D02 Fishman floor light with black marble base and linen fabric shade

Model JD2150CH-1D

D02 Fishman Floor Light

D02 Fishman Floor Light is a single-lamp floor lamp with a black marble base and a linen fabric shade, 400 mm wide and 1650 mm tall. The chrome finish is applied to the metal components, and the lamp uses an E27 socket with a foot switch for operation. It is rated IP20 for dry indoor use. Model number is JD2150CH-1D.

Width400mm
O/A Height1650mm
MaterialBlack marble base + Linen fabric shade
FinishChrome
Lamp holderE27
Ingress ProtectionIP20

Request A Quote Email This Model

Custom size and finish are quoted against your drawing. Send the ceiling height or room dimension with your enquiry.

Key Benefits

What This Model Gives You

Linen fabric shade diffuses light evenly without glare, suitable for reading and ambient lighting
Foot switch allows hands-free operation, useful in low-light or busy environments
400 mm width fits well beside a sofa or in a corner without blocking walkways
1650 mm overall height positions the light at eye level when seated, reducing glare
Chrome finish is factory applied so no site touch-up is needed after installation

Problems It Solves

What Goes Wrong Without It

A standard table lamp is too low for reading in a large living room and requires a second light source
A floor lamp with a plastic or metal shade can look harsh and cold in a residential setting
Lamps with wall switches require reaching up or bending down, which is inconvenient
Multiple lamps in a room create clutter and increase the number of ceiling penetrations

Specification

Recorded Specification

Width	400mm
O/A Height	1650mm
Material	Black marble base + Linen fabric shade
Finish	Chrome
Lamp holder	E27
Wattage	60W
Switch	Foot switch
Ingress Protection	IP20

Recorded notes

Other finish available

Materials

Black marble base, a natural stone with variation in tone and veining
Linen fabric shade, woven from natural fibres with a soft texture
Chrome finish applied to the metal frame and switch components

Technical Features

Single E27 lamp position with a 60W total load
Foot switch for hands-free operation
Black marble base with a linen fabric shade
Chrome finish on metal components
IP20 rating for dry indoor interiors
Overall height of 1650 mm and width of 400 mm as standard
Custom overall height available so the drop suits the space

Where It Goes

Application Scenarios

Typical Locations

Residential living room where the lamp is placed beside a sofa for reading light
Hotel guest room corner where a single floor lamp provides ambient light without clutter
Office lounge area where the foot switch allows easy control from a seated position
Retail store display corner where the lamp adds a soft glow without drawing attention to the fixture
Villa entrance hall where the marble base adds weight and stability to a feature lighting piece

Who It Is For

Hotel FF&E buyers specifying lighting for guest rooms and lounges
Interior contractors fitting out private residences and high-end apartments
Retail store buyers building a cohesive lighting scheme for a store layout
Developers standardising lighting in model units or show homes
Lighting wholesalers adding a floor lamp with a natural material base to their range

In Place

Fittings Of This Type On Site

Jedaz fittings installed on site — Jedaz fittings of this type photographed in place

Customisation

What Can Be Changed

Custom overall height available so the drop suits the ceiling
Finish in chrome or another finish on request
Production to your own approved drawing if you are working to an interior design package

How An Order Runs

You send a drawing or the ceiling height and the fitting is re-drawn to suit
Drawings are returned for your written approval before anything is cut
The black marble base is cut and shaped to the approved design
The linen fabric shade is cut and assembled to match the frame
The assembled item is checked against the approved drawing before packing
The fitting is checked against the approved drawing before packing

Quality Control

What Is Checked Before Packing

Checked against the approved drawing before packing
Dimensions verified against the signed specification
Finish and colour checked across the item
The lamp holder and light source are checked against the specification recorded for this model

Comparison

How It Compares With The Alternatives

Alternative	Honest trade off
Floor lamp with a wall switch	Foot switch allows hands-free control, wall switch requires reaching up or bending down
Floor lamp with a glass or ceramic shade	Linen shade diffuses light softly, glass or ceramic shades can reflect light unevenly

Use Guide

Before and After Installation

Measure floor to ceiling and confirm the drop before ordering rather than cutting on site
Allow a lowest point clear of head height where the fitting hangs over a walkway
Use dimmable E27 LED lamps if the room is used both in daylight and in the evening
Keep the fitting to dry interiors, it is rated IP20 and is not for bathrooms or outdoors
Clean the linen shade with a soft dry cloth, not with solvent or an abrasive cleaner

Questions Buyers Ask

Fishman Floor Light Questions

Can you change the height to fit our space?

Yes. Custom size is available on this model. Send us the floor to ceiling height and the height you want the lowest point to sit at, and the fitting is re-drawn before production.

Will the marble base match the sample we approve?

Black marble is a natural stone, so variation in colour and texture is expected between blocks. The base is selected to match the sample, but a later order will not be identical to an earlier one.

What lamps does it take and are they included?

It uses an E27 lamp, up to 60W. Confirm at order stage whether you want lamps supplied or whether you are lamping on site.

Can we have it in another finish instead of chrome?

Yes. Chrome is the standard finish on this model and other finishes are available. Send the reference to confirm availability.

Is it suitable for a bathroom or a covered terrace?

No. This fitting is rated IP20, which is for dry indoor use. Ask us for an alternative if the location is damp or exposed.

We are working to an interior designer's drawing, can you build to it?

Yes. Customised products are made to your approved drawings. Send the drawing and our engineer team will come back with a production drawing for you to sign off.