Rubber Seals & O-Rings
O-rings and seals in NBR, HNBR, EPDM, FKM and FFKM compounds.
Rubber & Sealing Components
Every Rubber Seals & O-Rings We Supply
Rubber Seals & O-RingsY Seals & Y O-Rings
Y seals and Y O-rings covering the standard hole and shaft universal type commonly called the Y-ring, plus…
View Product
Rubber Seals & O-RingsO-Rings
O-rings in nitrile, EPDM, silicone and other compounds, supplied for hydraulic systems where they prevent fluid…
View Product
Rubber Seals & O-RingsNBR O-Rings
O-rings in NBR, a nitrile compound with good oil resistance. NBR is the standard choice wherever a seal meets mineral…
View Product
Rubber Seals & O-RingsHNBR O-Rings & Seals
Seals and O-rings in HNBR, a hydrogenated nitrile compound. HNBR is used predominantly for cold medium sealing, where…
View Product
Rubber Seals & O-RingsFKM & FFKM O-Rings
O-rings in FKM fluoroelastomer and FFKM perfluoroelastomer. FKM gives strong resistance across a wide range of…
View Product
Rubber Seals & O-RingsFFKM Seals
Seals in FFKM perfluoroelastomer, supplied for industries where chemical attack and temperature would destroy a…
View Product
Rubber Seals & O-RingsFFKM O-Rings
O-rings in FFKM perfluoroelastomer, chosen where a seal has to resist a broad range of aggressive chemicals, solvents…
View Product
Rubber Seals & O-RingsEPDM Seals & O-Rings
Seals and O-rings in EPDM, ethylene propylene diene monomer, a compound with excellent heat, ozone and weather…
View Product
Rubber Seals & O-RingsAS568 O-Ring Series
The AS568 standard O-ring series, supplied from a complete set of moulds covering the AS568 size range, which means…
View ProductFit
Where This Category Earns Its Place
Who This Category Is For
- Hydraulic cylinder manufacturers
- Automotive component suppliers
- Hydraulic and pneumatic equipment manufacturers
- Water treatment and filtration system builders
- Automotive component manufacturers
- Hydraulic equipment builders
Problems It Solves
- O-rings used in dynamic applications where a lip seal is needed
- Seals failing early because the compound does not suit the fluid
- Seals swelling and failing in oil because the compound is wrong
- Nitrile seals hardening and leaking in cold conditions
- Seals degrading in aggressive chemicals and causing unplanned shutdowns
Typical Applications
- Sealing hydraulic cylinder rods and pistons
- Preventing fluid leakage in car parts and assemblies
- Preventing fluid leakage between connected parts in hydraulic systems
- Sealing air and preventing pressure loss in pneumatic systems
- Hydraulic and fuel system seals in vehicles
- Aerospace component sealing
How We Work
What You Get With The Equipment
Specification First
The duty is written down and agreed before any factory is approached, so offers can be compared on the same basis.
Built To Your Figures
Capacity, material grade and control level are set per order rather than chosen from a fixed model list.
Checked Before Loading
Goods are inspected and photographed at the factory, and the report reaches you before the container sails.
One Shipment
Items from this category ship together with the rest of your order on one set of documents.
Related
Where This Category Fits
Machinery & Equipment OEMs
Machined, stamped, fabricated and moulded parts made to your drawing in production volumes.
OEM Custom Manufacturing
Your drawing, our process route, the same part every batch.
Factory Sourcing & Quality Control
A buying office in Shanghai without opening one.
Choosing O-Ring Material NBR HNBR EPDM FKM Or FFKM
The compound is chosen by what the seal touches and how hot it gets, in that order.
Questions
Frequently Asked Questions
How many rubber seals & o-rings do you offer?
There are 9 products in this category on this site, and most are built to order rather than sold as fixed models. Send your duty and we will confirm the right one.
Can the specification be changed to suit our plant?
In most cases yes. Capacity, material and control level are normally set per order. The individual product pages state what can be varied.
What do you need from us to quote?
The duty figure that matters for the product, the material or grade if it is fixed by your process, and the quantity. For equipment that is usually capacity per hour; for parts it is a drawing.
Is a single unit order accepted?
For most equipment in this category the minimum order is one unit. Parts and components are quoted by quantity.
How are the goods checked before shipment?
They are inspected and photographed at the factory before the container is loaded, and the report is sent to you.
Get A Quotation For Rubber Seals & O-Rings
Tell us the duty, the product and the plant conditions. We will come back with a specification and a price, not a brochure.