Oxygen Supply And Concentrator Sizing For Chambers
Flow rate, concentration and delivery method - how the gas side of a chamber system is specified.
On this page
Two gases, one cabinet
A mild hyperbaric chamber needs two supplies: pressurised air to raise the chamber to working pressure, and concentrated oxygen for the user to breathe through a mask or nasal cannula. The Oxygen Times All-in-One machine combines the oxygen concentrator and the air compressor in a single compact body, which is why the chamber range quotes one unit rather than two.
Concentration
The soft-shell packages deliver up to 93% oxygen concentration with a tolerance of plus or minus 3%, through a mask or nasal cannula. Larger integrated systems are quoted at up to 93-95% depending on configuration. Anyone quoting 99% from a pressure-swing adsorption concentrator is quoting something that concentrator type does not do.
Flow rate scales with chamber size
| Configuration | Oxygen output |
|---|---|
| OHS Series 1-person version | 10 L/min |
| OHS Series 2-person version | 20 L/min |
| OTS20 compatibility | 10 L/min concentrators |
The pattern is straightforward: one occupant, one 10 L/min stream. A two-person chamber needs double, which is why the OHS Series is quoted as a 10L system or a 20L system rather than as one machine with a bigger label.
Delivery method
Mask or nasal cannula on the chamber range. The OHS Series uses an oxygen headset connected through 6 mm tubing with quick-connect interfaces, which shortens changeover between users.
Compressor behaviour matters more than people expect
The compressor runs for the whole session, not just at the start, because a soft-shell chamber continuously exchanges air to keep CO2 down and the interior fresh. That is why oil-free and low-noise are specified: the user is inside the room with it for an hour.
Planning a second chamber
Keeping the gas system consistent across chambers is worth more than a small unit saving on the second machine. One spare parts list, one set of hoses, one training session for staff.
Buyer questions
Questions On This Topic
Can I use my own oxygen concentrator?
The OTS20 is stated as compatible with 10 L/min concentrators. For other models, confirm with the factory before ordering - the chamber and gas system are quoted as a matched package.
Does the chamber use bottled oxygen?
No. The system generates oxygen from air with a concentrator, so there are no cylinders to store, handle or refill.
What is supplied with the chamber on the gas side?
Chamber, integrated air and oxygen system, oxygen mask, nasal cannula, air hoses, pressure gauge, repair kit, user manual and power cable on the soft-shell packages.
Chambers Mentioned In This Guide

All-in-One Oxygen & Air Machine
Integrated oxygen concentrator and air compressor in one compact unit — the shared power source for our chambers.
Specs and quote
OHS Series Hyperbaric Chamber
Rigid aluminium shell chamber with a 40 mm polycarbonate door, in 1-person and 2-person configurations at 90 kPa.
Specs and quote
OTS20 2.0 ATA Soft Sitting Chamber
Professional portable sitting chamber delivering a true 2.0 ATA in high-strength TPU with a foldable design.
Specs and quote
Handheld Wireless Controller
Wireless handheld controller to monitor and adjust compatible Oxygen Times chambers without leaving your seat.
Specs and quoteKeep Reading
Hyperbaric Chamber Maintenance And Daily Operation
Zippers, filters, seals and gauges - what to check daily, monthly and before every session.
ATA Pressure Explained For Hyperbaric Chamber Buyers
What 1.3, 1.5, 1.9 and 2.0 ATA mean in practice, and how to pick the pressure band before you shortlist a chamber.
Talk to the factory
Ask The Factory Directly
If this guide did not answer your question, send it over WhatsApp. Technical questions reach the engineering team, not a call centre.
Most enquiries answered within 12 hours · OEM and wholesale welcome
