OEM and ODM rechargeable battery manufacturer in Shenzhen since 2008 [email protected]
Sunder Battery logoRechargeable cells and battery packs Request A Quote
Battery storage product photo

Battery storage

Battery storage 48V 200Ah LiFePO4 battery 10kWh system, dimension 485*190*650mm, for household storage with cycle life more than 5000 times.

  • Product: 48V 200Ah LiFePO4 battery 10kWh
  • Dimension: 485*190*650mm
  • Application: household storage system
Request A Quote Talk To An Engineer Request A Sample

Category: LiFePO4 Battery Packs

Product Overview

Battery Storage 48V Lithium Ion Battery 200Ah For Household Systems

Model: PW48200. Dimension: 485*190*650mm.

Key Benefits

Cycle Life

The LiFePO4 Battery Packs range is published at more than 2000 cycles with 80% capacity remaining at 100% DOD.

Stated Electrical Data

Nominal voltage 51.2V, typical capacity 200Ah. The complete parameter table is published below, not summarised.

Built-in Protection

Automatic protection for over-charge, over-discharge, over-current and over-temperature, with internal cell balancing.

Working Range

Operating temperature is published per state. Charge: 0~45℃; Discharge: -20~60℃; Storage: -10~45℃.

Built To Order

Capacity, arrangement, case, terminal, cable, connector and custom logo are all specified by the customer. Dimensions are made according to the device's request.

Application Scenarios

Application: household storage system

Who It Is For

  • Solar street light assemblers who buy a finished 12V or 24V pack
  • Energy storage integrators needing 48V modules with RS485 or CAN
  • Equipment builders replacing a sealed lead acid block of a fixed size

Problems It Solves

  • Packs that fit the electrical spec but not the box
  • Systems with no cell balancing, where one weak cell ends the pack
  • Lead acid weight in a product that has to be carried or pole mounted

Specifications

Battery Storage 48V Lithium Ion Battery 200Ah Data Sheet

Battery Storage 48V Lithium Ion Battery 200Ah Data Sheet
Nominal voltage51.2V
Nominal capacity200Ah
Charge voltage55~56V
Discharge cut-off voltage43.2~44.8V
Charge modeCC-CV
Charge current40A
Discharge current40A
Max. Charge current100A
Max. Discharge current100A
Peak discharge current300A (3s)
Cycles[email protected] 70%DOD
Operating temperatureCharge: 0~45℃; Discharge: -20~60℃; Storage: -10~45℃
WeightApprox 90KG
Communication portRS232 / RS485 / CAN
Humidity45%~85%
BMSBuilt-in BMS
DisplayLCD

Data sheet published by Sunder Battery for this model.

48V Lithium Ion Battery 200Ah Advantages

Power battery, long life, safety durable, over voltage protection, over-current protection, over-charge protection, over-discharge protection, short circuit protection, temperature protection.

Customization Options

Sunder is an OEM and ODM manufacturer. The list below is what is decided by the customer rather than by us.

  • Series and parallel arrangement to reach the voltage and capacity you need
  • Case, terminal and cable length to match the equipment it replaces
  • Connector fitted to your mating part
  • Custom logo and label
  • Dimensions made according to the device's request
What we need from you. Voltage, capacity or run time, peak current, the space available, the connector on your board and the operating temperature range. A drawing or the pack you use now answers most of these at once.

Use Guide

  1. Charge with CC then CV

    Charge at constant current, normally 0.2C to 0.5C, until the cell reaches 3.65V, then hold that voltage until the current tails off. At pack level that is 55~56V.

  2. Respect the charge floor

    Charge between 0℃ and 45℃. Charging a frozen pack is the most common way an outdoor battery is damaged, and it is a controller setting.

  3. Do not rely on the protection board

    The board is a backstop against faults, not a charging strategy. Set the charger correctly first.

  4. Store around 20℃

    Store in the shipment state at roughly 20℃. The storage window per duration is published in the parameter table.

Questions About The Battery storage

What are the nominal voltage and capacity of the Battery storage?

Nominal voltage 51.2V and typical capacity 200Ah. The full parameter table is published on this page.

How many cycles does it give?

The LiFePO4 Battery Packs range is published at more than 2000 cycles with 80% capacity remaining at 100% DOD.

What charge voltage should I use?

55~56V, charged constant current then constant voltage. The normal charge current is 0.2C to 0.5C and the maximum is 1C.

What does it weigh?

Approximately 90KG. The dimension and weight for every model in the range are in the model list on this page.

Can you build this to our own size and connector?

Yes. The charge and discharge current can be customised and the dimension is made according to the device's request. Custom logo is available.

Can I get a sample first?

After price confirmation, you can request our battery samples to test.

Quote The Battery storage

Tell us the quantity, the delivery date you are working to and any change you need to the standard build.

Request A Quote Talk To An Engineer Request A Sample