External Sidestream EtCO2 Sensor
The External Sidestream EtCO2 Sensor is a capnography monitor supplied by Ronseda under model ET300. It is listed as compatible with Respronics Loflo sensor module.
EtCO2 Monitors · External EtCO2 Sensor
| Model | ET300 |
|---|---|
| Product type | EtCO2 Monitor |
| Type | External EtCO2 Sensor |
| Compatible monitors | Respronics Loflo sensor module |
| Warranty | 18 months after shipment |
| Price basis | FOB Shenzhen; CFR or CIF quoted on request |
| Country of manufacture | China |
Product Overview
ET300 is an external plug and play sidestream co2 sensor. It does not occupy any host space and connects to host just with one eight-pin plug. ET300 features cutting-edge technology for measurement of instantaneous CO2 concentration, respiration rate, end-tidal CO2 concentration, inspired CO2 concentration, inspiration time and expiration time. It is generally used in patient monitor and anesthetic machine. With a sampling rate low to 50 mL/min, it is ideal for use on adult, pediatric and infant patients; patients undergoing procedural sedation; and short- term monitoring of intubated patients.
CO2 gas concentration (mm Hg), End-tidal CO2, Inspired CO2, Respiratory Rate, Automatic barometric pressure compensation.
As listed by the manufacturer
- Product Introduction
- Product Features
- State-of-the-art Non-dispersive infrared (NDIR) technology, dual wavelength, no moving parts
- Breath-by-breath CO2 monitoring
- Sample rate low to 50 mL/min
- Barometer pressure and temperature compensation
- Range calibration in 0 – 15% by manufacturer
- Fast warmup time ensures full accuracy within 5 minutes
- Oxygen, N2O and anesthetic compensation for accurate measurement
- Low power consumption less than 2W
- Fully compatible with Respronics Loflo sensor module
- Technical Specifications
What It Solves and Why It Is Worth Buying
Problems it solves
- Pulse oximetry confirms oxygenation but lags ventilation. A displaced airway shows on capnography in seconds and on SpO2 much later.
- Equipment bought without a spares and accessory plan becomes hard to keep in service once the first consumable runs out.
- Stock items ship within one week of cleared payment, which keeps a replacement inside the service window.
Key benefits
- Capnography gives breath-by-breath confirmation that the airway is placed and the patient is ventilating.
- A published compatibility list of 1 monitor models lets the buyer confirm fit before the order rather than after delivery.
- Warranty runs 18 months after shipment, and returns are accepted for quality reasons inside that period.
- The same factory supplies more than 100 countries, so export documentation and packing are routine rather than a one-off.
Technical Features
- 1 mm Hg 0 to 50 mm Hg
- 25 mm Hg 50 to 114 mm Hg
- VA 5.0V
- Shield Shield
- DGND Digital return
- VSRC Unused
- TxD Serial data from LH800
- RxD Serial data from Host
- AGND Analog return
- SYNC Unused
Compatible Monitor Models
- Respronics Loflo sensor module
Listed by Ronseda for this part number. If your monitor is not on the list, send the model and a photograph of the socket and we will confirm before you order.
Who It Is For and Where It Is Used
Who it is for
- Anaesthesia and intensive care teams, ambulance services and distributors supplying airway monitoring.
- Distributors and dealers who consolidate a mixed accessory list into one shipment from one factory.
Application settings
- Anaesthesia and procedural sedation
- Intubation and airway confirmation
- Intensive care ventilation
- Ambulance and transfer
Use and Handling Guide
- Unpack and check the unit against the packing list before the installation date, and keep the carton until commissioning is complete.
- Confirm the mains voltage and plug standard against local supply before first power-up.
- Charge the internal battery fully before the first clinical use if the unit is battery equipped.
- Work through the operating manual with the clinical users who will run the device day to day, not only with the engineer who installs it.
- Record the serial number and shipment date against the warranty period so a claim can be raised without searching for paperwork.
Quality Control Customisation and Terms
Quality control
Production runs under the factory quality control system and every shipment is inspected before it leaves Shenzhen.
Customisation
OEM and ODM services are available according to customer requirements. On accessory lines that includes specified connectors, cable lengths and customer labelling.
Certification
Certificate numbers and scopes are supplied on request with the quotation. We do not publish certification claims we cannot evidence.
How It Compares With The Rest Of The Range
| Sidestream CO2CGM Module | Same family, model ET600. |
|---|---|
| Handheld EtCO2 Monitor | Same family, model H100. |
| Mainstream EtCO2 Sensor | Same family, model ET100. |
Guides and Programmes For This Product
Questions About External Sidestream EtCO2 Sensor
Which monitors does the External Sidestream EtCO2 Sensor fit?
What warranty applies?
What are the payment and delivery terms?
Can I order a sample first?
Request a quotation for External Sidestream EtCO2 Sensor
Quote reference ET300. Send the quantity and destination port and we reply with the price basis, packing detail and lead time.