Foam Pump 42/410–43/410
Foam pumps on 30/410, 40/400, 40/410, 42/410 and 43/410, delivering 0.4 cc or 0.8 cc of foam per stroke in PP.
- Neck finish
- Ø42/410 Ø43/410
- Material
- PP
Quote reference FP-06 in your message and we will know exactly which item you mean.
Overview
Product Overview
Foam Pump 42/410–43/410 is part of our foam pump range, moulded and assembled in our own factory near the Ningbo and Shanghai sea ports. It is produced for Ø42/410 Ø43/410 neck finishes, moulded in PP. Carton quantity, carton measurement and weight are published below so you can model freight before ordering.
Benefits
Key Benefits
- Two documented doses, 0.4 cc on 30/410 and 0.8 cc on the 40 mm series.
- Five neck finishes covering standard and wide neck bottles.
- Carton data published: 500 to 700 pieces per carton with carton size and weight.
- One supplier for the foaming pump, the closure and the foil products in the same shipment.
Where It Is Used
Application Scenarios
User Segments
Who It Is For
- Hand wash and foaming soap brands
- Facial cleanser and cosmetic fillers
- Kitchen and washroom cleaning brands
- Biomedicine and clinical hygiene packaging buyers
- Hotel amenity and dispenser refill programmes
Pain Points
Problems It Solves
- Foam quality varies when the mesh and air chamber are not matched to the dose.
- Large neck finishes such as 42/410 and 43/410 are hard to source with a matching bottle.
- A wide neck pump is quoted without a carton measurement, so the freight cost surprises the buyer.
- Small foaming doses for facial products are not available in the same family as the 0.8 cc hand wash pump.
Features
Technical Features
- Produced for Ø42/410 Ø43/410 neck finishes.
- Moulded in PP.
Data Sheet
Specifications
| Neck finish | Ø42/410 Ø43/410 |
|---|---|
| Material | PP |
| Colour shown in photograph | Black |
| Website reference | FP-06 |
| Category | Foam Pump |
Material
Materials
- Body and housing components are moulded in PP.
- PP is used across the range because it holds a living hinge, takes colour well and tolerates a wide range of household and personal care chemistry.
- Selected treatment pump versions are specified in AS where a clear rigid over-cap is part of the product appearance.
- Closure material options of ABS or aluminium are available on specified lotion and treatment pump versions.
Read the full material guide for the background.
How It Is Made
Manufacturing Process
Mould design, injection moulding, automatic assembly of piston, spring, mesh and air chamber, inspection, packing.
Quality
Quality Control
- Inspection is part of the automatic production line rather than a separate final step.
- We implement the ISO9001 quality system in the management of moulding, assembly and inspection.
- Mould design and steel manufacturing are in house, so a tooling correction is handled inside our own schedule.
- Samples are supplied for evaluation so you can verify fit and dose on your own bottle before a production order.
Certification
The quality system we operate is ISO9001. Where your market requires additional documentation for a specific application, tell us what is needed at enquiry stage and we will confirm what we can supply for this item rather than list certificates in advance.
Made To Your Brief
Customization Options
- Colour, set at the moulding stage and matched across a range of SKUs.
- Dip tube cut to the height and shoulder profile of your bottle.
- Closure style within the neck finish family, including ABS or aluminium on specified versions.
- Carton case count where your warehouse needs something other than our standard export packing.
How It Differs
Comparison With Other Items In This Range
| Item | Neck finish | Output per stroke | Material | Carton |
|---|---|---|---|---|
| FP-01 | Ø40/400 Ø40/410 | 0.8 cc | PP | 700 PCS/CTN |
| FP-03 | Ø30/410 | 0.4 cc | PP | 500 PCS/CTN |
| FP-04 | Ø42/410 Ø43/410 | — | PP | — |
Full range on the Foam Pump page. Reference codes identify each item exactly.
How To Use It
Use Guide
- Use a formula designed to foam. A standard lotion will not foam through a foam pump.
- Leave headspace in the bottle so air can reach the chamber.
- Prime with several full strokes before judging foam quality.
- Keep the bottle upright in use and in transit.
FAQ
FP-06 Questions
Which bottle neck does FP-06 fit?
What material is it moulded in?
Can I get a sample of this item?
What is the reference code used for?
Related Products
Related Foam Pump Items
Guides Solutions And Industries
Related Reading
Guides
Solutions
Industries
Next Step
Get A Price On FP-06
Send the reference, your quantity and your destination port. We can arrange a sample for evaluation on your own bottle before you commit to production.
+86 135 8670 9343 · [email protected] · Monday to Saturday, 08:30 – 18:00 China Standard Time (UTC+8)