- Home
- Products
- KIKOO Mag Wireless Charger
- Qi2 15W MagSafe Car Wireless Charger Bracket
Qi2 15W MagSafe Car Wireless Charger Bracket
A Qi2 15W magnetic car charger on a vent bracket, 30 x 68mm excluding the bracket, 160g, running from a 9-12V/2A car supply. Glass or silicone phone contact surface.
Product Overview
A car charger that actually holds the phone: the magnetic head takes the place of a spring clamp, so the phone attaches one-handed and stays aligned over the coil through a rough road. Output is the Qi2 15W class at MPP 15W maximum, from a 9-12V /2A car supply. The charging head is 30 x 68mm without the bracket and the assembly weighs 160g. The phone contact surface is offered in glass or silicone, and the bracket is selected to match: different vent geometries need different mounts.
Key Benefits
- Magnetic attach instead of a clamp: one hand, no adjustment, no scratched phone edges
- Qi2 15W (MPP 15W max), which is the full magnetic power class rather than a 7.5W car compromise
- Glass or silicone contact surface, so the specification can match the finish the brand wants
- Different bracket options for different vent geometries, quoted as part of the configuration
- Published mechanical data: 30 x 68mm charging head, 160g assembly
At A Glance
- Family
- Magnetic Wireless Charger
- Category
- KIKOO Mag Wireless Charger
- Wireless output
- MPP 15W max
- Standard
- Qi2 magnetic / MagSafe compatible
- Input
- DC 9V-12V/2A
- Product dimension
- 30 x 68mm (excluding bracket)
What It Looks Like
Photographs of the product as it is produced. Nothing here is a rendering of a product that does not exist yet.
Who It Is For
- Accessory brands adding a Qi2 car SKU
- Automotive aftermarket distributors
- Fleet and ride-hailing buyers fitting vehicles in volume
- Retailers whose car mount range stops at passive holders
Problems It Solves
- Clamp mounts need two hands and mark the phone
- Non-magnetic car pads lose alignment on every bump and stop charging
- 7.5W car chargers lose ground to a navigation app running the screen at full brightness
- One bracket design does not fit every vent
Application Scenarios
- Navigation on a phone held at eye level in a vent mount
- Ride-hailing and delivery drivers charging through a shift
- Fleet vehicles fitted with a standard accessory package
- Automotive aftermarket and accessory retail
Technical Features
- Qi2 magnetic wireless charging, MPP 15W maximum
- Input DC 9V-12V/2A
- Charging head 30 x 68mm, excluding bracket
- Net weight 160g
- Phone contact surface in glass or silicone; bracket selected to match
Published Specification
Every row below is reproduced from the factory specification for this model. Rows shown in italics are figures the specification does not publish; we confirm those in writing rather than estimating them here.
| Wireless output | MPP 15W max |
| Standard | Qi2 magnetic / MagSafe compatible |
| Input | DC 9V-12V/2A |
| Product dimension | 30 x 68mm (excluding bracket) |
| Net weight | 160g |
| Contact surface | Glass or silicone |
| Bracket | Selected per vehicle vent type |
| Certification | Confirmed per order; not published on the source page |
Use Guide
- Run it from a car supply that can hold 9-12V at 2A; a weak socket adapter will throttle the output
- Choose the bracket against the target vehicle's vent geometry before the order
- Glass reads as premium, silicone grips and forgives vibration; pick per market
- Magnetic hold falls with case thickness and with metal plates already stuck to the phone
Quality Control
- Output verified against the Qi2 profile at 9V and 12V input
- Magnet retention force tested with a loaded phone
- Vibration test on the assembled bracket
- Weight and dimensions checked against the drawing
How It Compares With The Alternatives
A technical comparison against other ways of solving the same problem, including the other products in this range. Nothing here is a performance claim against a named competitor product.
| Against a passive vent holder | Charges as well as holds; heavier and needs a power feed |
| Against a clamp charger | One-handed magnetic attach instead of a two-handed clamp, and correct coil alignment every time |
| Against a cable in the car | No plugging in at every trip; slower than a cable and dependent on case thickness |
| Against the desk pad | Built for 12V and vibration rather than for a desk |
Customisation And Supply
- Packing as bulk, poly bag or retail pack, specified per order
- Printed or laser-marked housings where the tooling allows it
- Specification sheet supplied by email before the order, not after it
- Samples of the exact configuration before mass production
- Shipped from Shenzhen, China by sea or air
Qi2 15W MagSafe Car Wireless Charger Bracket Questions
What does MPP 15W mean?
Which bracket will we get?
How heavy is it?
Will it work with a thick case?
Products Buyers Shortlist Alongside This One
KIKOO Mag Qi2.2 25W Ultra-Thin Wireless Charging Pad
A 4mm aluminium and glass magnetic pad running the Qi2.2 standard at up to 25W, supplied with a 1.2m Type-C cable. Certified Qi2.2, CE, FCC and ROHS.
See the specification
KIKOO Mag Wireless Charging Stand
A magnetic MagSafe-compatible charging stand that holds the phone upright at a viewing angle while it charges, for a desk or a bedside table.
See the specification
KIKOO Mag Desktop Lamp Wireless Charging Stand
A desk lamp and a 15W magnetic wireless charger in one object, with a three-gear adjustable night light and a magnetic mount for the phone.
See the specificationGuides That Cover This Product
Request Qi2 15W MagSafe Car Wireless Charger Bracket
Send the quantity, the destination market and the packing you need. A quotation and the full specification sheet come back by email.