Home/RESUNYOU Brand TBR/On Off Road/RDC986
RDC986
The reinforced belt and body construction supports heavy loads, while the special tread compound resists cuts and abrasions. It is available in 12.00R24 20PR, mounted on an 8.50 rim, suitabl
Overview
The reinforced belt and body construction supports heavy loads, while the special tread compound resists cuts and abrasions. It is available in 12.00R24 20PR, mounted on an 8.50 rim, suitable for mixed terrain use in regional and distribution operations.
- ISO9001
- ISO/TS16949
- CCC
- E-mark
- DOT
- GSO/GCC
- SONCAP
- INMETRO
- NOM
What RDC986 Gives the Operator
Reinforced belt and body construction improves load-carrying capacity and durability on rough terrain
Special tread compound resists cuts and abrasions from stones and debris on unpaved roads
20 ply rating provides strong casing life for operators planning retread cycles
12.00R24 size offers high load capacity suitable for heavy-duty regional transport
Balanced tread design maintains stability on both tarmac and loose surfaces
Application Scenarios
- Regional distribution runs with mixed paved and unpaved road conditions
- Construction site access and haulage on gravel or dirt roads with occasional tarmac
- Fleet operations in developing markets where road quality varies across routes
- Truck and bus driving wheel positions requiring durability beyond standard on-road tyres
Who It Is For
- Importers seeking a durable driving wheel tyre for mixed terrain use in the 12.00R24 size
- Fleet operators running trucks on variable road surfaces with frequent off-road exposure
- Distributors who need a single pattern to cover both paved and non-paved driving wheel applications
What It Is Meant To Fix
Driving tyres that fail prematurely due to tread cuts on gravel or rough terrain
Casing damage from heavy loads on uneven surfaces leading to early retirement
Inadequate load support on non-paved roads causing belt separation or casing failure
Lack of retreadable casings in mixed-use patterns, increasing total cost per kilometre
Published Data For RDC986
These are the figures published for this product. Anything not listed here is confirmed in writing before an order.
| Size | PR | Standard Rim | Load Index and Speed | Overall Dia mm | Section Width mm | Max Load kg Single/Dual | Max Pressure kPa |
|---|---|---|---|---|---|---|---|
| 12.00R24 | 20 | 8.50 | 160/157K | 1226 | 313 | 4500/4125 | 900 |
Technical Features
- Reinforced belt and body construction for enhanced load and impact resistance
- Special tread compound designed to resist cuts and abrasions on rough surfaces
- 12.00R24 size with 20 ply rating for long casing life and retreadability
- 8.50 rim mounting for compatibility with standard truck wheel configurations
- High maximum load capacity of 4500 kg single and 4125 kg dual at 900 kPa
Customisation
- Container loading planned across sizes and patterns in one shipment
- Sidewall marking and labelling to suit the destination market on request
Quality Control
- X-ray inspection of the finished casing before packing
- Dynamic balance check on the production line
- Production under ISO9001 and ISO/TS16949 systems
How It Compares
Getting the Most Out Of It
- Fit to the driving wheel position only, not for steer or trailer axles
- Set cold pressure to the actual load carried, not the maximum sidewall rating
- Inspect tread and casing regularly for cuts or embedded stones, especially after off-road use
- Maintain even tread depth between paired duals to avoid uneven axle loading
RDC986 Questions
Is this a steer or drive pattern
It is a driving wheel pattern. Use it only on the driving axle.
Can the casing be retreaded
The casing is built for retreading. Acceptance depends on the retreader and how the tyre was used. Confirm with your retreader before ordering in volume.
Which approvals apply to RDC986
Our products are approved under ISO9001, ISO/TS16949, CCC, E-mark, DOT, GSO/GCC, SONCAP, INMETRO and NOM. Which marking your shipment needs depends on the destination market, so confirm it before the order is placed.
Can RDC986 be shipped with other patterns in one container
Yes. Truck tyres, car tyres, off the road tyres and wheels are routinely loaded into the same container. Send the sizes and quantities per size and we will plan the load.
How do I get a price for RDC986
Email [email protected] with the sizes and quantity you need. The email button on this page pre fills RDC986 in the subject line so the enquiry reaches the right desk.
How are the goods packed and inspected before shipment
Goods are checked and packed for container transport before loading. Specific packing and marking requirements are agreed per order.
Get Pricing For RDC986
Send the sizes and quantity per size. We will confirm availability, the approval marking for your market and a container plan.