and Use It
Confirm the IBC valve outlet is S60x6 before ordering
Close the IBC valve fully, then hand-tighten the spout onto the outlet thread
Position the receiving container under the 40mm outlet before opening the valve
Rinse the spout after use and store it with the IBC
Comparison With Other Products
This extension spout takes the flow further from the tank than a short drain spout does, which suits filling containers that stand on the floor. The S100x8 drain spout in the same range fits larger DN80 valve outlets instead and is intended for straight drainage rather than reach.
Customisation
Sizes, colours and materials can be adapted where the product allows it, and branding can be applied to closures and cap seals. Confirm the change you need when you send the enquiry.
Quality Control
United Packaging operates a professional quality control system under ISO 9001 certification, following quality management procedures intended to minimise the risk of defects.
Other Items in IBC Spouts
IBC Drain Spout with S100x8 Female Thread
A Straight Drain Path off a DN80 IBC Valve
View details
IBC Outlet Nozzle with S60x6 Buttress Thread Cap
A Short Nozzle That Turns an IBC Valve Into a Pouring Outlet
View details
3M Adblue IBC Nozzle Kit
Dispense AdBlue Three Metres From the Tote
View details
IBC Spout with Female 2" Buttress Thread
A Through Spout That Keeps the S60x6 Thread on Both Ends
View detailsQuestions About 2" S60x6 IBC Extension Spout
What thread does the inlet use?
2 inch S60x6 buttress.
What is the outlet size?
40mm.
What material is it made from?
HDPE.
What colour is it supplied in?
Red.
Will it fit my IBC?
It fits most IBC containers with an S60x6 thread valve.
Do I need tools to fit it?
No, it installs and removes by hand.
Get a Price on 2" S60x6 IBC Extension Spout
Send the quantity, the specification variant and your destination port. We will come back with pricing and lead time.