L14-30P,L14-30R
NEMA locking cord sets use a twist-lock plug that is inserted and rotated so the blades sit behind the socket contacts. The connection cannot vibrate loose or be pulled out, which is why they are used on stage rigs, generators, pumps and any equipment where an accidental disconnection would matter.
| Model No | LA047A /LA048A |
|---|---|
| Rating | 20A,125V/250V |
| Wire gauge and type | 16/4 SJT/SJTO/SJTOO SJTW/SJTOW/SJTOOW 13A 14/4 SJT/SJTO/SJTOO SJTW/SJTOW/SJTOOW 18A 12/4~10/4 20A~30A SJW/SJOW/SJOOW SJEW/SJEOW/SJEOOW SJTW/SJTOW/SJTOOW SW/SOW/SOOW SEW/SEOW/SEOOW STW/STOW/STOOW |
| Approval | UL/CUL |
- 4~Conductor Locking Cords
Cord length, cable gauge and type, jacket colour and the connector at the appliance end are set per order. Complete OEM services are available.
Who It Is For
- Stage, event and rental companies building power distribution
- Generator and pump equipment makers
- Industrial machinery builders that need a secured supply cord
- Data centre and equipment integrators using twist-lock outlets
Problems It Solves
- The plug stays engaged under vibration and cable movement
- Matched plug and connector sets so the whole run comes from one supplier
- Jacketed cable grades that survive being dragged across a floor
- Cord lengths built to the run rather than coiled and cable-tied
Where It Is Used
- Stage lighting and event power
- Generators and portable power
- Pumps, compressors and shop equipment
- Industrial control panels
How It Is Made
The plug is moulded directly onto the cable on our own tooling, so there is no screw joint and no field wiring. The company runs first class producing equipment and advanced mould processing equipment, and quality control is applied at each stage rather than only at the end.
This range covers L5-15P, L5-20P, L5-30P, L6-15P, L6-20P, L6-30P, L7-15P, L7-20P, L8-20P, L14-20P and L14-30P patterns, supplied as plug-only cords or as plug and connector sets on SJT, STW, SOOW and similar jacketed cable.
How we control qualityCustomisation Options
- Cord length to your drawing rather than a fixed catalogue length
- Cable gauge, conductor count and jacket type selected against the load and environment
- Jacket colour and printed marking on request
- Appliance end supplied as an IEC connector, a moulded outlet, ring terminals or stripped and tinned leads
- Retail or bulk packing, with your own artwork where required
Products are RoHS compliant and carry international approvals including UL, cUL, VDE, SAA, BSI, IMQ depending on the destination market. See the certificates.
2004
Exporting since
20+
International approvals
3–4 weeks
Delivery time
12 hours
Enquiry response
Related Products in NEMA Locking Power Cords
Questions About NEMA Locking Power Cords
What does the L number mean?
It identifies the NEMA locking configuration, which sets the voltage, the current rating and the number of poles. L5-30 for example is 30 A at 125 V, while L14-30 is a 30 A four-wire 125/250 V pattern.
Can I get a matching connector on the other end?
Yes. Plug and connector sets are standard in this range.
Which cable should I use outdoors?
Use a W rated jacketed cable such as STW, SJTOW or SOOW. Tell us the environment and we will confirm.
Are these UL approved?
Yes, this range is produced to UL and cUL approval.
Ask About L14-30P,L14-30R
Tell us the quantity, the cable and the length. A quotation follows within twelve hours.