Fiber Laser Cutting Machines
Glass Laser Cutting Machine
The Glass Laser Cutting Machine uses a Wuhan Huaray picosecond laser source at 30w, 50w or 70w to cut glass on a 500 x 400 mm marble work table.
Knowledge Centre
Applications of Laser Cutting Machines in the Textile Industry
Published 2025-03-26 by the Weihua Laser engineering desk.
How The Beam Cuts Fabric Without Contact
A CO2 laser generator emits an infrared beam at 10.6 micrometers. Optical focusing concentrates this energy on the textile surface. Heat melts and vaporizes fibers instantly. Auxiliary gas clears residue to form a clean seam. Cotton and synthetic blends respond well to this thermal separation.
Dimensional Stability On Complex Patterns
Mechanical blades deflect on intricate contours. A laser beam does not. CNC control maintains accuracy within plus or minus 0.1 mm. This tolerance holds for lace, applique and small garment components. Edges emerge smooth without fraying. Post processing is largely eliminated.
Throughput On Denim And Heavy Weaves
Speed depends on material weight and laser power. A medium power CO2 source cuts several meters of denim per minute. This rate exceeds traditional mechanical cutting. Production cycles shorten. Batch delivery times improve. Efficiency gains are most visible on repetitive pattern work.
Material Range And Testing Requirements
The source text confirms performance on cotton and denim. Other textiles require validation. Reflective or coated fabrics may need adjusted power settings. Always run a test cut on your specific material before committing to a production batch. We supply sample data where available.
Integration Into Existing Workflow
Laser cutting replaces die cutting for many applications. No tooling costs for new patterns. Digital files drive the machine directly. Setup time reduces significantly when changing designs. This flexibility supports short runs and customized orders. Maintenance involves lens cleaning and alignment checks.
Machines Mentioned Here
All machines
Fiber Laser Cutting Machines
HT Series Enclosure Metal Sheet Tube Fiber Laser Cutter
The HT Series is a fully enclosed fiber laser cutter designed to process both metal sheet and pipe on a single machine.
Fiber Laser Cutting Machines
ET Series Metal Sheet Tube Fiber Laser Cutter
The ET series is a fiber laser cutter for metal sheet and tube in one machine, offered as WH-3015ET, WH-4020ET and WH-6020ET.
Buyer Questions
Questions On This Topic
What is the cutting accuracy for textile machines?
The cutting accuracy is controlled within plus or minus 0.1 mm using the CNC system.
How fast can it cut denim?
A medium power CO2 laser cutter can cut several meters of denim per minute.
Does the laser fray the edges?
No. The heat seals the edge as it cuts, preventing fraying on many synthetic and blended fabrics.
What wavelength does the laser use?
The CO2 generator produces an infrared beam with a wavelength of 10.6 micrometers.
Can it cut thick leather?
The source text specifies cotton and denim. For leather, please provide thickness and type so we can advise on power settings.
Is auxiliary gas required?
Yes. Auxiliary gas blows away molten and vaporized residue to form a precise cutting seam.
Still Not Sure Which Machine Fits
Send the material and the thickness. We answer with a model and the settings that go with it, not a catalogue.