
Solar Panel Long Side Mounts (530 mm)
Solar Panel Long Side Mount 530 mm White
The white 530 mm spoiler pair — 2.1 kg for the set and the long-edge bracket used in the BS090018 kit.
- No roof penetration — the mount is bonded to the surface, so there is nothing to seal and nothing to leak
- Acts as a wind deflector and keeps the correct air gap under the module for aeration
- UV-resistant ABS that will not chalk or crack in service
- 100 % recyclable and roughly 50 % lighter than an equivalent metal fixing
Product overview
What It Is and What It Does
The white 530 mm spoiler set: two universal long-side mounts for any aluminium framed panel with a 530 mm lateral length. The whole set weighs 2.1 kg, which is the number that usually decides the argument on a vehicle — you are adding almost nothing to the roof to get a full-length bonded fixing.
Like the rest of the ABS range it bonds rather than bolts, works as a wind deflector, and holds the panel clear of the roof so air can move underneath. It combines with the BS09009 corner moulds and the BS09017 180 mm panel mounts, and it is the long side bracket supplied in the BS090018-Kits caravan kit.
Who it is for
- Caravan and motorhome builders standardising on white roof hardware
- Fleet operators fitting the same panel across many identical vehicles
- Marine fitters working on white decks and coachroofs
- Kit buyers who need a matching replacement long-side bracket
Problems it solves
- Heavy metal rail systems add weight high up on a vehicle where it is least welcome
- Black hardware on a white roof is visible from every angle at a campsite
- Corner-only fixings leave the long edges of a big panel unsupported
- Drilled fixings make a roof warranty conversation harder than it needs to be
Key benefits and features
Why Buyers Choose BS090018-W
Benefits
- No roof penetration — the mount is bonded to the surface, so there is nothing to seal and nothing to leak
- Acts as a wind deflector and keeps the correct air gap under the module for aeration
- UV-resistant ABS that will not chalk or crack in service
- 100 % recyclable and roughly 50 % lighter than an equivalent metal fixing
- Just 2.1 kg for the complete set of two profiles
Technical features
- Material: ABS plastic, white, environmentally friendly and UV resistant
- Set of 2 long side spoiler mounts
- For aluminium-framed panels with a 530 mm lateral length
- 2.1 kg per set
- Combines with BS09009 corner moulds and BS09017 180 mm mounts
- Supplied as the long side bracket in the BS090018-Kits kit
| Product number | BS090018 |
|---|---|
| Colour | White |
| Material | ABS plastic |
| Set contents | 2 pcs per set |
| Lateral length | 530 mm |
| Set weight | 2.1 kg |
| Packing | 2 pcs per set, 16 sets per outer carton |
| Combines with | BS09009 corner moulds and BS09017 180 mm mounts |
| Fixing method | Adhesive bonded, no drilling |
| UV resistance | UV resistant |
Materials and manufacture
What It Is Made From
White UV-resistant ABS, environment friendly and recyclable. The material choice is what makes a 530 mm profile weigh what it does — 2.1 kg for the pair, against several times that for an equivalent length of aluminium rail and its brackets.
Quality and certification
Everything in the BS090018-W table above is taken from our own product documentation — 2 pcs per set and a 530 mm lateral length. Nothing on this page is estimated or rounded up to make a better headline. If a tender needs a written certification or test statement, tell us which standard it names and we will say what we can supply.
Customisation
BS090018-W is the white version, and BS090018-B is the same part in black. The standard export pack is 2 pcs per set, 16 sets per outer carton. For a different pack quantity, a printed carton, or long side mounts under your own label, tell us the annual volume you are planning and we will come back on what is possible and what it changes on price.
Comparison
How It Compares
Against the black BS090018-B
Same profile, same length, same packing. Colour choice only.
Against the 180 mm white mount
Different edges of the same panel. Most large-module installs use both plus the corner moulds.
Against the BS090018-Kits kit
The kit boxes this bracket together with four white corner brackets, so one part number covers a whole panel.
Use guide
How to Fit It
Step 1
Mark the long-edge bracket runs with the panel in position.
Step 2
Degrease the bonding faces.
Step 3
Apply adhesive sealant along the full length of each profile base.
Step 4
Bed down, seat the panel edges and check the air gap is even.
Step 5
Cure fully before the vehicle is driven.
Questions
Frequently Asked Questions
How heavy is a set?
2.1 kg for the pair of 530 mm profiles.
Can this be combined with other mounts in the range?
Yes. The 530 mm mount is designed to be used in conjunction with the BS09009 corner moulds and the BS09017 180 mm panel mounts.
Is this the bracket used in the kits?
The BS090018-Kits kit contains four white corner brackets and one set of 530 mm long white side brackets — this part.
Does it need drilling?
No. It is an adhesive-bonded fixing, which is the whole reason for the ABS range.
Further reading
Notes and Guides for This Product

Two Panels on a Caravan Roof Without Drilling
A caravan owner planned to DIY-install two 80 watt polycrystalline panels on the roof of a 21 ft 6 in van. The question raised on…

Waterproof Roof Cable Entry on a Camper
When the cable assembly of solar panels on the roof of a camper is run, the practical route is to bring the cable through the…

No Drill Adhesive Mounting for Caravan Roofs
The reasoning behind the ABS range, and what changed when white was added.

ABS Plastic Versus Aluminium Solar Mounts
Two mounting families, one decision: can this surface take a fastener or not?
Ready to Order BS090018-W
Tell us how many BS090018-W you need and which port they are going to. We will confirm against the standard pack of 2 pcs per set, 16 sets per outer carton, quote freight and give you a lead time.


