OEM and ODM rechargeable battery manufacturer in Shenzhen since 2008 [email protected]
Sunder Battery logoRechargeable cells and battery packs Request A Quote
12V 200Ah lithium LiFePO4 battery product photo

12V 200Ah lithium LiFePO4 battery

12V 200Ah lithium LiFePO4 battery with BMS and IP55 ABS case, to replace lead acid batteries in solar energy storage and lighting systems.

  • Product: lithium iron phosphate battery
  • Model name: LFP12200
  • Plastic case: ABS
  • Cell and method: IFR32700, 4S34P
Request A Quote Talk To An Engineer Request A Sample

Category: LiFePO4 Battery Packs

Product Overview

12V 200Ah Lithium LiFePO4 Battery

Size: 522*238*218*220mm.

Key Benefits

Cycle Life

The LiFePO4 Battery Packs range is published at more than 2000 cycles with 80% capacity remaining at 100% DOD.

Stated Electrical Data

Nominal voltage 12.8V, typical capacity 200Ah. The complete parameter table is published below, not summarised.

Built-in Protection

Automatic protection for over-charge, over-discharge, over-current and over-temperature, with internal cell balancing.

Working Range

Charge from 0℃ to 45℃ and discharge from -20℃ to 60℃ across the LiFePO4 range.

Built To Order

Capacity, arrangement, case, terminal, cable, connector and custom logo are all specified by the customer. Dimensions are made according to the device's request.

Application Scenarios

Application: solar energy storage, UPS, solar street lighting etc.

Who It Is For

  • Solar street light assemblers who buy a finished 12V or 24V pack
  • Energy storage integrators needing 48V modules with RS485 or CAN
  • Equipment builders replacing a sealed lead acid block of a fixed size

Problems It Solves

  • Packs that fit the electrical spec but not the box
  • Systems with no cell balancing, where one weak cell ends the pack
  • Lead acid weight in a product that has to be carried or pole mounted

Technical Features

  • Using the technology of lithium iron phosphate cell, superior safety, thousands of cycles, 100% DOD, under normal conditions
  • Built-in automatic protection for over-charge, over-discharge, over-current and over-temperature
  • Maintenance free
  • Internal cell balancing
  • Lighter weight, about 40%~50% of the weight of a comparable lead acid battery
  • Can be charged using most standard lead acid chargers
  • Wider temperature range, -20℃~60℃

Specifications

12V 200Ah Lithium LiFePO4 Battery Parameter

12V 200Ah Lithium LiFePO4 Battery Parameter
ItemRatingNote
1.1 CapacityTypical: 200AhDischarge: 0.2CmA
Min.: 200Ah
1.2 Nominal VoltageAverage 12.8V
1.3 Discharge Cut-off Voltage10.0V
1.4 Charge Current40AStandard Charge
1.5 Charge Voltage14.6V
1.6 Charge TimeApprox 6h0.2C
1.7 Energy2560Wh
1.8 Continuous discharge current40A
1.9 Max. discharge current100A
1.10 WeightApprox 27kg
1.11 TerminalM8
1.12 Plastic caseABS
1.13 Water dust resistanceIP55

Data sheet published by Sunder Battery for this model.

Comparison With Other Products In This Range

The 12V 200Ah lithium LiFePO4 battery is one line of the range below. Compare the capacity, dimension and maximum discharge current before deciding, because a pack sized on capacity alone is often the wrong pack.

LiFePO4 Battery Packs With Lead Acid Case Model List
ModelNominal voltage (V)Nominal Capacity (Ah)Dimension T*W*H*TH (mm)CyclesMax. discharge current (A)Weight (Kg)
LFP120612.86151*65*94*100≥200061.05
LFP120712.87151*65*94*100≥200071.06
LFP120912.89151*65*94*100≥200091.35
LFP122412.824181*77*167≥2000243.0
LFP123012.830165*175*125≥2000303.9
LFP125412.854229*138*212*217≥2000546.7
LFP1210012.8100328*172*215*220≥200010013.2
LFP1215012.8150483*170*240≥200010019.2
LFP1220012.8200522*238*218*220≥200010027.0

Table published by Sunder Battery for this product family.

Customization Options

Sunder is an OEM and ODM manufacturer. The list below is what is decided by the customer rather than by us.

  • Series and parallel arrangement to reach the voltage and capacity you need
  • Case, terminal and cable length to match the equipment it replaces
  • Connector fitted to your mating part
  • Custom logo and label
  • Dimensions made according to the device's request
What we need from you. Voltage, capacity or run time, peak current, the space available, the connector on your board and the operating temperature range. A drawing or the pack you use now answers most of these at once.

Use Guide

  1. Charge with CC then CV

    Charge at constant current, normally 0.2C to 0.5C, until the cell reaches 3.65V, then hold that voltage until the current tails off. At pack level that is 14.6V.

  2. Respect the charge floor

    Charge between 0℃ and 45℃. Charging a frozen pack is the most common way an outdoor battery is damaged, and it is a controller setting.

  3. Do not rely on the protection board

    The board is a backstop against faults, not a charging strategy. Set the charger correctly first.

  4. Store around 20℃

    Store in the shipment state at roughly 20℃. The storage window per duration is published in the parameter table.

Questions About The 12V 200Ah lithium LiFePO4 battery

What are the nominal voltage and capacity of the 12V 200Ah lithium LiFePO4 battery?

Nominal voltage 12.8V and typical capacity 200Ah. The full parameter table is published on this page.

How many cycles does it give?

The LiFePO4 Battery Packs range is published at more than 2000 cycles with 80% capacity remaining at 100% DOD.

What charge voltage should I use?

14.6V, charged constant current then constant voltage. The normal charge current is 0.2C to 0.5C and the maximum is 1C.

What does it weigh?

Approximately 27kg. The dimension and weight for every model in the range are in the model list on this page.

Can you build this to our own size and connector?

Yes. The charge and discharge current can be customised and the dimension is made according to the device's request. Custom logo is available.

Can I get a sample first?

After price confirmation, you can request our battery samples to test.

Quote The 12V 200Ah lithium LiFePO4 battery

Tell us the quantity, the delivery date you are working to and any change you need to the standard build.

Request A Quote Talk To An Engineer Request A Sample