2 Pin Brazil power cords
Brazil uses the NBR 14136 plug, a two-pin and three-pin round pattern issued in 10 A and 20 A versions. The two ratings use different pin diameters, so the plug has to be chosen against the appliance load before production starts.
| Model | YHB-1 |
|---|---|
| Rating | 10A 250V |
- 2.5A 250V
- H03VV-F 2X0.5mm2
- H03VVH2-F 2X0.5mm2
- H05VV-F 2X0.75--1.0mm2
- H05VVH2-F 2X0.75--1.0mm2
Cord length, cable gauge and type, jacket colour and the connector at the appliance end are set per order. Complete OEM services are available.
Who It Is For
- Exporters shipping appliances and electronics into Brazil
- Power supply and adaptor makers
- Distributors holding local replacement cords
- Brands consolidating a Latin American cord programme
Problems It Solves
- Correct 10 A or 20 A pin diameter for the socket the product will meet
- Two-pin and three-pin builds cover Class I and Class II products
- Cable gauge selected against the real current draw
- One supplier for Brazil alongside the rest of your international range
Where It Is Used
- Domestic appliances
- IT and consumer electronics
- Lighting products
- Power supplies and chargers
How It Is Made
The plug is moulded directly onto the cable on our own tooling, so there is no screw joint and no field wiring. The company runs first class producing equipment and advanced mould processing equipment, and quality control is applied at each stage rather than only at the end.
We mould both two-pin and three-pin Brazilian plugs onto flexible cable and terminate them with an IEC connector or prepared leads.
How we control qualityCustomisation Options
- Cord length to your drawing rather than a fixed catalogue length
- Cable gauge, conductor count and jacket type selected against the load and environment
- Jacket colour and printed marking on request
- Appliance end supplied as an IEC connector, a moulded outlet, ring terminals or stripped and tinned leads
- Retail or bulk packing, with your own artwork where required
Products are RoHS compliant and carry international approvals including UL, cUL, VDE, SAA, BSI, IMQ depending on the destination market. See the certificates.
2004
Exporting since
20+
International approvals
3–4 weeks
Delivery time
12 hours
Enquiry response
Related Products in Brazil Power Cords
Questions About Brazil Power Cords
What is the difference between the 10 A and 20 A plug?
Pin diameter. The 20 A plug has thicker pins and will not enter a 10 A socket, so the rating has to match the application.
Is a two-pin version available?
Yes, for Class II double-insulated appliances.
Can you fit a C13 connector?
Yes, along with C5, C7 and C15 options.
What cable do you use?
Flexible PVC cable is standard. Tell us the current rating and we will confirm the gauge.
Ask About 2 Pin Brazil power cords
Tell us the quantity, the cable and the length. A quotation follows within twelve hours.