Stainless Steel Sculpture
320cm Stainless steel root DJ office desk sculpture
A stainless steel root-shaped sculpture is designed for an office interior, where its organic form contrasts with the straight lines of desks and walls. This 320 cm piece is a hollow, hand-formed structure made from 304 or 316 stainless steel, intended to stand as a focal point on a desk or in a reception area. The listed size is 320 cm, and like most items in this catalogue, it is made to custom size on request. The surface is mirror polished, brushed, or painted, depending on the environment. Production time is 25 to 30 days, with transport taking 15 to 20 days after that.
| Material | 304 or 316 Stainless steel |
|---|---|
| Size | 320 cm, or custom size |
| Surface | Mirror, brushed finishing or painting |
| Production Time | 25 to 30 days |
| Transport Time | 15 to 20 days |
| Packing | Outer standard wooden crate, inner in plastic or foam |
Dimensions and materials outside this table are confirmed against your duty sheet before quotation.
Key Benefits
What This Nozzle Gives You
- A root form adds organic movement to a corporate or executive office space
- Hollow construction keeps weight low for indoor installation on desks or floors
- 304 for general office use or 316 where humidity or air conditioning systems are present
- Mirror, brushed or painted finish from the same shell ensures consistent surface treatment
- 320 cm as listed, or any size the office needs, made to specification
- Wooden crate with inner plastic or foam packing protects the surface during transit
Application Scenarios
Where It Is Installed
- An executive office where a single sculptural object defines the space without blocking sightlines
- A corporate reception area that needs a landmark piece to welcome visitors
- A high-end office lobby where the sculpture reads against glass and polished floors
- A private office desk where the piece acts as a conversation starter and visual anchor
- A conference room entrance where the root form suggests growth and connection
Who It Is For
Buyers Who Specify It
- Office designers specifying a sculptural element for a corporate or executive space
- Art consultants sourcing a custom metal sculpture with a natural form for a business environment
- Interior architects integrating a piece that balances organic shape with industrial material
- Corporate clients wanting a bespoke desk sculpture that reflects innovation and stability
Problems It Solves
What It Fixes on the Line
- An office interior that feels sterile and lacks a visual anchor or narrative
- A desk or reception area with no object to draw the eye or define the space
- Off the shelf sculptures that are too small or too generic for a high-end office
- A commission that starts with a photo of a root form but no technical drawing
- A need for a durable indoor sculpture that does not require maintenance or repainting
Technical Features
How It Is Built
- Hollow shell formed from plate metal over a mould, shaped by hand to a root-like form
- Welds ground and polished to blend with the surface, so the joint is not visible
- 304 or 316 stainless steel body depending on the indoor environment
- Mirror, brushed or painted finish applied to the same shell for consistency
- Custom size as standard, not as a special order, with the company stating spheres from 25 mm to 10 m
Materials
Body Materials and Where Each One Suits
- 304 stainless steel for general indoor office environments
- 316 stainless steel where humidity or chemical exposure is a factor
- Mirror polish for a reflective surface that shows the room and people around it
- Brushed finishing to reduce glare and hide minor handling marks
- Painting where the design calls for a solid colour rather than reflection
Manufacturing Process
How the Part Is Made
- Scheme design based on the office space, including form, scale and finish
- Small clay model created and scaled up with internal support structure designed
- Plaster mould taken from the model to shape the metal plate
- Plate forged to the mould and ground repeatedly to build the root form
- Surface polished, brushed or sprayed to match the chosen finish
- Welded assembly on site if required, with joint finished to match the shell
Quality Control
What Is Checked Before It Ships
- The company states it runs its own professional QC team
- Welds are ground and polished to be invisible on the finished surface
- Repeated grinding before surface treatment is part of the published method
- Inner plastic or foam padding inside the wooden crate protects the surface
Customization
What Can Be Changed to Suit You
- Any size to specification; the company states stainless steel spheres from 25 mm to 10 m
- Mirror, brushed, painted or coloured finish from the same base shell
- 304 or 316 body to suit the indoor exposure
- Ordered from a photograph or a drawing supplied by the customer
- Base and fixing detail designed for desk or floor installation
Comparison
How It Compares With the Alternatives
| A painted steel desk sculpture | Painted steel may cost less initially but requires repainting over time; stainless steel holds its finish permanently |
|---|---|
| A fibreglass root sculpture | Fibreglass is lighter and cheaper but cannot be mirror polished and is not suitable for high-traffic office spaces |
| A solid metal sculpture | Solid construction increases weight and cost; hollow form reduces weight while maintaining structural integrity |
| A geometric office sculpture | Geometric forms are precise and modern, but a root shape introduces organic flow and visual interest |
Use Guide
Fitting and Running It
- Set the sculpture where it has space to be seen from multiple angles, not blocked by furniture
- Choose 316 stainless steel if the office has high humidity or air conditioning systems
- Plan 25 to 30 days for production and 15 to 20 days for transport from the order date
- Clean the surface with water and a soft cloth; avoid abrasives that damage the polish
- Specify the finish—mirror, brushed or painted—based on the lighting and colour scheme of the office
- Confirm the base and fixing method with the team before delivery, especially for desk or floor installation
Questions Buyers Ask
320cm Stainless steel root DJ office desk sculpture Questions
What size is this office desk sculpture and can it be made larger?
The listed size for this piece is 320 cm, and like most of this catalogue it is also made to custom size. The company states stainless steel sculptures from 25 mm up to 10 m in diameter or height.
Which stainless grade will I get for this office sculpture?
This sculpture is made in #304 or #316 stainless steel. Tell us whether the office has high humidity or air conditioning systems and we will confirm which grade suits the environment.
Mirror, brushed or painted finish?
All three are available for this piece. Mirror gives the strongest reflection, brushed reduces glare and hides handling marks, and painting is used where the scheme wants colour.
How long from order to delivery for this sculpture?
The listing states a production time of 25 to 30 days. Transport takes 15 to 20 days after that, so plan from the date the office space must be ready.
How is this sculpture packed for delivery?
In an outer standard wooden crate with inner plastic or foam padding, which protects the polished surface during transit.
Can you build one from a picture I have?
Yes. The workshop takes orders according to a photograph or a drawing from the customer. Send the reference image, the size you want, and where it will be placed in the office.
Related Products
Others in the Stainless Steel Sculpture
Outdoor square apartment art deco stainless steel sphere sculpture
View specification
Outdoor square apartment art deco stainless steel spray sculpture
View specification
Interior home decoration art stainless steel wall sculpture
View specification
240cm Outdoor square decorative art stainless steel abstract spiral sculpture
View specification
Ask About 320cm Stainless steel root DJ office desk sculpture
Send the liquid, the pressure at the nozzle and the thread on your header. Trial samples can be sent free of charge and samples can be ready within 10 days.