- Home
- Products
- KIKOO Mag Wireless Charger
- KIKOO Mag Qi2.2 25W Ultra-Thin Wireless Charging Pad
KIKOO Mag Qi2.2 25W Ultra-Thin Wireless Charging Pad
A 4mm aluminium and glass magnetic pad running the Qi2.2 standard at up to 25W, supplied with a 1.2m Type-C cable. Certified Qi2.2, CE, FCC and ROHS.
Product Overview
At 4mm thick this is a pad that disappears on a desk or a nightstand, and it runs the current Qi2.2 power class at up to 25W rather than the 15W most magnetic pads stop at. The body is aluminium alloy and glass, which both looks the part and helps move heat away from the coil. It ships with a 1.2m Type-C cable and accepts a wide input range up to 15V/3A with PPS support, so it works with the PD chargers a customer already owns. Protection covers temperature, over-current, over-voltage and short circuit, with device detection before power is applied.
Key Benefits
- Qi2.2 at 25W, a full power class above the 15W magnetic pads currently on shelves
- 4mm thick, so it reads as a premium accessory rather than a puck
- Aluminium alloy and glass construction helps the coil shed heat, which is what protects sustained output
- Wide PD and PPS input range, so it works with chargers the customer already has
- Protection set published: temperature control, over-current, over-voltage, short circuit and device detection
At A Glance
- Family
- Magnetic Wireless Charger
- Category
- KIKOO Mag Wireless Charger
- Wireless output
- 25W max
- Standard
- Qi2.2
- Input
- 5V/3A, 9V/3A, 12V/3A, 15V/3A (PPS 3.0-18V)
- Thickness
- 4mm
What It Looks Like
Photographs of the product as it is produced. Nothing here is a rendering of a product that does not exist yet.
Who It Is For
- Brands that need a Qi2.2 pad to sit alongside a Qi2.2 power bank
- Hospitality and office fit-out buyers
- Retailers whose customers already own a PD charger and want only the pad
- Gifting programmes at a premium unit price
Problems It Solves
- 15W pads are now the commodity end of the category
- Thick pads look wrong on a designed desk
- Plastic pads trap heat and throttle before the phone is charged
- Pads bundled with a proprietary adapter add cost the customer does not need
Application Scenarios
- Desk and nightstand charging for iPhone 17, 16, 15, 14, 13 and 12 series
- Hotel rooms and meeting rooms where a fixed charger has to look discreet
- Retail ranges that need a Qi2.2 pad above an existing 15W model
- Multi-device households where several pads sit in different rooms
Technical Features
- Qi2.2 magnetic wireless charging, 25W maximum output
- Input 5V/3A, 9V/3A, 12V/3A, 15V/3A, with PPS 3.0-18V
- 1.2m Type-C cable supplied
- 4mm overall thickness
- Aluminium alloy and glass construction
Published Specification
Every row below is reproduced from the factory specification for this model. Rows shown in italics are figures the specification does not publish; we confirm those in writing rather than estimating them here.
| Wireless output | 25W max |
| Standard | Qi2.2 |
| Input | 5V/3A, 9V/3A, 12V/3A, 15V/3A (PPS 3.0-18V) |
| Thickness | 4mm |
| Material | Aluminium alloy + glass |
| Cable | 1.2m Type-C |
| Colour | Black / White |
| Certification | Qi2.2, CE, FCC, ROHS |
Use Guide
- Power it from a PD charger that can supply at least 9V/3A; a 5V-only adapter will hold the pad well below 25W
- 25W requires a phone that supports the Qi2.2 power class; Qi2 phones negotiate 15W
- Keep the pad on a hard surface rather than on fabric, so the aluminium can shed heat
- Thick or metal-bearing cases interfere with both magnet and coil
- No adapter is included in the standard configuration; specify one if the retail pack needs it
Quality Control
- Output verified against the Qi2.2 power profile
- Surface temperature logged through a sustained charge
- Magnet retention force checked per batch
- Cable continuity and connector retention tested
How It Compares With The Alternatives
A technical comparison against other ways of solving the same problem, including the other products in this range. Nothing here is a performance claim against a named competitor product.
| Against a 15W magnetic pad | A full power class faster, with a metal and glass body instead of plastic |
| Against a charging stand | Lower profile and less desk presence; a stand is better if the phone is used while charging |
| Against a cable | Slower and less efficient than a cable, and considerably more convenient |
| Against a car mount charger | Designed for a desk rather than a vent; the car mount adds a bracket and a 12V input |
Customisation And Supply
- Packing as bulk, poly bag or retail pack, specified per order
- Printed or laser-marked housings where the tooling allows it
- Specification sheet supplied by email before the order, not after it
- Samples of the exact configuration before mass production
- Shipped from Shenzhen, China by sea or air
KIKOO Mag Qi2.2 25W Ultra-Thin Wireless Charging Pad Questions
Does a charger come in the box?
What happens with a Qi2 phone rather than Qi2.2?
Is 4mm the whole thickness?
Which protections are built in?
Products Buyers Shortlist Alongside This One
Qi2 15W MagSafe Car Wireless Charger Bracket
A Qi2 15W magnetic car charger on a vent bracket, 30 x 68mm excluding the bracket, 160g, running from a 9-12V/2A car supply. Glass or silicone phone contact surface.
See the specification
KIKOO Mag Wireless Charging Stand
A magnetic MagSafe-compatible charging stand that holds the phone upright at a viewing angle while it charges, for a desk or a bedside table.
See the specification
KIKOO Mag Desktop Lamp Wireless Charging Stand
A desk lamp and a 15W magnetic wireless charger in one object, with a three-gear adjustable night light and a magnetic mount for the phone.
See the specificationGuides That Cover This Product
Request KIKOO Mag Qi2.2 25W Ultra-Thin Wireless Charging Pad
Send the quantity, the destination market and the packing you need. A quotation and the full specification sheet come back by email.