Metal Stamping Parts
Decorative Perforated Metal Sheet
Perforated metal sheet is flat sheet stamped with a repeating pattern of holes, used where a surface has to pass air, light or sound while still carrying load or hiding what is behind it. Sheets are produced in aluminium, stainless steel and brass, with the hole shape, size, spacing and pattern set by the project.
- Aluminium
- Stainless steel
- Brass
Product Overview
Perforated metal sheet is flat sheet stamped with a repeating pattern of holes, used where a surface has to pass air, light or sound while still carrying load or hiding what is behind it. Sheets are produced in aluminium, stainless steel and brass, with the hole shape, size, spacing and pattern set by the project. Both OEM production from your drawing and ODM development from a described requirement are accepted.
Key Benefits
- Hole pattern designed for the job rather than chosen from a fixed stock range
- Aluminium, stainless steel and brass so the sheet suits indoor or exposed use
- One process gives ventilation, screening and appearance at the same time
- OEM and ODM both accepted, so a described idea can still be quoted
- Sheets inspected before dispatch against the agreed pattern
Problems It Solves
- Standard perforation patterns that do not give the open area the design needs
- Guards that block airflow and cause equipment to run hot
- Panels that need both a decorative face and structural stiffness
- Sheet bought cut to size then perforated elsewhere, with alignment problems
Where It Is Used
Applications And Buyers
Application Scenarios
- Decorative facade and interior cladding panels
- Ventilation panels and machine guards that must pass air
- Speaker grilles and equipment covers
- Screens and partitions where sightlines must be broken without blocking light
Who It Is For
- Architectural metalwork fabricators
- Machine builders needing guards with airflow
- Interior fit out contractors
- Equipment manufacturers specifying grilles and covers
Technical Features And Specifications
Technical Features
- Mechanically stamped hole pattern
- Hole shape, size and spacing to the project requirement
- Aluminium, stainless steel and brass
- Stamping and CNC processes on the same part
- OEM and ODM project support
| Process | Stamping and CNC perforation |
|---|---|
| Materials | Aluminium, stainless steel, brass |
| Pattern | Hole shape, size and spacing to specification |
| Project Types | OEM and ODM |
| Typical Use | Decorative panels, ventilation, screening, guards |
How It Is Made And Checked
Materials Process And Quality Control
Materials
- Aluminium
- Stainless steel
- Brass
Manufacturing Process
- Stamping
- CNC perforation
- Sheet metal forming
Quality Control
- Specification agreed in writing before production starts
- First article or sample approved against the agreed specification
- Goods inspected and photographed at the factory before loading
- Inspection report sent to you before the container sails
Customisation Options
What Can Be Varied
- Hole shape, diameter and pitch to your design
- Open area percentage set to the ventilation requirement
- Material and thickness by exposure and load
- Edge margins and blank borders for fixing
- Forming and finishing of the perforated panel
Compared With The Alternatives
| Expanded metal mesh | Expanded mesh is cheaper and stronger for its weight; perforated sheet gives a flat face and a controlled, repeatable pattern, which is what decorative work needs. |
|---|---|
| Woven wire mesh | Wire mesh gives very high open area; perforated sheet is rigid enough to be used as a panel without a frame. |
Use Guide
- Decide the open area percentage before the hole size, since that is what drives airflow and sightlines
- Leave an unperforated margin where the panel will be fixed or folded
- Allow for the panel curling slightly during perforation on thin material
- Specify the finish direction if the pattern must align across several panels
Questions
Questions Buyers Ask About This Product
Can I specify my own hole pattern?
Yes. Hole shape, size and spacing are set per project, under OEM or ODM arrangements.
Which materials are available?
Aluminium, stainless steel and brass among others.
Can the sheets be formed after perforation?
Yes, but the fold line should fall in an unperforated margin. Tell us the forming requirement at drawing stage.
Is there a minimum order?
Quantities are quoted per project. Send the panel size, pattern and quantity for a firm figure.
How is quality checked?
Sheets are inspected against the agreed pattern and dimensions before dispatch.
Related Products
Others In Metal Stamping Parts
Metal Stamping PartsCNC Punching Parts
Custom CNC punched parts produced from a design, punched on CNC equipment and quality checked before dispatch. The…
View Product
Metal Stamping PartsDeep Drawn Components
Deep drawn parts formed by radially drawing a sheet metal blank into a forming die, turning flat material into a…
View Product
Metal Stamping PartsCNC Bending Parts
CNC bending forms metal on computer controlled machines, giving accuracy and repeatability that hand setting cannot…
View ProductFurther Reading
Guides And Industries That Cover This
Get A Price For Decorative Perforated Metal Sheet
Send the duty figures, the material if it is fixed, and the quantity. We will confirm the specification and quote against it.