When Transparency Is the Design Requirement
For storefronts, retail facades, and architectural glazing, a screen must let light through without blocking the view. The MASTARLED Transparent Glass LED Screen uses a high transparent ratio with pixel pitches of 2.5, 3.91, 7.8 and 10.4mm, allowing visibility through the display while showing content. It is built with aluminium and acrylic cabinets for structural stability and clean aesthetics.
When Weight and Outdoor Durability Matter Most
The Bright Curtain LED Screen weighs as little as 15kg per square metre and is designed for outdoor use with anti-salt resistance, high cooling performance and ultra-low power consumption. It uses a traditional DIP solution with IP65 rating on both front and rear, and a 2-in-1 power and signal cable to reduce installation complexity and cost.
See the Transparent Glass LED Screen specification for the figures quoted above.
Rear Service Versus Full Access Design
The Transparent Glass LED Screen is rear service only, meaning access to modules, power supplies and receiving cards is from behind the screen. This requires a walkable corridor behind the installation. The Bright Curtain LED Screen supports both front and rear access, allowing maintenance from the viewing side or the back, depending on site conditions.
Cabinet Material and Customisation Options
The Transparent Glass LED Screen uses aluminium and acrylic cabinets, which provide rigidity and a sleek finish. The Bright Curtain LED Screen uses aluminium cabinets in multiple standard sizes, with full customisation available for width, height and depth to fit specific mounting structures.
Installation and Power Efficiency
The Bright Curtain LED Screen uses a 2-in-1 cable for power and signal, reducing the number of cables needed and lowering installation time and cost. The Transparent Glass LED Screen does not specify cable type in the facts, but its rear service design requires access from behind the wall during setup and maintenance.
How to Choose Based on Project Needs
Choose the Transparent Glass LED Screen for indoor or outdoor architectural glazing where a clean, transparent look is required and a rear corridor is available. Choose the Bright Curtain LED Screen for outdoor installations with high wind, salt exposure, or where weight and power efficiency are critical, and when both front and rear access are needed.
