ISO 9001 & BSCI audited factory · OEM/ODM since 2001 [email protected] +86 134 0579 7951
Pool grid EVA foam mat with open drainage grid
Product

Pool Grid EVA Foam Mat

Open-Grid Drainage Mats for Pool Surrounds Showers and Wet Rooms

Product Overview

What This Mat Is and Who It Is For

The Pool Grid EVA Foam Mat is an open-grid tile made for wet areas. Water falls straight through the grid instead of pooling on the surface, which is what keeps the walking area safe around a swimming pool, a shower block or a sauna.

The EVA body is resistant to water, mould and mildew, so the tile can be lifted, hosed down and put back rather than replaced at the end of a season.

  • Open-grid structure across the full tile
  • Interlocking edges for continuous runs along a pool surround
  • Closed-cell EVA - the foam itself does not absorb water
  • Mould and mildew resistant
Pool grid EVA foam mat with open drainage gridOpen grid EVA foam mat tile for wet areasNon-toxic pool grid EVA mat tileEco-friendly swimming pool grid matSwimming pool grid mat laid around a pool edge
Key Benefits

What the Buyer Gets

Open-grid design drains water quickly

Water drains away immediately instead of sitting under bare feet

Slip-resistant even when wet

The area underneath the mat dries, so mould has nothing to grow in

Mildew and mould resistant

Tiles lift out one at a time for hosing down and go straight back

Lightweight and easy to lift for cleaning

A safer walkway without laying permanent flooring

Who it is for

  • Swimming pool and leisure facility suppliers
  • Hotel, spa and sauna fit-out buyers
  • Marine, deck and patio product distributors
  • Retailers selling bathroom and wet-room safety flooring

Problems it solves

  • Wet tiled floors around pools are the most common slip hazard in a leisure facility
  • Standing water breeds mould and creates a smell in changing areas
  • Solid mats trap water underneath and stain the floor below
  • Cleaning schedules in wet areas are frequent and labour-heavy

Application scenarios

  • Swimming pool surrounds
  • Showers, saunas and wet rooms
  • Bathroom floors
  • Outdoor deck and patio areas

Technical features

  • Open-grid structure across the full tile
  • Interlocking edges for continuous runs along a pool surround
  • Closed-cell EVA - the foam itself does not absorb water
  • Mould and mildew resistant
Specifications

Pool Grid EVA Foam Mat Technical Data

Figures below are the factory specification for this line. Anything marked TBC is confirmed per order rather than guessed at.

Product NamePool Grid EVA Foam Mat
MaterialEVA foam
Thickness1 cm - 4 cm (customizable)
Size30x30 cm, 50x50 cm, 60x60 cm (customizable)
Density70-75 kg/m3
HardnessShore C 36
Formamide Index< 200 ppm
CertificatesREACH, EN71, BSCI, ISO 9001, ISO 14001
PackingShrink-wrapped inner + carton outer
MOQTBC - confirm with sales
Lead Time30 days for regular orders

Materials

Closed-cell EVA foam. Non-toxic and environmentally friendly EVA and LDPE materials, with every batch tested.

Customization options

Custom sizes, thicknesses, colours, patterns and packaging. OEM and ODM branding available, including retail packaging and inserts.

How we specify a custom mat →

Certifications

REACH, EN71, BSCI, ISO 9001 and ISO 14001. Test reports are shared with serious buyers on request.

View the certificates →
Manufacturing and Quality Control

How This Mat Is Made and Checked

Compounding

EVA resin and additives are weighed and mixed to the density the order calls for - 70-75 kg/m3 for standard lines, 80 kg/m3 for tatami and rubber-blend tiles.

Foaming

The compound is foamed into blocks on our own foaming lines. This is the step that fixes density, hardness and how the mat will behave under load.

Lamination

Printed film or suede surfaces are laminated onto the foam base for the wood-grain, plush and printed puzzle lines.

Die-cutting

Blocks are cut to tile size and the interlocking puzzle teeth are die-cut. Cut accuracy is what decides whether the seams close cleanly on site.

Quality control

Incoming material checks, in-process inspection and final sampling before every shipment.

Packing and shipping

Shrink-wrapped inner packing with a carton outer, loaded close to Shanghai and Qingdao seaports.

Comparison

How It Compares With Our Other Lines

ProductKey specificationBest suited to
Pool Grid EVA Foam MatOpen grid, drains water, 70-75 kg/m3Pool surrounds, showers and saunas
Cross Pattern EVA Foam MatSolid closed surface, cross embossDry training rooms
Plush EVA Foam MatVelvety surface, solid tileDry residential and hotel interiors
Use Guide

Laying and Maintaining the Floor

Lay the tiles directly on the existing hard floor - no adhesive is required.

Keep a clear run to the nearest drain so the water that passes through has somewhere to go.

Lift and hose the tiles on the facility's normal cleaning cycle.

Let the tiles drain before relaying them.

Replace individual tiles rather than the whole run when one is damaged.

Questions Buyers Ask

Pool Grid EVA Foam Mat - Buyer Questions

Will the mat stay in place when wet?

The tiles interlock on all four sides, which holds the run together, and the open grid keeps water from building up under the foot.

Does the foam absorb water?

No. The EVA is closed-cell and resistant to water, mould and mildew, which is why the tile can be hosed down and reused.

Can it be used outdoors on a deck?

Yes. Outdoor deck and patio areas are one of the listed applications.

What sizes are available?

30x30 cm, 50x50 cm and 60x60 cm are standard, and sizes are customizable.

Can you supply in our own packaging?

Yes. OEM and ODM branding and packaging is part of our standard service.

Get a Quote on the Pool Grid EVA Foam Mat

Send the size, thickness, colour, packaging and quantity. We reply within 24 hours, Monday to Saturday, and samples go by express with the courier charge refunded on your first bulk order.