Cycle Life
The LiFePO4 Battery Packs range is published at more than 2000 cycles with 80% capacity remaining at 100% DOD.
48V lifepo4 battery
48V lifepo4 battery 50Ah with RS485 and CAN communication for household energy storage, with long cycle life, 0.2C-1C discharge rate and customised BMS.
Category: LiFePO4 Battery Packs
Product Overview
48V LiFePO4 Battery 50Ah With RS485 And CAN Communication
Model: ESS4850. Dimension: 483*400*133mm.
Key Benefits
Stated Electrical Data
Nominal voltage 51.2V, typical capacity 50Ah. The complete parameter table is published below, not summarised.
Built-in Protection
Automatic protection for over-charge, over-discharge, over-current and over-temperature, with internal cell balancing.
Working Range
Operating temperature is published per state. Charge: 0~45℃; Discharge: -20~60℃; Storage: -10~45℃.
Built To Order
Capacity, arrangement, case, terminal, cable, connector and custom logo are all specified by the customer. Dimensions are made according to the device's request.
Application Scenarios
Used across solar street light assemblers who buy a finished 12v or 24v pack, energy storage integrators needing 48v modules with rs485 or can.
Who It Is For
- Solar street light assemblers who buy a finished 12V or 24V pack
- Energy storage integrators needing 48V modules with RS485 or CAN
- Equipment builders replacing a sealed lead acid block of a fixed size
Problems It Solves
- Packs that fit the electrical spec but not the box
- Systems with no cell balancing, where one weak cell ends the pack
- Lead acid weight in a product that has to be carried or pole mounted
Specifications
48V LiFePO4 Battery 50Ah Data Sheet
| Nominal voltage | 51.2V |
|---|---|
| Nominal capacity | 50Ah |
| Charge voltage | 54V / 58V |
| Discharge cut-off voltage | 44.8V |
| Charge mode | CC-CV |
| Charge current | 10A (0.2C) |
| Discharge current | 10A (0.2C) |
| Max. Charge current | 50A (1C) |
| Max. Discharge current | 50A |
| Peak discharge current | 55A (3s) |
| Cycles | [email protected] 70%DOD |
| Warranty | 1 year |
| Operating temperature | Charge: 0~45℃; Discharge: -20~60℃; Storage: -10~45℃ |
| Weight | Approx 31.5KG |
| Communication port | RS485 / RS232 / CAN |
| BMS | Built-in BMS |
| Display | LCD |
Data sheet published by Sunder Battery for this model.
LiFePO4 Battery 50Ah Advantages
Power battery, long life, safety durable, over voltage protection, over-current protection, over-charge protection, over-discharge protection, short circuit protection, temperature protection.
Customization Options
Sunder is an OEM and ODM manufacturer. The list below is what is decided by the customer rather than by us.
- Series and parallel arrangement to reach the voltage and capacity you need
- Case, terminal and cable length to match the equipment it replaces
- Connector fitted to your mating part
- Custom logo and label
- Dimensions made according to the device's request
What we need from you. Voltage, capacity or run time, peak current, the space
available, the connector on your board and the operating temperature range. A drawing or the pack you use now
answers most of these at once.
Use Guide
Charge with CC then CV
Charge at constant current, normally 0.2C to 0.5C, until the cell reaches 3.65V, then hold that voltage until the current tails off. At pack level that is 54V / 58V.
Respect the charge floor
Charge between 0℃ and 45℃. Charging a frozen pack is the most common way an outdoor battery is damaged, and it is a controller setting.
Do not rely on the protection board
The board is a backstop against faults, not a charging strategy. Set the charger correctly first.
Store around 20℃
Store in the shipment state at roughly 20℃. The storage window per duration is published in the parameter table.
Questions About The 48V lifepo4 battery
What are the nominal voltage and capacity of the 48V lifepo4 battery?
Nominal voltage 51.2V and typical capacity 50Ah. The full parameter table is published on this page.
How many cycles does it give?
The LiFePO4 Battery Packs range is published at more than 2000 cycles with 80% capacity remaining at 100% DOD.
What charge voltage should I use?
54V / 58V, charged constant current then constant voltage. The normal charge current is 0.2C to 0.5C and the maximum is 1C.
What does it weigh?
Approximately 31.5KG. The dimension and weight for every model in the range are in the model list on this page.
Can you build this to our own size and connector?
Yes. The charge and discharge current can be customised and the dimension is made according to the device's request. Custom logo is available.
Can I get a sample first?
After price confirmation, you can request our battery samples to test.
Related Products
LiFePO4 Battery Packs
10kWh battery
Product: 48V 10kWh 200Ah LiFePO4 battery · Model: ESS48200
View data sheet
LiFePO4 Battery Packs
12.8V 200Ah LiFePO4 battery packs
Size: 243*258*391mm · Application: solar energy storage
View data sheet
LiFePO4 Battery Packs
12.8V 26650 lifepo4 battery
Dimension: 28*110*72mm · Model: IFR26650 4S1P
View data sheet
LiFePO4 Battery Packs
12.8V 30Ah LiFePO4 battery
Product: lithium iron phosphate battery · Model name: LFP1230
View data sheet