Automatic Touchless Soap Dispenser for Kitchen Bathroom
A 300ml battery-powered soap dispenser that activates with a hand at 5cm or more, releasing 1ml of liquid in 0.26 seconds without any button press. The ABS body features an electroplated silver finish, a curved neck that sheds moisture, and a rubber base to keep the battery compartment dry.
- MOQ
- Usually 200 to 1000 pcs
- Customisation
- Logo, colour, packaging and labelling
- Payment
- 30% deposit, balance before shipment (T/T)
- Inspection
- Every order inspected before shipment
Product Overview
A 300ml battery-powered soap dispenser that activates with a hand at 5cm or more, releasing 1ml of liquid in 0.26 seconds without any button press. The ABS body features an electroplated silver finish, a curved neck that sheds moisture, and a rubber base to keep the battery compartment dry. For a buyer, it fits the mid-price hygiene category where hotels, offices, and retail sets sell well.
Why Buyers Choose It
Key Benefits
- Hands-free operation removes the shared touch point that buyers of hygiene products are most often asked about
- 1ml per activation controls liquid use, which reduces refill costs across multiple units
- No installation or wiring needed, so rollouts in hotels and offices can proceed without contractors
- IPX6-rated body and rubber base prevent splash water from entering the battery compartment
- Electroplated silver ABS surface holds up well in retail photos and marketplace listings
- Flat, uninterrupted front panel provides a clean area for logo printing
Problems It Solves
- Manual pumps become the dirtiest object in a washroom and are flagged in hygiene audits
- Over-dispensing wastes soap and inflates consumable cost across large sites
- Wall-mounted dispensers require drilling and a contractor, which delays rollouts
- Water entering the battery box on cheap units causes corrosion within months
- Generic white plastic units look out of place on shelf against branded hygiene ranges
Where It Is Used
Who It Is For
- Promotional product distributors building a branded hygiene range
- Hotel and hospitality purchasing groups replacing manual pump bottles
- Housewares importers filling a mid-price bathroom category
- E-commerce sellers who need a listing-ready product with clean studio images
- Facility management suppliers quoting multi-site washroom refits
Application Scenarios
- Hotel guest bathrooms and staff wash stations in back-of-house areas
- Hospital and clinic corridors where staff must avoid touching pumps between patients
- Office pantries and shared kitchens in managed facilities
- Retail and e-commerce hygiene sets sold as boxed consumer products
- Restaurant and food-service handwash points behind the service line
- Corporate gifting and promotional programmes built around hygiene themes
Technical Detail
Specifications
| Capacity | 300ml / 10.15oz |
|---|---|
| Output Per Activation | 1ml |
| Response Time | 0.26 seconds |
| Sensing Distance | 5cm / 1.97 inch or more |
| Repeat Interval | 2 seconds in continuous use |
| Water Resistance | IPX6 |
| Power | 4 x AAA batteries, not included |
| Housing Material | ABS with electroplated finish |
| Finish | Smooth silver electroplate |
| MOQ | Varies by product, usually 200 to 1000 pcs, confirmed at quotation |
Values shown are the ones stated by the supplier. Anything not listed here is confirmed in writing when we quote.
