Keeping a Tiled Pool and Bathroom Looking New
Most tile that looks tired is not worn out — it is scaled, filmed with the wrong cleaner, or grouted with something that was never going to survive pool chemistry.
The waterline is a chemistry problem
Scale and body oils collect exactly at the waterline, which is why that band looks dull first. Regular gentle cleaning beats occasional aggressive cleaning; abrasive pads on a gloss glass chip leave a haze that no amount of later polishing removes.
What not to use
Avoid abrasive powders on gloss finishes and avoid strong acids on grout. If a specialist product is needed for scale, test it on a spare sheet or on a hidden area first — this is the second good reason to keep spare tile from the original order.
Grout does more of the work than the tile
In pools and showers, failures usually start in the joint rather than in the tile body. Specify a grout suited to continuous immersion in pool work, and keep an eye on movement joints at corners and step nosings.
Bathroom and kitchen surfaces
Matt ceramic hides water spotting better than gloss; gloss cleans faster but shows everything. Neither needs sealing. A soft cloth and a neutral cleaner is the whole maintenance routine for a glazed wall.
Everything in this guide reflects what LSDECO publishes for the series concerned. Where a figure is not published — a slip rating, a thickness, a test report — we say so and ask the factory rather than estimating it.
Collections This Guide Applies To
Other Guides
- Glass or Porcelain for a Swimming Pool
- Chip Size Sheet Size and Why Orders Come Up Short
- Choosing a Waterline Tile You Will Still Like in Five Years
- Where 20 mm Porcelain Pavers Earn Their Cost
- Kit Kat Tile Is a Format Not a Trend
- What To Check Before Your First Order From Foshan
- Mounting Types and What They Mean on Site
Items Referenced in This Guide

Neon Tetra Series Glass Pool Mosaic Tile
A smooth, clear glass mosaic with a light, transparent quality across the blend, developed f…

Goelia Glass Mosaic Tile
This elegant surface glass tile brings subtle textures and impressive classicism. Goelia is …

Lantern Irregular Pool Glass Mosaic Tile
This lantern irregular with its dynamic pattern, shapes and colors, the Lantern line is a ne…

100×300MM Abnormity Series
Irregular shapes are the point of this series: unusual outlines with distinctive colour and …

200×200MM Flower Tile Series
Flower Tile Series with embossed patterns, glossy and matte finishes, and vibrant colors.

Straight Series
Straight Series with Textured ceramic tiles blend modern design with soft colors.

Hot Melting Glass Dot-Mounting Series
The Hot Melting Glass Dot-Mounting Mosaic Series featuring rich colors and textured finishes…

Neon Tetra Series Glass Pool Mosaic Tile
A smooth, clear glass mosaic with a light, transparent quality across the blend, developed f…
Questions on This Topic
Does glass mosaic scratch easily?
Glass mosaic is fired and hard-wearing, but abrasive cleaning tools will dull a gloss finish. Use a soft brush or cloth.
How do I remove scale at the waterline?
Gently and regularly, with a product suited to the tile finish, tested first on a spare sheet. Scale removed weekly needs nothing aggressive; scale left for a season does.
Will the colour change over time?
Colour in crystal glass mosaic sits in the body of the chip rather than on the surface. For a specific series, ask us what the manufacturer states before committing a large exposed area.
Still Deciding Ask Us Directly
Send the drawing, the area or the series you are weighing up. We would rather answer a question before the order than solve a problem after it.
