Door Stopper
Door Stopper — manufactured by Huanhai Hardware and Tools Factory, Yiwu, China.
Model HHDS09
Door Stopper
Door Stop Alarm Security Wedge, 120 dB Portable Siren Door Stopper Safety System Device Kit for Safety Travelling Garage Home Apartments Hotels Shops
- ModelHHDS09
- CategoryDoor Stopper
- ManufacturerHuanhai Hardware and Tools Factory, Yiwu, Zhejiang, China
- Production basisOEM and own-brand production since 1998
- CustomisationProduced to customer requirement — mould design in house
- Quantity and lead timeQuoted per order
Drawings and sample photographs can be attached to your email. There is no enquiry form on this site — you reach Frank-loong directly at [email protected] or +86-15868960536.
Overview
What This Product Is
Door Stop Alarm Security Wedge, 120 dB Portable Siren Door Stopper Safety System Device Kit for Safety Travelling Garage Home Apartments Hotels Shops
The HHDS series covers the full door stop range: half-moon and oval floor stoppers with rubber buffers, wall mounted cylinder stops, magnetic catch stoppers, stone-topped weighted stops and rubber and plastic wedges.
It is produced by Huanhai Hardware and Tools Factory, founded in 1998, which has manufactured mainly for customers in Europe, America and Japan on an OEM basis.
Who It Is For
- Door hardware and architectural ironmongery distributors
- DIY and hardware retailers
- Hotel, office and property fit-out contractors
- Houseware and general merchandise importers
Problems It Solves
Why Buyers Specify This Line
- A door handle swinging into plaster damages the wall
- Doors in a draught need to be held open safely
- Fixed stops cannot be used where the floor cannot be drilled
- Architectural hardware has to match the finish family of the handles
Product Detail
Detail and Specification From The Factory
Content and images as published by the factory for this model.
- Door Stop Alarm Security Wedge : A portable safety protector for home or travel, as a door stop alarm and door stopper. When turn down the ON/OFF, the door stop alarm will prevent the door sliding; when turn on the ON/OFF, the door stop alarm will be a alarm device.
- Door Stop Alarm Security Wedge : NO installation required, Simply place the alarm behind any door(home, hotel, shop, apartment, etc). When the door the door is pushed open, the alarm definitely scare someone away with a very loud shrill(120db alarm).
- Door Stop Alarm Security Wedge : With high quality stainless steel cover and high damping rubber bearing, the wedge design suit for almost the height of the door between 1-3cm(0.4''-1.9'').
- The alarm have 3 level of sensitivities: High-Medium-Low sensitivities, with an adjustable sensitivity switch on the side. Powered by 9V battery(not include), it will last for a long time to use.
- Simply place the alarm behind any door, very convenient to take with you when travel or stay indoor alone. A really must have around you.
-
Dimensions, materials, finish and packing that are not shown above are confirmed in writing before an order is placed.
Manufacturing and Quality
How It Is Made
What the factory states about its production capability.
Mould and Tooling
The company states that with the strong ability of its mould design it can produce all kinds of hardware and produce according to customers' requirements. A mould factory sits inside the group.
Production
The factory states it is equipped with advanced machines to ensure quality and efficiency across its hardware and tool programmes.
OEM Programme Control
Production has run on an OEM basis since 1998 for customers in Europe, America and Japan, including Hawk, Benson, Ok cycle, Millarco, Powerfix, HaussMann and wolfcraft.
Export and Shipment
Yiwu Huanhai Import and Export Co., Ltd. was established by the factory as its own export arm to become more competitive and lower cost.
Certifications, test reports and inspection documentation are confirmed per programme with the sales manager. This site publishes only what the factory has stated.
Customisation
What Can Be Changed On This Item
Specification
Produced according to customer requirements — send a drawing, sample or written specification.
Branding and Packing
Agreed per order as part of the OEM programme. Confirm requirements with the sales manager.
Set and Content
Where the item is a kit or set, contents are assembled to the buyer's list.
New Tooling
New parts are possible through the group's own mould factory. Send the drawing to start the review.
Related Products
Other Models In Door Stopper
Related Reading
Applications and Guides
Application
DIY and Hardware Retail
Door stoppers, garage utility hooks and general hardware lines for DIY chains, discounters and hardware distributors.
Read more →Comparison
Choosing a Door Stopper
Floor mounted, wall mounted, magnetic and wedge door stops compared by fixing, finish and application.
Read the guide →Download Center
Catalogues and Documents
Download the Bike Related Products catalogue as a PDF, or request product data for this item by email.
Open downloads →FAQ
Door Stopper FAQ
What is the model reference for this product
The factory reference for this item is HHDS09. Quote that code in your enquiry and the sales manager can identify it immediately.
Can this be produced under our own brand
Yes. Huanhai Hardware and Tools Factory has manufactured on an OEM basis since 1998 for customers in Europe, America and Japan, including work for Hawk, Benson, Ok cycle, Millarco, Powerfix, HaussMann and wolfcraft. Send your branding and packaging requirement to [email protected].
Can the specification be changed
The company states that with the strength of its mould design capability it can produce all kinds of hardware and produce according to customers' requirements. Send a drawing, a sample photograph or a written specification and we will confirm what is feasible for this item.
What are the price minimum order quantity and lead time
These depend on the specification, quantity and packing for your programme, so they are quoted per order rather than published. Email [email protected] or call Frank-loong on +86-15868960536 with your quantity and target market.
How do I request a sample
Email [email protected] with the model code HHDS09 and your shipping address. Sample terms are confirmed by the sales manager.
Where is this product made and can we visit
It is made at the factory in Yiwu City, Zhejiang Province, China — about 1 hour from Hangzhou Airport and 3 hours from Shanghai. Buyers are welcome to visit; contact Frank-loong to arrange it.
Next Step
Request a Quotation for Door Stopper
Quote model HHDS09 with your quantity and target market and Frank-loong will come back with price, lead time and packing.
No enquiry form — write to [email protected] or call +86-15868960536 and reach Frank-loong directly. Drawings, sample photos and content lists can be sent by email.