Technical Features
- PIR sensor with built-in anti-infrared interference to reduce false triggering
- Activation distance of 5cm or more from the liquid outlet
- 0.26 second response and 1ml output per activation
- Continuous mode: hold the hand in place and the unit pumps again after 2 seconds
- Low-battery warning by flashing indicator light
- Curved neck geometry that drains moisture down the outer surface
- Rubber waterproof base isolating the battery compartment from splash water
- Compatible with hand soap, laundry detergent, shower gel, shampoo and detergent
Materials
- ABS housing, selected for impact resistance and a stable electroplated surface
- Electroplated silver coating on the outer shell
- Rubber base seal isolating the battery compartment from splash water
- Internal straw and nozzle assembly sized for viscous liquids such as shower gel
Make It Yours
Customisation Options
- Logo on the housing by silkscreen, offset printing, laser, engraving, stamping press or heat transfer
- Housing colour and finish changes subject to tooling and plating capability
- Manual and multilingual labelling supplied to your market requirement
- Battery and accessory inclusion decided per order
How It Is Made
- Injection moulding of the ABS shell and internal liquid channel
- Electroplating of the outer surface, then inspection for pinholes and orange peel
- Sensor board assembly and pairing with the pump module
- Logo decoration by silkscreen, heat transfer or laser depending on the artwork
- Function test: sensing distance, dose volume, repeat interval and low-battery indicator
- Retail or export carton packing with your artwork
Quality And Use
Quality Control
- Product details and a signed sample confirmed before mass production starts
- Production followed through moulding, plating and assembly rather than checked only at the end
- Every order inspected before shipment
- Function checks cover dose volume and sensing distance, the two failure modes buyers complain about
- Issues after receipt are handled directly with the sourcing contact who ran the order
Use Guide
- Install 4 AAA batteries, matching the + and - marks in the compartment
- Fill with soap, shower gel, shampoo or detergent; do not fill with alcohol, which attacks the surface colour
- Trigger the sensor two or three times on first use so the straw fills
- Hold a hand 5cm from the outlet; hold it in place for a second dose after 2 seconds
- If no liquid comes out, poke the nozzle by hand so the straw can draw air
- Replace the batteries when the indicator flashes, and remove them if the unit is stored unused
- Do not immerse, tilt or invert the unit, and keep it between 3C and 40C
How It Compares
| Compared with | Honest trade-off |
|---|---|
| Manual pump bottle | Costs more per unit and needs batteries, but removes the shared touch point and controls dose |
| Wall-mounted sensor dispenser | Lower capacity and needs refilling more often, but no drilling and no installation cost |
| Mains-powered dispenser | Requires 4 AAA batteries the end user must replace, but works anywhere without a socket |
| Plain white ABS unit | Higher tooling and plating cost, but an electroplated finish that holds up on shelf and in listing photos |
Questions About This Product
What is the minimum order quantity?
MOQ differs by product and usually falls between 200 and 1000 pcs. We confirm the exact figure with the factory when we quote.
Can we print our logo on the housing?
Yes. Silkscreen and heat transfer both work on this ABS shell; offset printing, laser, engraving and stamping press are available depending on the artwork.
Can we get a sample first?
Samples are free when the total sample value is under 5 US dollars and you have a DHL, UPS, TNT or FedEx account and cover the courier freight.
How does payment work?
30% deposit before mass production and the balance before shipment. T/T is our usual method; ask us if you need another arrangement.
Are batteries included?
No. The unit takes 4 AAA batteries and they are excluded by default. We can include them if your market allows battery shipment.
Is the unit waterproof enough for a wet washroom?
The body is rated IPX6 with a rubber base seal against splash water. It must not be immersed, tilted or inverted.
How is quality checked before it leaves China?
We confirm every detail against your approved sample before mass production, follow the run, and inspect each order before shipment.
Related Products
Household & LivingNoise Reduction BoothView details 
Household & LivingGold Fencing Related Key Rings&ChainsView details 
Household & LivingElectric ScissorsView details 
Household & LivingSinger Featherweight Sewing Machine CaseView details 
Household & Living304 Stainless Steel Oil FunnelView details 
Household & LivingLarge Capacity Wall-mounted Foldable Dirty Clothes BasketView details Before You Order
How MOQ Works When You Source From China
Why the minimum order quantity moves between 200 and 1000 pcs, what actually drives it, and how to bring it down without paying for it twice.
Logo Decoration Methods Compared
Silkscreen, offset, embroidery, laser, engraving, stamping press and heat transfer, and which substrate each one actually belongs on.
The Sample Process Explained
What a free sample covers, what it does not, and why the approved sample matters more than the specification email.
Quote this product
Tell us the quantity, the destination market and any customisation. We come back with a price and a sample plan.