Fiber Laser Cutting Machines
Glass Laser Cutting Machine
The Glass Laser Cutting Machine uses a Wuhan Huaray picosecond laser source at 30w, 50w or 70w to cut glass on a 500 x 400 mm marble work table.
Knowledge Centre
Fiber Laser Marking Machine Operation Tips
Published 2019-07-15 by the Weihua Laser engineering desk.
Daily Maintenance Prevents Wear
Spare parts in a fiber laser marking machine experience wear during long periods of operation. Daily checks identify loose components or degraded surfaces before they affect marking accuracy. Inspect the work table and gantry for debris that could cause crashes or uneven movement.
Protecting The Gantry And Table
Do not touch or crash the work table or gantry while the fiber laser marking machine is running. Physical interference disrupts the laser path and can damage moving parts. Keep the area around the machine clear to prevent accidental contact during operation.
Environmental Conditions For Marking
The processing site must meet standards for temperature and humidity to ensure consistent performance. Keep the work environment clean and tidy to reduce the risk of hand injury and material pollution. A clean workpiece prevents contamination that could affect the marking result.
Pre-Operation System Checks
Before processing work, check the cooling system, laser path system, and lens system. Verify that each component functions normally to ensure the processed effect meets requirements. These checks confirm that the fiber laser marking machine is ready for continuous industrial work.
Laser Source And Scan System
The machine adopts an original imported fiber laser source and a high speed galvo scan system. This configuration provides stable output power and a good laser beam for consistent marking. The marking effect does not fade due to environmental factors.
Machines Mentioned Here
All machines
Fiber Laser Cutting Machines
HT Series Enclosure Metal Sheet Tube Fiber Laser Cutter
The HT Series is a fully enclosed fiber laser cutter designed to process both metal sheet and pipe on a single machine.
Fiber Laser Cutting Machines
ET Series Metal Sheet Tube Fiber Laser Cutter
The ET series is a fiber laser cutter for metal sheet and tube in one machine, offered as WH-3015ET, WH-4020ET and WH-6020ET.
Buyer Questions
Questions On This Topic
What maintenance is required daily?
Inspect the work table and gantry for debris, check the cooling system, laser path system, and lens system to ensure they function normally before starting work.
Can the gantry be touched during operation?
No. Do not touch or crash the work table or gantry while the fiber laser marking machine is running to avoid damage and marking errors.
What environmental conditions are needed?
The processing site must meet standards for temperature and humidity. Keep the place clean and tidy to reduce pollution risks and ensure operator safety.
Will the marking fade over time?
No. The marking effect will not fade due to environmental factors, provided the machine is maintained correctly and the workpiece is kept clean.
What components are checked before work?
Check the cooling system, laser path system, and lens system. Ensure every system can work normally to guarantee the processed effect.
Is the laser source imported?
Yes. The machine adopts an original imported fiber laser source and a high speed galvo scan system for stable output power.
Still Not Sure Which Machine Fits
Send the material and the thickness. We answer with a model and the settings that go with it, not a catalogue.