ISUZU DMAX 4JH1 Hand Brake Cable 8980070110
ISUZU DMAX 4JH1 Hand Brake Cable 8980070110 is supplied against OEM reference 8980070110 for ISUZU DMAX.
Hand Brake Cable for ISUZU DMAX
ISUZU DMAX 4JH1 Hand Brake Cable 8980070110 is supplied against OEM reference 8980070110 for ISUZU DMAX. The hand brake cable carries the lever force to the rear brakes mechanically, and because it runs under the vehicle it corrodes and stretches long before the brake itself wears out. Long-term use of the hand brake will cause plastic deformation of the steel wire (this deformation is irreversible). Our Hand Brake Cable is made of high-quality materials, with stable performance and long service life. The minimum order is one piece, packed neutral or under your own brand, with ISO9001 certification.
- OEM 8980070110
- Category: Chassis System Parts
- ISO9001
- MOQ 1 piece
What You Get With This Reference
- Listed against OEM reference 8980070110 so the part is confirmed before it is packed
- Restores hand brake holding force instead of over-adjusting a stretched cable
- Ordered in workshop quantities for a fleet
Why Buyers Order It
- Cable lengths differ between wheelbase and drive configurations of the same pickup
- A seized cable fails a safety inspection even when the brakes are good
- Cheap cables corrode within a season in coastal and wet markets
- Finding this reference for ISUZU DMAX locally often means a long wait or a used part of unknown history.
Where This Part Is Used and Who Buys It
Application Scenarios
- Safety inspection repair on a pickup
- Fleet maintenance in a wet or coastal market
- Workshop shelf stock
Who It Is For
- Fleet workshops maintaining ISUZU DMAX
- Truck repair shops handling clutch, brake and steering work
- Aftermarket parts distributors building a pickup and light truck range
- Traders consolidating mixed parts orders from Yiwu
Technical Data From the Product Record
| OEM No. | 8980070110 |
|---|---|
| Size | 590mm*400mm*1mm |
| Engine Model | 4JH1 |
| Matched Model | ISUZU DMAX |
| Place of Origin | China |
| MOQ | 1 Pc |
| Certification | ISO9001 |
| Packing | Neutral or custom packaging |
Only values recorded against this reference are listed. Send the number from your old part if you need a dimension that is not shown.
What the Part Is Built To Do
- Inner cable running in a sealed outer
- End fittings to the OEM pattern
- Length matched to the listed model
- Individually packed
- Engine Model: 4JH1
- Size: 590mm*400mm*1mm
Symptoms That Point Here
- Long lever travel that returns after each adjustment
- Hand brake holding on one wheel only
- Cable seized after wet season use
- Frayed strands visible at the adjuster
How It Compares With the Alternatives
Compared with over-adjusting a stretched cable
Taking up stretch at the adjuster leaves the brake partly applied and drags the shoes.
Compared with a universal cable
Length and end fittings rarely match, and a badly routed cable chafes through.
Fitting and Service Notes
- Check the rear shoes and the drum adjustment before blaming the cable.
- Route the new cable through the original clips and guides so it does not chafe.
- Lubricate the cable ends and set travel at the lever to the manual figure.
- Re-check travel after the shoes have bedded in.
Parts Usually Ordered With It
ISUZU DMAX 4X2 Rear Brake Shoes 8973026350
View details →
HINO Clutch Disc 31250-37170 TYD149U 31250-36521
View details →
MERCEDES BENZ Clutch Disc 1878001747
View details →
ISUZU FSR 6HH1 6BG1 Clutch Pressure Plate 1312203640 1312201580 ISC523 1312204470 1312203591 1312201820
View details →Guides for This Kind of Job
How To Read and Verify an OEM Number Before You Order
Most wrong-part shipments start with an order placed on a vehicle name. This guide shows where the number is, how to read it and what to send a supplier.
Read →Product GuideChoosing Brake Pads and Shoes for Commuter and Delivery Motorcycles
Why the caliper, the load and the climate matter more than the price per set when a bike works every day.
Read →ChecklistA Parts Checklist for a Light Truck Diesel Engine Rebuild
The references a workshop should have on the bench before an engine comes apart, so the job is not held up halfway.
Read → IndustryTruck and Pickup Fleet Workshops
A fleet workshop is measured on how quickly a vehicle returns to work, so parts availability matters more than list price.
Read →Questions About ISUZU DMAX 4JH1 Hand Brake Cable 8980070110
Which vehicles does 8980070110 fit?
Which models does this cable fit?
Is it the front or rear section?
Can I order several for fleet stock?
What is the minimum order and how is it packed?
Need This Part Confirmed For Your Vehicle
Send the OEM number, the engine code or a photograph of the old part. The reference and the matched models are confirmed in writing before you pay anything.