i-Poster LED Screen
A slim, lightweight i-Poster LED screen designed for front maintenance and multiple installation options in retail, exhibition and indoor display environments. The cabinet features a narrow bezel and wide 160 degree viewing angle for consistent image quality across a room.
i-Poster LED Screen
A slim, lightweight i-Poster LED screen designed for front maintenance and multiple installation options in retail, exhibition and indoor display environments. The cabinet features a narrow bezel and wide 160 degree viewing angle for consistent image quality across a room. Peak brightness reaches 1200 nits, three times higher than standard LCD displays, ensuring visibility in well-lit spaces. The screen supports multiple control methods and allows content changes without disassembly.
- Front service access enables maintenance without rear access space, ideal for wall-mounted or tight installations
- Slim edge design with 160 degree wide viewing angle ensures consistent image quality from all angles
- Lightweight cabinet reduces structural load and simplifies handling during installation and transport
- 2880Hz refresh rate eliminates screen flicker and motion blur, suitable for fast-moving content
- 1200 nits peak brightness ensures clear visibility in bright indoor environments like retail stores and lobbies
- Multiple installation methods allow use as a standalone poster, wall-mounted display, or freestanding unit
Where This Screen Is Used
- Retail store entrances and product zones where high visibility and front access are required
- Exhibition booths and trade shows where quick setup and content updates are needed
- Corporate lobbies and conference rooms with ambient lighting and multiple viewing positions
- Museum displays and interactive installations that need a slim, modern profile
- Temporary or rotating advertising spots in shopping malls where screens are frequently repositioned
Who It Is For
- Retail chain operators needing dynamic, front-accessible digital signage
- Exhibition contractors setting up temporary displays with fast turnaround
- AV integrators installing digital posters in high-traffic indoor spaces
- Corporate facilities managing internal communication screens with minimal maintenance access
- Municipal or event organisers deploying temporary digital displays in public areas
Problems It Solves
- Screens that require rear access are unusable when mounted flat against a wall with no service corridor
- Traditional displays with low refresh rates show flicker and motion blur during fast content transitions
- Low brightness screens become washed out in bright indoor lighting, reducing content legibility
- Fixed cabinets with no front service access force full disassembly to replace modules
- Wide bezels and narrow viewing angles limit visibility from side positions in open spaces
Technical Features
- Front serviceable cabinet with no rear access required for module replacement
- Slim edge design with minimal bezel for a seamless visual appearance
- 2880Hz refresh rate for smooth motion and flicker-free playback
- 1200 nits peak brightness for visibility in well-lit indoor environments
- 160 degree wide viewing angle with accurate colour reproduction across all angles
- Multiple control methods supported for flexible content management and remote updates
i-Poster LED Screen Technical Data
| Installation | Indoor fixed or portable |
|---|---|
| Service Access | Front only |
| Cabinet Size | Not specified |
| Peak Brightness | 1200 nits |
| Refresh Rate | 2880Hz |
| Viewing Angle | 160 degrees |
| Cabinet Material | Not specified |
| Lamp Type | Not specified |
| Weight per Square Metre | Not specified |
| Pixel Pitch | Not specified |
Pixel pitch, resolution and refresh rate are confirmed against your viewing distance and wall size when we quote. Send those two figures and we will return the exact configuration.
Materials
- Slim-profile cabinet frame with lightweight construction
- Front-accessible module housing with internal locking mechanism
- LED lamps with wide viewing angle and high brightness output
- High-refresh-rate driver ICs for stable signal processing
How This Screen Is Built
- SMT placement of LED lamps and driver ICs on the module PCB
- Reflow soldering followed by automated soldering inspection
- Auto drying and module ageing test before assembly
- Cabinet assembly with module alignment and front panel integration
- Full screen installation test and screen ageing test before packing
Quality Control
- Soldering inspection on every module after reflow
- Module ageing test to catch early-life lamp and driver failures
- Screen installation test with the cabinets built up as a full wall
- Screen ageing test on the assembled wall before it is dismantled for shipping
Customisation Options
- Cabinet size selected to fit the intended display area and viewing distance
- Pixel pitch specified based on the expected viewing distance and content type
- Mounting method chosen to match the installation surface: wall, floor stand, or freestanding
- Control method configured to support the client’s content management system
How It Compares With the Alternatives
| Rear-service indoor fixed screen | Front service allows installation against walls with no rear access, but requires a different cabinet design and may have higher cost per unit |
|---|---|
| Standard rental LED cabinet | The i-Poster is lighter and designed for fixed or portable use, not repeated rigging, but offers better visual clarity and front access |
| LCD digital signage | The i-Poster has higher brightness, wider viewing angle, and faster refresh rate, reducing flicker and improving readability in bright spaces |
Use Guide
- Choose pixel pitch based on the closest viewing distance rather than cabinet count
- Confirm the mounting surface can support the screen weight before installation
- Keep front service access clear of obstructions to allow module removal and replacement
- Use the provided control methods for content updates and avoid third-party software
- Request a screen ageing test at the factory and review the assembled wall in the showroom before shipment
Related Products
Perimeter LED Display Screen
A slim and lightweight perimeter LED display screen with a 960x960mm aluminium die-cast cabinet, designed for bo…
View Product →
Rental LED Screen A Series
A rental LED screen series built for touring and event applications with a slim, lightweight aluminium die-cast …
View Product →
Bright Curtain LED Screen
A bright curtain LED screen with a lightweight aluminium cabinet designed for high transparency and low weight, …
View Product →
Indoor Fixed With High Definition
An indoor fixed LED screen with front maintenance and high definition, built on a 640x480mm die-cast aluminium c…
View Product →Projects Using This Product
Questions About the i-Poster LED Screen
Can this screen be mounted flat against a wall?
Yes. The front service design allows full access to modules without requiring any space behind the screen.
How bright is the screen compared to an LCD?
The screen reaches 1200 nits peak brightness, which is three times brighter than a standard LCD display.
Is the refresh rate high enough for fast-moving content?
Yes. The 2880Hz refresh rate ensures smooth playback with no flicker or motion blur.
Can I change the content without disassembling the screen?
Yes. The screen supports multiple control methods, allowing content updates without physical access to the cabinet.
What viewing angles does the screen support?
The screen offers a 160 degree wide viewing angle with consistent colour and brightness across all positions.
Is the cabinet lightweight for transport?
Yes. The cabinet is designed to be lightweight for easy handling during installation and relocation.
What pixel pitch should I choose?
Send the viewing distance and wall dimensions on WhatsApp and we will recommend the appropriate pixel pitch and cabinet layout.
Quote the i-Poster LED Screen for Your Project
Send the wall dimensions and the closest viewing distance. We will confirm the pitch, the cabinet count, the resolution and the shipping weight.