Flat Hospital Bed With 250kg Load Capacity
A flat hospital bed built on a thickened powder-coated frame with 4 x 4 cm legs that carry the load without deforming, rated to 250 kg. Three headboard options are available: powder coated, stainless steel and ABS, so a...
Product overview
What This Product Is And Who It Is For
A flat hospital bed built on a thickened powder-coated frame with 4 x 4 cm legs that carry the load without deforming, rated to 250 kg. Three headboard options are available: powder coated, stainless steel and ABS, so a facility can match cost, cleaning routine and appearance. A lightweight waterproof mattress sits on the thickened frame, and the four legs carry anti-slip foot pads so the bed stays stable on hard hospital flooring.
Problems It Solves
- Light-gauge bed frames deform under a heavier patient, which 4 x 4 cm legs and a 250 kg rating prevent
- Fabric mattresses must be laundered between patients, which a waterproof mattress avoids
- Beds slide on hard hospital flooring, which anti-slip foot pads stop
- A single headboard specification cannot serve every ward budget and hygiene level, so three options exist
Who It Is For
- Hospital and clinic procurement departments
- Nursing home and elderly care operators
- Hospital furniture distributors
- Government and NGO hospital equipping programmes
- Home care distributors
Key benefits
Why Buyers Choose It
- Three headboard options let one bed platform serve a budget ward, a high-hygiene area and a home care customer
- 4 x 4 cm legs with a 250 kg load capacity resist the deformation that shows up on light-gauge beds after a year
- Thickened powder-coated frame survives the cleaning routine a ward applies daily
- Waterproof mattress can be wiped between patients rather than laundered
- Anti-slip foot pads keep the bed stable on tile and other hard hospital flooring
- ABS headboards made from raw material rather than recycled stock hold their finish over a long service life
Application scenarios
Where It Is Used
Scenarios
- General hospital ward beds
- Nursing home and long-term care
- Clinic observation and recovery areas
- Home care for bedridden patients
- Field and temporary hospital facilities
- Hospital furniture tender supply
Technical features
How It Is Built
- Three headboard options: powder coated, stainless steel and ABS
- 4 x 4 cm bed legs for load bearing and deformation resistance
- Load capacity up to 250 kg
- Thickened powder-coated bed frame
- Lightweight waterproof mattress
- Anti-slip foot pads on all four legs
- ABS headboard made from raw materials for long service life
Specifications
Technical Data
| Product Type | Flat hospital bed |
|---|---|
| Headboard Options | Powder coated, stainless steel, ABS |
| Bed Legs | 4 x 4 cm |
| Load Capacity | Up to 250 kg |
| Frame | Thickened powder coated |
| Mattress | Lightweight waterproof |
| Foot Pads | Anti-slip on all four legs |
Materials
- Powder-coated steel frame
- Stainless steel or ABS headboards
- Waterproof mattress
Manufacturing Process
- Tube cutting
- Welding
- Powder coating
- Assembly
Quality and compliance
Quality Control And Certification
Quality Control
- Frame welds are inspected before powder coating
- Load capacity is verified against the 250 kg rating
- Coating adhesion and finish are checked
- Headboard fit and foot pad attachment are inspected before packing
Customisation and comparison
Options And Alternatives
Customisation Options
- Headboard material selection across powder coated, stainless steel and ABS
- Frame colour
- Mattress inclusion and specification
- Side rail and IV pole accessory selection
- Export carton and container loading plan
Compared With Other Options
- Nursing beds with lifting functions
- A flat bed costs far less where backrest and leg elevation are not clinically required
- Light-gauge frame beds
- 4 x 4 cm legs and a thickened frame carry 250 kg without deforming
- Beds with fabric mattresses
- A waterproof mattress is wiped between patients instead of being laundered
Use guide
How To Use It Correctly
Step
Check all four anti-slip foot pads are in contact with the floor before use
Step
Keep the load within the 250 kg capacity
Step
Wipe the waterproof mattress and frame between patients according to the facility protocol
Step
Check headboard fixings periodically in high-turnover wards
Step
Use the reserved fixing points for an IV pole where fitted
Related products
Other Products In Hospital Furniture
Manual Nursing Bed With Backrest Leg and Height Adjustment
A manual nursing bed measuring 2250 mm long including the headboard and 1050 mm wide including guardrails, with a bed...
View product →
Electric Nursing Bed With Nurse Control Panel
An electric nursing bed supplied with removable ABS head and foot boards, foldable ABS guardrails with lockable...
View product →
Stainless Steel IV Pole With Adjustable Height and Four Hooks
A mobile intravenous stand used in hospitals, clinics and home care to suspend IV bags and bottles. The stand is built...
View product →
Infusion Row Chair With Stainless Steel IV Stand
An infusion row chair for hospital outpatient departments, clinics and infusion centres, built on a thickened steel...
View product →Related reading
Industries Solutions And Guides
Hospitals and Clinics
Hospital and clinic buyers work against tender deadlines, infection control rules and a budget split across...
Nursing Homes and Elderly Care
In elderly care the cost that matters is staff time, not unit price. A diaper that leaks overnight costs a...
Hospital Department Outfitting
Equipping a ward, a theatre or an outpatient department means buying furniture, equipment and consumables...
Export Logistics and After Sales
Qingdao sits next to the largest container port in North China, which is why import and export procedures and...
How to Import Medical Devices From China
Importing medical goods follows the same steps as any import, with two differences that decide whether the...
What to Expect From a Chinese Manufacturer
China's manufacturing sector is built on scale, supply chain depth and adaptability. Understanding where...
Choosing a China Factory for Medical Products
Reputation, location, production capability and communication decide whether a factory suits your order. For...
FAQ
Flat Hospital Bed With 250kg Load Capacity FAQ
What load can the bed carry
Up to 250 kg. The 4 x 4 cm legs and thickened powder-coated frame are what prevent deformation at that load.
Which headboard should we choose
Powder coated is the lowest cost, stainless steel suits high-hygiene areas, and ABS gives a long service life with a moulded finish. All three are available on the same bed platform.
Is a mattress included
A lightweight waterproof mattress is available with the bed. Confirm whether you want it included with your order.
Do the beds ship assembled
Beds ship disassembled to reduce volume, in export cartons with your shipping marks. Container loading quantity is confirmed with your order.
Can side rails and an IV pole be added
Yes. Accessory selection is confirmed with your order.
What is the minimum order quantity
Minimum quantity depends on the headboard specification and accessories. Send your requirement on WhatsApp for a confirmed figure.
Request A Quote For This Product
Send your quantity, destination market and any labelling requirement. We confirm stock, lead time and the documentation that travels with the goods.