A11 Planet alabaster pendant light with thirteen stone spheres on a gold frame

A11 Planet alabaster pendant light photographed lit against a black background

Model JD2028GL-13D

A11 Planet Alabaster Pendant Light-13D

A11 is a 13-light alabaster pendant built around thirteen stone spheres on a gold metal frame, 907 mm across and 1200 mm from ceiling plate to lowest point. Each sphere is cut from natural alabaster, so the fitting glows warm and uneven rather than flat like an opal glass shade. It is specified for double-height entrances, stair voids and lounge ceilings where the fitting is read as an object during the day and as a light source at night. Model number is JD2028GL-13D.

Width907mm
O/A Height1200mm
MaterialMetal + Alabaster shade
FinishGold
Light SourceG9 LED bulb
Ingress ProtectionIP20

Request A Quote Email This Model

Custom size and finish are quoted against your drawing. Send the ceiling height or room dimension with your enquiry.

Key Benefits

What This Model Gives You

Thirteen G9 LED positions spread light across a wide void instead of one hot pool
Natural alabaster diffuses light without the plastic look of moulded acrylic shades
907 mm diameter fills a double-height entrance without a second fitting
45.5W total load keeps a feature fitting inside a tight lighting energy budget
Gold finish is factory applied so site touch-up is not needed after installation
Overall drop can be re-cut to your ceiling height before production starts

Problems It Solves

What Goes Wrong Without It

A single-lamp pendant looks undersized in a double-height void and leaves the upper wall dark
Moulded acrylic and opal glass shades read as plastic at close range in a lobby
Standard catalogue drops rarely match an actual ceiling height so the fitting hangs wrong
Multiple small pendants over one void mean more ceiling penetrations and more alignment risk

Specification

Recorded Specification

Width	907mm
O/A Height	1200mm
Material	Metal + Alabaster shade
Finish	Gold
Light Source	G9 LED bulb
Wattage	45.5W
Ingress Protection	IP20
Finish option	Chrome \| Gold \| others

Recorded notes

Custom size available
Alabaster is A Natural Stone
Variations in color and Texture Are Expected

Materials

Natural alabaster for the thirteen spheres, colour and vein vary between blocks
Metal frame and ceiling plate carrying the spheres and the lamp holders
Gold finish as standard, with chrome and other finishes available to order

Technical Features

Thirteen alabaster spheres carried on a metal frame in a gold finish
G9 LED lamp source, 45.5W total across the fitting
IP20 rating for dry indoor interiors
907 mm overall width with a 1200 mm overall height as standard
Custom overall height available so the drop suits the ceiling
Finish can be supplied in chrome, gold or another finish on request

Where It Goes

Application Scenarios

Typical Locations

Hotel lobby double-height entrance where the fitting is seen from two floors
Stair void in a villa read from the landing and from the ground floor
Residential building lift lobby that needs one fitting rather than a downlight grid
Showroom ceiling where the light itself is part of the display
Private dining room with a raised ceiling and a long table below

Who It Is For

Hotel FF&E buyers specifying feature lighting for public areas
Interior contractors fitting out villas and high-end apartments
Lighting wholesalers building an alabaster range for their catalogue
Developers standardising lift lobby lighting across a residential block

In Place

Fittings Of This Type On Site

Jedaz fittings installed on site — Jedaz fittings of this type photographed in place

Customisation

What Can Be Changed

Custom overall height and drop to match the ceiling
Custom overall width where the void is larger or smaller than 907 mm
Finish in chrome, gold or another finish on request
Production to your own approved drawing if you are working to an interior design package

How An Order Runs

You send a drawing or the ceiling height and the fitting is re-drawn to suit
Drawings are returned for your written approval before anything is cut
Alabaster blocks are cut and matched so the spheres read as one set
The frame is fabricated and finished, then the spheres and lamp holders are fitted
The fitting is assembled and lamped up before packing

Quality Control

What Is Checked Before Packing

A QC team checks the fitting against the approved drawing before it is packed
Alabaster spheres are matched for tone across the fitting rather than picked at random
The lamp holder and light source are checked against the specification recorded for this model
Dimensions are checked against the specification you signed off

Comparison

How It Compares With The Alternatives

Alternative	Honest trade off
Opal glass sphere pendant	Glass is consistent and cheaper, alabaster carries real vein and depth but every fitting varies slightly
Crystal chandelier of similar width	Crystal throws sparkle and reflections, alabaster gives a softer even glow and collects less dust
Cluster of single-sphere pendants	A cluster gives you layout freedom, one A11 gives you one ceiling point and one aligned object

Use Guide

Before and After Installation

Measure floor to ceiling and confirm the drop before ordering rather than cutting on site
Allow a lowest point clear of head height where the fitting hangs over a walkway
Use dimmable G9 LED lamps if the room is used both in daylight and in the evening
Keep the fitting to dry interiors, it is rated IP20 and is not for bathrooms or outdoors
Clean the alabaster with a dry soft cloth, not with solvent or an abrasive cleaner

Questions Buyers Ask

Planet Alabaster Pendant Light-13D Questions

Can you change the drop to fit our ceiling height?

Yes. Custom size is available on this model. Send us the floor to ceiling height and the height you want the lowest point to sit at, and the fitting is re-drawn before production.

Will the alabaster match the sample we approve?

Alabaster is a natural stone, so variation in colour and texture is expected between blocks. Spheres are matched within one fitting, but a later order will not be identical to an earlier one.

What lamps does it take and are they included?

It uses G9 LED lamps, 45.5W in total across the thirteen positions. Confirm at order stage whether you want lamps supplied or whether you are lamping on site.

Can we have it in chrome instead of gold?

Yes. Gold is the standard finish on this model and chrome is available. Other finishes can be quoted if you send the reference.

Is it suitable for a bathroom or a covered terrace?

No. This fitting is rated IP20, which is for dry indoor use. Ask us for an alternative if the location is damp or exposed.

We are working to an interior designer's drawing, can you build to it?

Yes. Customised products are made to your approved drawings. Send the drawing and our engineer team will come back with a production drawing for you to sign off.