Cycle Life
The LiFePO4 Battery Packs range is published at more than 2000 cycles with 80% capacity remaining at 100% DOD.
25.6V 36Ah LiFePO4 lithium battery
25.6V 36Ah LiFePO4 lithium battery with BMS covering over-charge, over-discharge, over-current and short circuit protection, applied in draggers, energy storage and solar street light systems.
Category: LiFePO4 Battery Packs
Product Overview
25.6V 36Ah LiFePO4 Lithium Battery
Size: 150*180*230mm.
Key Benefits
Stated Electrical Data
Nominal voltage 25.6V, typical capacity 36Ah. The complete parameter table is published below, not summarised.
Built-in Protection
Automatic protection for over-charge, over-discharge, over-current and over-temperature, with internal cell balancing.
Working Range
Operating temperature is published per state. Charge: 0~45℃; Discharge: -10~60℃.
Built To Order
Capacity, arrangement, case, terminal, cable, connector and custom logo are all specified by the customer. Dimensions are made according to the device's request.
Application Scenarios
Application: energy storage, solar street light, solar panel systems, dragger etc.
Who It Is For
- Solar street light assemblers who buy a finished 12V or 24V pack
- Energy storage integrators needing 48V modules with RS485 or CAN
- Equipment builders replacing a sealed lead acid block of a fixed size
Problems It Solves
- Packs that fit the electrical spec but not the box
- Systems with no cell balancing, where one weak cell ends the pack
- Lead acid weight in a product that has to be carried or pole mounted
Specifications
25.6V 36Ah LiFePO4 Lithium Battery Parameter
| Item | Rating | Note |
|---|---|---|
| 1.1 Capacity | Typical: 36Ah | Discharge: 0.2CmA |
| Min.: 35Ah | ||
| 1.2 Nominal Voltage | Average 25.6V | |
| 1.3 Discharge Cut-off Voltage | 20.0V | |
| 1.4 Charge Current | 7A | |
| 1.5 Charge Voltage | 29.2V | |
| 1.6 Max. Charge Current | 10A | |
| 1.7 Energy | 921.6Wh | |
| 1.8 Continuous discharge current | 10A | |
| 1.9 Max. discharge current | 36A | |
| 1.10 Weight | Approx 7.5kg | |
| 1.11 Operating Temperature | Charge: 0~45℃ | |
| Discharge: -10~60℃ | ||
| 1.12 Storage Temperature | <1 month: -20~35℃ | Recommended storage temperature: 20℃, at the shipment state |
| <3 month: -10~35℃ |
Data sheet published by Sunder Battery for this model.
Comparison With Other Products In This Range
The 25.6V 36Ah LiFePO4 lithium battery is one line of the range below. Compare the capacity, dimension and maximum discharge current before deciding, because a pack sized on capacity alone is often the wrong pack.
| Model | Nominal voltage (V) | Nominal Capacity (Ah) | Dimension T*W*H (mm) | Cycles | Max. discharge current (A) | Weight (Kg) |
|---|---|---|---|---|---|---|
| IFR26650-12010 | 12.8 | 10 | 151*98*95 | ≥2000 | 20 | 1.6 |
| IFR26650-12015 | 12.8 | 15 | 155*115*75 | ≥2000 | 30 | 2.2 |
| IFR26650-12020 | 12.8 | 20 | 182*77*170 | ≥2000 | 40 | 2.6 |
| IFR26650-12030 | 12.8 | 30 | 267*77*170 | ≥2000 | 60 | 3.8 |
| IFR26650-12040 | 12.8 | 40 | 223*120*175 | ≥2000 | 80 | 4.8 |
| IFR26650-12050 | 12.8 | 50 | 223*150*178 | ≥2000 | 75 | 5.8 |
Table published by Sunder Battery for this product family.
Customization Options
Sunder is an OEM and ODM manufacturer. The list below is what is decided by the customer rather than by us.
- Series and parallel arrangement to reach the voltage and capacity you need
- Case, terminal and cable length to match the equipment it replaces
- Connector fitted to your mating part
- Custom logo and label
- Dimensions made according to the device's request
What we need from you. Voltage, capacity or run time, peak current, the space
available, the connector on your board and the operating temperature range. A drawing or the pack you use now
answers most of these at once.
Use Guide
Charge with CC then CV
Charge at constant current, normally 0.2C to 0.5C, until the cell reaches 3.65V, then hold that voltage until the current tails off. At pack level that is 29.2V.
Respect the charge floor
Charge between 0℃ and 45℃. Charging a frozen pack is the most common way an outdoor battery is damaged, and it is a controller setting.
Do not rely on the protection board
The board is a backstop against faults, not a charging strategy. Set the charger correctly first.
Store around 20℃
Store in the shipment state at roughly 20℃. The storage window per duration is published in the parameter table.
Questions About The 25.6V 36Ah LiFePO4 lithium battery
What are the nominal voltage and capacity of the 25.6V 36Ah LiFePO4 lithium battery?
Nominal voltage 25.6V and typical capacity 36Ah. The full parameter table is published on this page.
How many cycles does it give?
The LiFePO4 Battery Packs range is published at more than 2000 cycles with 80% capacity remaining at 100% DOD.
What charge voltage should I use?
29.2V, charged constant current then constant voltage. The normal charge current is 0.2C to 0.5C and the maximum is 1C.
What does it weigh?
Approximately 7.5kg. The dimension and weight for every model in the range are in the model list on this page.
Can you build this to our own size and connector?
Yes. The charge and discharge current can be customised and the dimension is made according to the device's request. Custom logo is available.
Can I get a sample first?
After price confirmation, you can request our battery samples to test.
Related Products
LiFePO4 Battery Packs
10kWh battery
Product: 48V 10kWh 200Ah LiFePO4 battery · Model: ESS48200
View data sheet
LiFePO4 Battery Packs
12.8V 200Ah LiFePO4 battery packs
Size: 243*258*391mm · Application: solar energy storage
View data sheet
LiFePO4 Battery Packs
12.8V 26650 lifepo4 battery
Dimension: 28*110*72mm · Model: IFR26650 4S1P
View data sheet
LiFePO4 Battery Packs
12.8V 30Ah LiFePO4 battery
Product: lithium iron phosphate battery · Model name: LFP1230
View data sheet