
Aluminium Solar Bracket 6 Pack
Six anodised aluminium feet with 316 stainless screws, for larger panels that need mid-rail support.
- Six feet — the correct count for a larger rectangular module
- Factory anodised aluminium with 316 stainless screws
- Predrilled and ready to fix
- Simple fixed mounting with nothing to adjust or maintain
Product overview
What It Is and What It Does
A set of six bracket type mounting feet, otherwise identical to the four pack: universal fit on any solar electric panel with a standard aluminium frame, hardware included for fastening the mounts to the panel, each bracket 100 mm long by 60 mm wide and 60 mm high, factory anodised, predrilled and supplied with 316 stainless screws.
Six feet is the count for a larger rectangular module — one pair at each end and one pair in the middle of the frame rail. These mounting feet are good for mounting single or a small number of panels on an RV, cabin roof, or anywhere else where you want to keep it simple and do not need to adjust or tilt them.
Who it is for
- RV and motorhome owners fitting larger rectangular modules
- Cabin and outbuilding installations with one or two panels
- Installers who want the mid-rail support that four feet cannot give
- Distributors stocking both pack sizes for different module formats
Problems it solves
- A long module supported only at its ends flexes in the middle under wind load
- Buying two four-packs to get six feet leaves two spares and a mismatched invoice
- Non-marine fasteners fail first on any coastal or winter-road installation
- Tilt hardware adds cost and failure points on installations nobody will adjust
Key benefits and features
Why Buyers Choose BS09003-S
Benefits
- Six feet — the correct count for a larger rectangular module
- Factory anodised aluminium with 316 stainless screws
- Predrilled and ready to fix
- Simple fixed mounting with nothing to adjust or maintain
Technical features
- Set of 6 bracket type mounting feet
- Each bracket 100 mm long × 60 mm wide × 60 mm high
- Factory anodised aluminium
- Predrilled, supplied with 316 stainless screws
- Universal fit on standard aluminium panel frames
- Packaged in a cardboard box
| Product number | BS09003-S |
|---|---|
| Product name | RV Solar Panel Mount |
| Manufacturer | Bright Solar Power |
| Set contents | 6 mounting feet |
| Bracket dimensions | 100 mm long × 60 mm wide × 60 mm high |
| Material | Factory anodised aluminium |
| Screws | 316 stainless steel |
| Pre-drilled | Yes |
| Panel compatibility | Any solar electric panel with a standard aluminium frame |
| Packaging | Cardboard box |
Materials and manufacture
What It Is Made From
The same factory-anodised aluminium and 316 stainless hardware as the four pack. The only difference between the two part numbers is the count in the box.
Quality and certification
Everything in the BS09003-S table above is taken from our own product documentation — 6 mounting feet and brackets at 100 mm long × 60 mm wide × 60 mm high. Nothing on this page is estimated or rounded up to make a better headline. If a tender needs a written certification or test statement, tell us which standard it names and we will say what we can supply.
Customisation
For a different pack quantity, a printed carton, or l-feet brackets under your own label, tell us the annual volume you are planning and we will come back on what is possible and what it changes on price.
Comparison
How It Compares
Against the 4 pack
Four feet for a small or square module, six for a larger rectangular one. Six gives you mid-rail support that four cannot.
Against Z feet by the piece
Z feet are sold to the count you need and step the panel further off the roof. The L foot is lower and packs more simply.
Against an adjustable mount
These do not tilt. That is the point — nothing to adjust, nothing to work loose on the road.
Use guide
How to Fit It
Step 1
Plan the layout: one pair at each end, one pair at the middle of the frame rail.
Step 2
Fasten the six feet to the panel frame.
Step 3
Mark, drill and seal each roof fixing position.
Step 4
Fix with the 316 stainless screws, sealing under every foot.
Step 5
Tighten evenly so the frame is not twisted by an uneven roof.
Questions
Frequently Asked Questions
Why would I need six instead of four?
Larger rectangular modules need support in the middle of the frame rail as well as at the ends. Six feet gives you that.
Are the brackets the same as the 4 pack?
Yes — same 100 × 60 × 60 mm anodised bracket and the same 316 stainless screws. Only the pack quantity differs.
Can I tilt them?
No. These are fixed feet for installations where you do not need to adjust or tilt the panel.
What are they supplied in?
A cardboard box.
Further reading
Notes and Guides for This Product

RV Roof Mounting for Highway Wind Loads
Mounting solar panels to an RV roof is not a static engineering problem. The vehicle moves, and the array has to survive the…

Sizing a Solar Panel for an RV
Count the loads first, then pick the module — not the other way round.

ABS Plastic Versus Aluminium Solar Mounts
Two mounting families, one decision: can this surface take a fastener or not?
Ready to Order BS09003-S
Tell us how many BS09003-S you need and which port they are going to. We will confirm the pack quantity for the Aluminium Solar Bracket 6 Pack, quote freight and give you a lead time.



