Model RSDA024
MEK SpO2 Sensor Adapter Cable
MEK SpO2 Sensor Adapter Cable (RSDA024) is built to mate with the MEK connector standard used on MEK patient monitors. Supplied with a DB9Pin-DB9Pin termination on a 2.4 m cable. It is listed against 6 monitor models, including MEK MP 100 and MP110.
| Model | RSDA024 |
|---|---|
| Product type | Reusable SpO2 sensor |
| Monitor compatibility | MEK |
| Connector | DB9Pin-DB9Pin |
| Cable length | 2.4 m cable |
| Compatible monitors | MEK MP 100, MP110, MP 400, MP 500, PM 600, MP1000 |
| Warranty | 12 months after shipment |
| Price basis | FOB Shenzhen; CFR or CIF quoted on request |
| Country of manufacture | China |
Value
What It Solves and Why It Is Worth Buying
Problems it solves
- A ward rarely standardises on one monitor brand. Sensors wear out at the cable strain relief long before the monitor does, and original-brand replacements are priced per bed and often discontinued for older monitors still in daily use.
- Ordering MEK-terminated spares brand by brand splits a single purchase into several suppliers and several shipments.
- Ronseda quotes FOB Shenzhen and ships within one week of cleared payment when the item is in stock.
Key benefits
- One supplier covers every connector style on the ward, so spares arrive in a single shipment instead of being chased brand by brand.
- The DB9Pin-DB9Pin termination is fixed, so the part either fits the monitor socket or it does not — there is no adapter guesswork at the bedside.
- A published compatibility list of 6 monitor models lets the buyer confirm fit before the order rather than after delivery.
- Warranty runs 12 months after shipment, and returns are accepted for quality reasons inside that period.
- OEM and ODM versions of this part are available when a distributor needs its own labelling.
Specification
Technical Features
- 4M Long Cable
Compatibility
Compatible Monitor Models
- MEK MP 100
- MP110
- MP 400
- MP 500
- PM 600
- MP1000
Listed by Ronseda for this part number. If your monitor is not on the list, send the model and a photograph of the socket and we will confirm before you order.
Application
Who It Is For and Where It Is Used
Who it is for
- Hospital biomedical engineering teams, monitor service companies and distributors who keep patient monitors of mixed makes running from one shelf of spare sensors.
- Specifically, any department running MEK monitors that needs a matched replacement rather than a universal adapter.
- Distributors and dealers who consolidate a mixed accessory list into one shipment from one factory.
Application settings
- General wards and inpatient beds
- Operating theatres and recovery
- Emergency departments and ambulances
- Outpatient and day-surgery clinics
Use guide
Use and Handling Guide
- Check that the monitor socket matches the DB9Pin-DB9Pin termination before connecting; do not force a partly seated plug.
- Inspect the cable along its whole length for cuts, kinks and exposed conductor before each use.
- Route the cable clear of bed rails and trolley wheels; most failures start as a crush at the strain relief.
- Clean with the agent named in the monitor manual; do not immerse the connector or autoclave the assembly.
- Replace the part when the trace becomes intermittent as the cable is flexed near the connector.
Buying terms
Quality Control Customisation and Terms
Quality control
Production runs under the factory quality control system and every shipment is inspected before it leaves Shenzhen.
Customisation
OEM and ODM services are available according to customer requirements. On accessory lines that includes specified connectors, cable lengths and customer labelling.
Certification
Certificate numbers and scopes are supplied on request with the quotation. We do not publish certification claims we cannot evidence.
Comparison
How It Compares With The Rest Of The Range
| MEK Adult Fingerclip SpO2 Sensor | Same family, DB9Pin termination and 2.7 m cable. |
|---|---|
| MEK Adult Silicone Softtip SpO2 Sensor | Same family, DB9Pin termination and 2.7 m cable. |
FAQ
Questions About MEK SpO2 Sensor Adapter Cable
Which monitors does the MEK SpO2 Sensor Adapter Cable fit?
Ronseda lists it against MEK MP 100, MP110, MP 400, MP 500, PM 600, MP1000. If your monitor is not on that list, send the model name and a photograph of the socket and we will confirm before you order.
Can the connector be changed?
This part is supplied with a DB9Pin-DB9Pin termination. Other terminations in the same range are available as separate part numbers, and OEM versions can be built to a specified connector on request.
Is another cable length available?
The standard build is 2.4m long cable. Other lengths are made to order under OEM terms; state the length you need when requesting a quote.
What warranty applies?
12 months after shipment. Returns are accepted for quality reasons within the warranty period, excluding misuse, negligence or accident. Contact sales for confirmation before returning anything.
What are the payment and delivery terms?
FOB Shenzhen; CFR or CIF quoted on request. 100% T/T in advance or Western Union preferred; irrevocable L/C at sight accepted. Shipment is arranged within one week of cleared payment when the item is in stock, by DHL, UPS, FedEx or a courier you nominate.
Can I order a sample first?
Yes. Samples are available once sample charges are received, and for accessories the sample charge is refunded when the order is confirmed.
Request a quotation for MEK SpO2 Sensor Adapter Cable
Quote reference RSDA024. Send the quantity and destination port and we reply with the price basis, packing detail and lead time.