Home/Wheels and Rims/Tubeless Steel Wheels/24.5×8.25
24.5×8.25
24.5×8.25 is a steel rim designed for heavy-duty truck applications, featuring a 10-bolt pattern and a 169 mm offset for stable axle positioning. It supports a rated load of 3250 kg and is b
Overview
24.5×8.25 is a steel rim designed for heavy-duty truck applications, featuring a 10-bolt pattern and a 169 mm offset for stable axle positioning. It supports a rated load of 3250 kg and is built for use with tyres on the drive or trailer axle in commercial transport. The rim profile ensures secure mounting and even load distribution on paved and rough surfaces.
- ISO9001
- ISO/TS16949
- CCC
- E-mark
- DOT
- GSO/GCC
- SONCAP
- INMETRO
- NOM
What 24.5×8.25 Gives the Operator
10-bolt pattern with φ285.75 PCD ensures secure fit on standard truck hubs
169 mm offset provides balanced axle alignment and reduces lateral stress
SR22 screw hole type allows for reliable fastening with standard wheel nuts
V3-20-4 valve type supports consistent air pressure retention
Wind hole design with 2-116×86 configuration improves rim strength under dynamic loads
Application Scenarios
- Heavy haul transport on national highways with consistent axle loading
- Regional distribution fleets operating on mixed road surfaces including gravel and tarmac
- Truck operators using dual rear wheels where rim stability under load is critical
Who It Is For
- Truck importers sourcing steel rims for container shipments
- Fleet operators replacing rims on older truck models with 24.5×8.25 specifications
- Distributors needing a standard rim size compatible with common TBR tyre sizes
What It Is Meant To Fix
Rims that wobble or misalign due to incorrect offset or bolt pattern
Valve leaks caused by mismatched or low-quality valve fittings
Hub damage from improper bolt hole configuration or insufficient rim strength
Inconsistent load distribution due to poor rim profile or offset mismatch
Published Data For 24.5×8.25
These are the figures published for this product. Anything not listed here is confirmed in writing before an order.
- Model24.5×8.25
- Rated Load3250kg
- Distributed Circle (PCD)φ285.75
- Bolt Hole10-φ32
- Center Holeφ222
- Screw Hole TypeSR22
- Offset169
- Wind Hole Type2-116×86
- Valve TypeV3-20-4
Technical Features
- Model 24.5×8.25 with 10-φ32 bolt holes on φ285.75 PCD
- Center hole φ222 for compatibility with standard hub sizes
- Offset 169 mm for balanced axle positioning
- Wind hole type 2-116×86 for improved structural integrity
- Valve type V3-20-4 for reliable air retention and pressure control
Customisation
- Rims can be packed with or without valve caps based on buyer request
- Surface finish options available upon specification, including galvanised or painted
- Container loading can include mixed rim models and sizes in one shipment
Quality Control
- Rim dimensions verified against production standards before final assembly
- Bolt hole alignment checked for consistency across batches
- Surface finish inspected for cracks, burrs, or defects before packaging
How It Compares
- Compared with A rim with smaller offset169 mm offset improves wheel alignment and reduces lateral stress on the axle
- Compared with A rim with non-standard valve typeV3-20-4 valve is widely compatible with standard air fittings and reduces leak risk
Getting the Most Out Of It
- Ensure the rim is mounted on a hub with matching center hole φ222
- Use the correct torque specification when tightening the 10-φ32 bolts
- Check valve type and condition before mounting the tyre
- Inspect rim surface for damage before installation to prevent air leaks
24.5×8.25 Questions
What is the bolt pattern for the 24.5×8.25 rim
It has a 10-bolt pattern with φ285.75 PCD and φ32 bolt holes
What is the offset of this rim
The offset is 169 mm, which provides balanced axle positioning
Can this rim be used on drive or trailer axles
Yes, it is suitable for both drive and trailer axle positions
What valve type does it use
It uses a V3-20-4 valve, compatible with standard air fittings
Is the rim compatible with 24.5 inch tyres
Yes, the 24.5×8.25 rim is designed for 24.5 inch tyre sizes
Can different rim sizes be mixed in one container
Yes, container loading can include multiple rim models and sizes
Get Pricing For 24.5×8.25
Send the sizes and quantity per size. We will confirm availability, the approval marking for your market and a container plan.